TP Link TL-SX105 Bruksanvisning

TP Link Växla TL-SX105

Läs nedan 📖 manual på svenska för TP Link TL-SX105 (2 sidor) i kategorin Växla. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
Installation Guide
© 2021 TP-Link
7106509195 REV1.0.1
5-Port 10G Multi-Gigabit Desktop Switch
Note:
The images in this guide are only for example and may not reect your actual experience.
On: Power on
O: Power o
Panel Explanation
Power
Connection
Ethernet Ports (1–5)
Router
LAN PortWAN Port
TL-SX105
Power Adapter
Port
When one of the LED is on/ashing:
On: Connecting to a device but no activity.
Flashing: Transmitting or receiving data.
Left LED (10G/5G):
Green: Running at 10 Gbps.
Amber: Running at 5 Gbps.
Right LED (2.5G/1G/100M):
Green: Running at 2.5 Gbps.
Amber: Running at 100/1000 Mbps.
10G/5G 2.5G/1G/100M
Internet
Kensington Security Slot
Secure the lock (not provided) into
the security slot to prevent the
device from being stolen.
10G
NAS/Server
Gaming
Computer
Workstation 2.5G
Wi-Fi 6 AP
8K Video
Standard
Protocol
Interface
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
Specications
General Specications
Network Media (Cable)
MAC Address Table
Switching Capacity
Transfer Method
MAC Address Learning
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Environmental and Physical Specications
0 C to 40 C (32 F to 104 ˚ ˚ ˚ ˚F)
-40 C to 70 C (-40 F to 158 ˚ ˚ ˚ ˚F)
10% to 90%RH non-condensing
5% to 90%RH non-condensing
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3an
IEEE802.3bz, IEEE802.3x, IEEE802.1p
CSMA/CD
100BASE-TX:
2-pair UTP/STP of Cat. 5 or above (maximum 100 m)
1000BASE-T:
4-pair UTP/STP of Cat. 5e or above (maximum 100 m)
2.5GBASE-T:
4-pair UTP/STP of Cat. 5e or above (maximum 100 m)
5GBASE-T:
4-pair UTP/STP of Cat. 5e or above (maximum 100 m)
10GBASE-T:
4-pair UTP of Cat 6 (maximum 55 m) or STP of Cat 6,
6a, 7 (maximum 100 m)
5 100M/1G/2.5G/5G/10G RJ45 Ports
Auto-Negotiation/Auto MDI/MDIX
32K
100 Gbps
Store-and-Forward
Automatically learning, automatically aging
QoS (802.1p/DSCP), 802.3x ow control
100Base-TX: 148810 pps/port
1000Base-TX: 1488095 pps/port
2.5GBase-TX: 3720238 pps/port
5GBase-TX: 7440476 pps/port
10GBase-TX:14880952 pps/port
Q1. Why is the Power LED not lit?
Q2. Why are the right and left LEDs not lit when a device is
connected to the corresponding port?
Frequently Asked Questions (FAQ)
The Power LED should be lit when the power system is working
normally. If the Power LED is not lit, check as follows:
A1:
Make sure the power adapter is connected to the switch with
power source properly.
A2:
Make sure the voltage of the power supply meets the requirements
of the input voltage of the switch.
A3:
Make sure the power source is on.
It is recommended that you check the following items:
A1:
Make sure that the cable connectors are rmly plugged into the
switch and the device.
A2:
Make sure the connected device is turned on and works normally.
A3:
Make sure the cable category and length meet the standards listed
in General Specications.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR
code.
If you have any suggestions or needs on the product
guides, welcome to email techwriter@tp-link.com.cn.
To ask questions, find answers, and communicate with TP-Link users
or engineers, please visit https://community.tp-link.com to join
TP-Link Community.
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily
accessible.
Use only power supplies which are provided by manufacturer and in the origin packing of this
product. If you have any questions, please don’t hesitate to contact us.
Advanced Feature
Frame Forwarding Rate
Wall Mountable
Distance Bewteen
Mounting Holes 150 mm
Yes

Produktspecifikationer

Varumärke: TP Link
Kategori: Växla
Modell: TL-SX105

Behöver du hjälp?

Om du behöver hjälp med TP Link TL-SX105 ställ en fråga nedan och andra användare kommer att svara dig


Växla TP Link Manualer

TP Link

TP Link Omada ES210GMP Bruksanvisning

3 Januari 2025
TP Link

TP Link TL-SG605 Bruksanvisning

10 December 2024
TP Link

TP Link Festa FS328G Bruksanvisning

3 Oktober 2024
TP Link

TP Link TL-SG1016S Bruksanvisning

25 September 2024
TP Link

TP Link Festa FS352GP Bruksanvisning

23 September 2024
TP Link

TP Link Festa FS310GP Bruksanvisning

22 September 2024
TP Link

TP Link Festa FS308G Bruksanvisning

22 September 2024
TP Link

TP Link Festa FS328GP Bruksanvisning

22 September 2024
TP Link

TP Link Festa FS308GP Bruksanvisning

22 September 2024
TP Link

TP Link LS106LP Bruksanvisning

20 September 2024

Växla Manualer

Nyaste Växla Manualer

Ebara

Ebara ServoPress LP Bruksanvisning

15 Januari 2025
INOGENI

INOGENI CAM230 Bruksanvisning

14 Januari 2025
Schneider

Schneider CCT15225 Bruksanvisning

14 Januari 2025
Luxul

Luxul XMS-5248P Bruksanvisning

14 Januari 2025
Luxul

Luxul AMS-2624P Bruksanvisning

14 Januari 2025
Luxul

Luxul XGS-1005 Bruksanvisning

14 Januari 2025
Luxul

Luxul AGS-1008M Bruksanvisning

14 Januari 2025
Luxul

Luxul XMS-1208P Bruksanvisning

14 Januari 2025
Luxul

Luxul XMS-7048P Bruksanvisning

14 Januari 2025
Luxul

Luxul AMS-2600 Bruksanvisning

14 Januari 2025