TP Link Omada Pro S4500-16GP Bruksanvisning

TP Link Växla Omada Pro S4500-16GP

Läs nedan 📖 manual på svenska för TP Link Omada Pro S4500-16GP (2 sidor) i kategorin Växla. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Omada Pro Gigabit Smart Switch

1. To access the management page of the switch, open a browser and type

the switch’s IP address in the address eld, then press the Enter key.

If the switch obtains IP address from the DHCP server (typically a router), nd

the switch’s IP address on the DHCP server.

If not, use the default IP address to launch the switch’s 192.168.0.1

management page.

Note: Make sure the switch and computer are in the same subnet.

2. admin Enter for both the username and password in the lower case letters

to log in. The rst time you log in, change the password to better protect

your network and devices.

3. After a successful login, the main page will appear. You can click the menus

on the top side and left side to congure the corresponding functions.

Installation Guide

Conguration

LED Explanation

For the detailed congurations, refer to the User Guide and CLI Guide. The

guides can be found on the download center of our ocial website:

https://www.tp-link.com/support/download/.

Method 1: Standalone Mode

Switch PC

In Standalone Mode, use a computer to congure and manage the switch.

The switch supports two conguration methods:

Standalone Mode: Congure and manage the switch singly.

Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as

access points, switches, and gateways.

Note: When the switch is changed from Standalone Mode to Controller Mode, congurations of the switch will be lost. For details, refer to the related documents on the download center of our

ocial website: https://www.tp-link.com/support/download/.

Note:

1. PoE ports can also connect to non-PoE devices, but only transmit data.

2. Maximum PoE power is 30 W for each PoE port, and 62 W (for S4500-8GP)/61 W (for S4500-8GP2F) for all PoE ports.

3. PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as

a result of client limitations and environmental factors.

For simplicity, we will take S4500-8GP2F for example throughout the Guide.

Note:

1. Port 8 is a PD (Powered Device) port that supports being powered by a PSE (Power Sourcing Equipment) which

complies with LPS or PS2 standard and 802.3af/at standard.

2. The DC power input takes precedence over the PD port. If the DC input fails, the PoE input on the PD port will

supply power instead.

Ethernet Ports (1–8)

AC Power Cord

DC Power Adapter

Internet

PSE

LED S Explanationtatus

P erow

On Power on

S temys

F F Systlashing lashing: em running normally

Link/Act

(port 1–8)

On (Green) Running at 1000 Mbps

On (Yell w) Running at 10/100 Mbpso

F Transmitting/receiving datalashing

No connected device

SPF1/SFP2

(For S4500-

8GP2F)

On (Green) Running at 1000 Mbps

On (Yell w) Running at 100 Mbpso

F Transmitting/receiving datalashing

No connected device

PoE Status

(For Port 1-4 of

S4500-8GP/Port

1-8 of S4500-

8GP2F)

On Providing PoE power

Flashing

Current-ov rt-cir t/Connected erload/Sho cui

to a non-standard PD/Power exceeded the

Not providing PoE Power

PoE MAX

(For S4500-8GP/

S4500-8GP2F)

On Remaining power supply ≤ 7W

Flashing Remaining pow k for er supply eeps ≤ 7 W

mor tese than 2 minu

Remaining power supply

> 7W

Connection for PoE Switch

Ethernet Ports (1–8)

PC IP Camera AP IP Phone

PoE Devices

DC Power Adapter

AC Power Cord

Internet

SFP Slots

Connection for Non-PoE Switch

For simplicity, we will take S4500-8G for example throughout the Guide.

TP-Link hereby declares that the device is in compliance with the essential requirements

and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and

(EU)2015/863.

The original EU declaration of conformity may be found at

https://www.tp-link.com/en/support/ce/

EU declaration of conformity

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

To ask questions, find answers, and communicate with TP-Link users or

engineers, please visit https://community.tp-link.com to join TP-Link

Community.

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need service, please

Do not use damaged charger or USB cable to charge the device.

Do not use any other chargers than those recommended.

Adapter shall be installed near the equipment and shall be easily accessible.

Place the device with its bottom surface downward.

The plug on the power supply cord is used as the disconnect device, the socket-outlet

shall be easily accessible.

TP-Link hereby declares that the device is in compliance with the essential requirements

and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and

Electrical Equipment (Safety) Regulations 2016.

