SurgeX SX-DS-158 Bruksanvisning

SurgeX Inte kategoriserad SX-DS-158

Läs nedan 📖 manual på svenska för SurgeX SX-DS-158 (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

SX- -158, SX- -208, SX- - i, SX- - i DS DS DS 1011 DS 1611

User Manual

I. Product Overview

The SurgeX Defender Series are AC surge suppressors and power filters designed to be installed in a 19-inch/48.26

cm equipment rack. 120V and 240V models are available to match global power requirements.

Model

Voltage

Current

Input Plug

Output Receptacles

SX- - DS 158

120 V

15A

NEMA 5- 15P

8, 15RNEMA 5-

SX- - DS 208

120 V

20A

NEMA 5- 20P

2, NEMA 5-20R

6 NEMA 5- , 15R

SX- - i DS 1011

240 V

10A

IEC C14

11, IEC C13

SX- -16 i DS 11

240 V

16A

IEC C20

11, IEC C13

II. Installation

The Defender Series are designed to be installed in a 19-inch/48.26 cm equipment rack and require one unit (1-U) of

rack space. Use the four screws provided with the product to secure the rack ears to the rack rails. These screws can

be tightened by hand and do not require tools.

120V Models (SX- -158, SX- -208): Connect power to the unit by plugging the attached power cord into a DS DS

properly wired and grounded supply receptacle.

240V Models (SX- - , SX- - i): Connect power to the unit by plugging an appropriately rated 3 wire DS 1011 DS 1611

grounding type power cord into a properly wired and grounded supply receptacle. The socket-outlet shall be installed

near the equipment and shall be easily accessible.

Do not plug the unit into a relocatable power tap.

The maximum current rating of each individual receptacle, and of the unit as a whole, must not be exceeded:

Model

Total Maximum Current

Maximum Current Per Outlet

SX- - DS 158

15 A

SX- - DS 208

20 A

6 Outlets, 15A

2 Outlets, 20A

SX- - i DS 1011

10 A

10A

SX- -16 i DS 11

16 A

10A

Plug the equipment cords into the receptacles as needed.

III. Indicators

Located on the front panel is a green LED. System On

All models: When the LED is illuminated, there is AC power at the AC mains input to the product, and at System On

each of the product’s outlets.

SX- -158, SX- -208: When the DS DS System On LED is not illuminated, one of the following conditions is true:

• There is no power at AC mains input, or

• The supply receptacle is mis-wired, with the Line and Neutral conductors reversed, or

• The supply voltage is too high (> 180V ± 10V), or

• The input circuit breaker has tripped.

SX- - i, SX- - i: When the DS 1011 DS 1611 System On LED is not illuminated, one of the following conditions is true:

• There is no power at AC mains input, or

• The input circuit breaker has tripped.

IV. Specifications

Parameter

Specification

Voltage Rating

SX- - DS 158

SX- - DS 208

120V, 50/60Hz

SX- - i DS 1011

SX- - i DS 1611

240V, 50/60Hz

Load Rating

SX- - DS 158

15A Total, 15A Per Outlet

SX- - DS 208

20A Total, 15A per 5-15R, 20A per 5-20R

SX- - i DS 1011

10A Total, 10A Per Outlet

SX- - i DS 1611

16A Total, 10A Per Outlet

Power Requirement (no load)

Voltage

Protection Rating

SX- - DS 158

SX- - DS 208

330V All Modes

SX- - i DS 1011

SX- - i DS 1611

None Assigned

EMI/RFI Filter

Normal Mode

(50Ω Load)

SX- - DS 158

SX- - DS 208

> 30dB, 70kHz 50MHz –

SX- - i DS 1011

SX- - i DS 1611

> 30dB, 80kHz 50MHz –

Common Mode

(50Ω Load)

SX- - DS 158

SX- - DS 208

> 30dB, 60kHz 30Mhz –

SX- - i DS 1011

SX- - i DS 1611

> 20dB, 130kHz 34MHz –

> 30dB, 300kHz 15MHz –

Over-Voltage Auto

Shutdown

SX- - DS 158

SX- - DS 208

180V ± 10V

Automatically restores at 170V ± 10V

SX- - i DS 1011

SX- - i DS 1611

Overload Protection

All

Circuit Breaker

Dimensions

19" W x 8.5" D x 1.75" H / 48.26 cm W x 21.59 cm D x

4.5 cm H

Weight

SX- - DS 158

SX- - DS 208

6.5 lbs. / 2.95 kg

SX- - i DS 1011

SX- - i DS 1611

5.0 lbs 2.27 . / kg

Temperature Range

All

5C to 35C

Humidity Range

All

5% to 95% R.H. Non-condensing

Agency Listings

SX- - DS 158

SX- - DS 208

Conforms to UL Std. 1449

Certified to CSA Std. C22.2 No. 8

SX- - i DS 1011

SX- - i DS 1611

Certified to IEC 60950-1 (In Process)

Produktspecifikationer

Varumärke:	SurgeX
Kategori:	Inte kategoriserad
Modell:	SX-DS-158

Behöver du hjälp?

Om du behöver hjälp med SurgeX SX-DS-158 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad SurgeX Manualer

SurgeX SA-20-AR Bruksanvisning

11 December 2024

SurgeX SX-N240 Bruksanvisning

11 December 2024

SurgeX Axess Elite SX-AX20E Bruksanvisning

11 December 2024

SurgeX SEQ-1U Bruksanvisning

11 December 2024

SurgeX SX-DS-158 Bruksanvisning

11 December 2024

SurgeX SX1120RT Bruksanvisning

25 September 2024

SurgeX SA-82 Bruksanvisning

15 September 2024

SurgeX SA-20 Bruksanvisning

15 September 2024

SurgeX UPS-1000-OL Bruksanvisning

15 September 2024

SurgeX SA-1810 Bruksanvisning

15 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Gorenje T850DPB Bruksanvisning

5 Januari 2025

Ecler VEO-AEXS4 Bruksanvisning

5 Januari 2025

Taiji HC-6 Bruksanvisning

5 Januari 2025

Taiji HC-11UV Pro Bruksanvisning

5 Januari 2025

Gem Toys 1908C Bruksanvisning

5 Januari 2025

Taiji HC-38UV Bruksanvisning

5 Januari 2025

Frigidaire FDHP4336AS Bruksanvisning

5 Januari 2025

Taiji HC-8 Bruksanvisning

5 Januari 2025

Taiji HC-21UV Pro Bruksanvisning

5 Januari 2025

Magivaac RWC10 Bruksanvisning

5 Januari 2025