StarTech.com ST4300USB3GB Bruksanvisning
StarTech.com
USB-hubb
ST4300USB3GB
Läs nedan 📖 manual på svenska för StarTech.com ST4300USB3GB (2 sidor) i kategorin USB-hubb. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Product Diagram (ST4300USB3)
Port Function
1Power LED • is receiving power.Solid: Hub
2USB-A Ports (4) • Used to connect USB devices to the .Hub
Port Function
3Power Port • Used with the , to power the Power Adapter
Hub.
4USB-B Port (Host) • Used to connect the to the Host Computer
Hub.
Requirements
For the latest requirements, please visit ,
www.startech.com/ST4300USB3 www.startech.
com/ST4300USB3EU, www.startech.com/ST4300USB3GB
or
4 Port Black SuperSpeed USB 3.0 Hub
1
Installation
1. Connect the included power adapter to the USB hub. The power LED should light
up solid. Supplying external power is optional, however to ensure each USB port is
fully powered, connecting external power is recommended.
2. Connect the USB cable from the USB hub (type B port) to the host computer system.
NOTE: If connected to a USB 2.0 host port, the hub will only operate at USB 2.0 speeds.
3. The operating system should detect the hub immediately and automatically install
it.
4. Once installation is complete, USB 1.x/2.0/3.0 devices should be able to be
connected to the hub and recognized.
Specications
Bus Interface USB 3.0
Number of Ports 4
Chipset ID VLI VL810
Connectors • USB-A x 4
• USB-B x 1
• DC Power x 1
LEDs Power x 1
Maximum Data Transfer Rate USB 3.0L 5 Gbps
Enclosure Material Plastic
Power Adapter 5VDC, 2000mA, type M plug
Operating Temperature 0°C~55°C (32°F~131°F)
Storage Temperature -20°C~85°C (-4°F~185°F)
Humidity 5%~95% RH
Dimensions 152.0mm x 59.6mm x 23.5mm
Weight 480g
2
34
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment.
For the State of California
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 0.5cm
between the radiator and your body.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a two year warranty.
For further information on product warranty terms and conditions, please refer to .
www.startech.com/warranty
Limitation of Liability
In no event shall it be the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or
agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
• If product has an exposed circuit board, do not touch the product under power.
Mesures de sécurité
• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
Misure di sicurezza
• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
Produktspecifikationer
| Varumärke: | StarTech.com |
| Kategori: | USB-hubb |
| Modell: | ST4300USB3GB |
Behöver du hjälp?
Om du behöver hjälp med StarTech.com ST4300USB3GB ställ en fråga nedan och andra användare kommer att svara dig
USB-hubb StarTech.com Manualer
5 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024
USB-hubb Manualer
- USB-hubb Sony
- USB-hubb Anker
- USB-hubb Icy Box
- USB-hubb Gembird
- USB-hubb Livoo
- USB-hubb LC-Power
- USB-hubb Targus
- USB-hubb Vivanco
- USB-hubb Sitecom
- USB-hubb TP Link
- USB-hubb Manhattan
- USB-hubb Logik
- USB-hubb Tripp Lite
- USB-hubb Hama
- USB-hubb Ednet
- USB-hubb Digitus
- USB-hubb NGS
- USB-hubb Speed-Link
- USB-hubb Sven
- USB-hubb Vaddio
- USB-hubb Trendnet
- USB-hubb Xtorm
- USB-hubb Conceptronic
- USB-hubb Terratec
- USB-hubb Vorago
- USB-hubb Crestron
- USB-hubb Logilink
- USB-hubb Extron
- USB-hubb BML
- USB-hubb Panduit
- USB-hubb Astell&Kern
- USB-hubb Fun Generation
- USB-hubb Tams Elektronik
- USB-hubb Konig Electronic
- USB-hubb Salicru
- USB-hubb BZBGear
- USB-hubb TEKLIO
- USB-hubb IOPLEE
- USB-hubb CSL
- USB-hubb Primewire
Nyaste USB-hubb Manualer
11 December 2024
10 December 2024
10 December 2024
10 December 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
14 Oktober 2024