The original UK declaration of conformity may be found at

https://www.tp-link.com/support/ukca/

UK declaration of conformity

Option 2: Controller Mode Choose a type of controller:

Type 2: Omada Pro Cloud-Based ControllerType 1: Omada Pro Software Controller

If you want to use the software controller, get a PC with Windows or Linux OS,

contact the sales staff to get the installation package of Omada Pro Software

Controller, then install and launch it.

To manage your devices, the software controller needs to continually run on

your computer. Licenses need to be purchased additionally.

1. Make sure that Cloud Access is enabled on your controller and your

controller has been bound with your TP-Link ID.

2. Launch a web browser and enter https://omada.tplinkcloud.com in the

address bar. Log in with your TP-Link ID. A list of controllers that have been

bound with your TP-Link ID will appear. Then you can launch the controller

to adopt and manage devices.

Local Management

1. Launch the software controller on your PC. After the initiation process, the

controller automatically opens its web page. If not, click Launch a Browser

to Manage the Network.

2. On the controller’s web page, follow the wizard to complete the quick

setup.

Note: The controller must have network access to your devices in order to find, adopt, and

manage them.

3. After the quick setup, the login page appears. Enter the username and

password you created and click . Then you can adopt and manage Log in

devices.

Remote Management

Note: Before you start, make sure that both your controller and PC can access the

internet.

1. Contact the sales staff to grant the Omada Pro Cloud-Based Controller

permission.

2. Launch a web browser and enter https://omada.tplinkcloud.com in the

address bar. Log in with your TP-Link ID.

3. + Add ControllerClick and choose to add an Cloud-Based Controller

Omada Pro controller. Then you can launch the controller to adopt and

manage devices.

Omada Pro Cloud-Based Controller is a good alternative without the need to

install the software controller on a PC.

Licenses need to be purchased additionally.

Switch

Router

Clients

AP APAP

Omada Cloud

Switch

Router

Clients

Controller

Omada Pro Software Controller

running on the Host PC

AP AP

* Management via Omada App

1. Download and install the TP-Link Omada app from App Store or

Google Play.

After configuring a software controller/cloud-based controller via the

web, you can use the Omada app to manage your controller.

2. Make sure that Cloud Access is enabled on your controller and your

controller has been bound with your TP-Link ID.

Scan for Omada Omada

3. Launch the Omada app and log in with your TP-Link ID. Then go to

Cloud Access. A list of controllers that have been bound with your

TP-Link ID will appear. Then you can launch the controller to adopt

and manage devices.

Note: For the cloud-based controller, skip step 2.

Produktspecifikationer

Varumärke:	TP Link
Kategori:	Växla
Modell:	Omada Pro S4500-16GP
Färg på produkten:	Zwart, zilver
Bredd:	1016 mm
Djup:	50.8 mm
Höjd:	50.8 mm
Förpackningens vikt:	11980 g
Förpackningens bredd:	1094 mm
Djuppackning:	182.8 mm
Förpackningshöjd:	988 mm
Blåtand:	Ja
På / Av knapp:	Ja
Bluetooth-version:	4.0
Anslutningsteknik:	Bedraad en draadloos
Ethernet LAN:	Ja
Medföljande kablar:	AC, Audio (3.5mm), HDMI, RCA, TOSLINK Digital Optical
Antal USB 2.0-portar:	1
Genomsnittlig effekt:	- W
Bluetooth Low Energy (BLE):	Ja
Inbyggda ljudavkodare:	DTS Studio Sound, DTS TruSurround, DTS TruVolume, Dolby Digital
Audio Return Channel (ARC):	Ja
Ljudutgångskanaler:	5.1 kanalen
Diameter drivrutin subwoofer (imperiaal):	6.5 "
Frekvensomfång:	35 - 20000 Hz
Para:	40 "
Signal-brusförhållande:	101 dB
Upphängningssystem för väggen:	Ja
AUX ingång:	Ja
Soundbar högtalare RMS effekt:	- W
Total harmonisk distorsion (THD):	1 procent
Medföljande subwoofer:	Ja
Digitalt ljud optiskt in:	1
Soundbar vikt:	1551 g
Subwooferns frekvensområde:	35 - 170 Hz
Subwooferns bredd:	614.6 mm
Höjd på subwoofern:	77.7 mm
Subwooferns djup:	333 mm
Vikt subwoofer:	4350 g
Fjärrkontroll ingår:	Ja
Digital ljudingång (koaxial):	2
Wifi:	Ja
Satellithögtalares frekvensområde:	150 - 20000 Hz