Syscom KDP-602GD Bruksanvisning

Läs nedan 📖 manual på svenska för Syscom KDP-602GD (2 sidor) i kategorin Intercomsystem. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
Button
Internal call and
communication
Power Lamp
To check power and operating status:
ON : Power ON /
Communication Connected
OFF : Power OFF
Flicker : Call ringing
Name of Each Part
EXPANSION DOOR PHONE(KDP-602GD)
1.
As this device consists of precise electronic components, and high
voltage is generated internally, do not attempt to disassemble.
2.
Do not drop lndoor or outdoor station, and avoid strong impact.
3.
When cleaning, never use wet hands, volatile benzene or paint thinner.
4.
Keep away from humidifier and stove. High temperature and humidity
can cause malfunction
5.
Maintain the product clear by frequently cleaning doorstation with
soft cloths
6. This product is doorphone which works with Lobbyphone model
KLP-C420 / C420R and Repeater KVS-A4P/A8P.
7. Recommed to use an external DC adaptor provided by kocom,
if not, this may cause bad quality of audio.
Precautions for Operation
!
Button
D s w soor open hen thi
button i pre eds ss .
A evailable only for th
door equipped itw h
door opener.
Volume
control
To control calling
s .ignal volume
Description KDP-602GD
Electric source DC 13±1V only (External DC 15V adadptor)
Power Consumption In Load 2.5W
Sound Electronic chime
Wiring 4 Wired in polarity
Vcc / GND / Audio / +13V
From KVS-A4P/A8P to the last KDP-602GD,
max. 80M using CAT5 single cable, and
150M using CAT5 pair cables.
"From KLP-C420 / C420R to the last KDP-602GD,"
max. 150M using CAT5 single cable,
and max. 300M using CAT5 pair cables.
Cable Specs.
and max. distance
Specifications
How to operation
DOORPHONE
KDP-602GD USER S MANUAL
1. Communcation with lobbyphone (KLP-C420 / C420R)
2. Internal call and communication
(1) A visitor makes a call to the house.
(2) The doorphone rings.
(3) Pick up the handset to start communication with visitor.
(4) When communicacation ends, hang up the handset.
(1) Pick up the handset and press button on the doorphone.
(2) The extended monitor or doorphone is ringing.
(3) Then, when the handset of the extended doorphone is picked up,
the internal communication starts.
(4) When communicacation ends, hang up the handset.
3. Door open
When the door open button is pressed during the communication
between the lobbyphone and the doorphone, door opens.
A- Choose a place on the wall where you want to hang the
DOOR PHONE.
B- Fasten the wall hanger on the wall.
C- DOOR PHONE can be hung on the wall hanger easily now.
Installation
N0530KDP-602GD
·Doorphone ·Wall hanger Pannel
Component
·Install wire ·Screw
3×12mm (2ea)
LOB_
4
HOUSE1
4
1
HOUSE2
4
1
1
2
4
KDP-602GD
Warranty Card
MODEL
DATE PURCHASED
WARRANTY PERIOD
AGENCY
AGENCY ADDRESS
KOCOM Warranties the original purchaser of this product as follows.
1) This product is produced under strict quality control and inspection procedures.
2) If this product breaks down during proper use as a result of product defect, KOCOM will repair it within one year
from date of purchase as free of charge.
3) The following cases will be subject to charge, even during warranty period:
a. Breakdown during transport, or through careless treatment,by consumer.
b. Breakdown caused by unauthorized repair, or system modification.
c. Breakdown caused by natural disaster or power disorder.
Wiring Diagram
OUT
OUT
IN
IN
4
4 4 4
4
4
1. VCC
2. GND
3. AUDIO
4. +13V
※ How to connect +15V DC adaptor
On EX_POWER PORT of KVS-A4P/A8P, connect a DC 15V adaptor and connect them to +13V and GND of the doorphone in parallel.
Connect pin no. 1(+13V) and no. 2(GND) of On LOB_IN or LOB_OUT PORT of KVS-A4P/A8P to +13V and GND of the doorphone in parallel.
VCC
GND
AUDIO
+13V
Polarity
EX_POWER LOB_OUT LOB_IN CN1
4
1
HOUSE1
4
1
HOUSE2
4
1
HOUSE3
4
1
HOUSE4
4
1
HOUSE5
4
1
HOUSE6
4
1
HOUSE7
4
1
HOUSE8
4
1
4
1
5
1
1
2
1. VCC
2. GND
3. AUDIO
4. +13V
KDP-602GD
BOT VIEW
4 wire polarity
ADAPTER
DC 15V/2A
KVS-A4P
KVS-A8P
KVS-A4P
KVS-A8P
ADAPTER
DC 15V/2A
+15V
GND
EX_POWER
1. VCC
2. GND
3. AUDIO
4. +13V
KDP-602GD
BOT VIEW
4 wire polarity
1. VCC
2. GND
3. AUDIO
4. +13V
+15V
GND
LOB_OUT
EX_POWER
4
1
HOUSE1
4
1
HOUSE2
4
1
HOUSE
4
1
1
2
KVS-A4P
KVS-A8P
KVS-A4P
KVS-A8P

Produktspecifikationer

Varumärke: Syscom
Kategori: Intercomsystem
Modell: KDP-602GD

Behöver du hjälp?

Om du behöver hjälp med Syscom KDP-602GD ställ en fråga nedan och andra användare kommer att svara dig




Intercomsystem Syscom Manualer

Intercomsystem Manualer

Nyaste Intercomsystem Manualer