Velleman ANTDVBT8 Bruksanvisning
Läs nedan 📖 manual på svenska för Velleman ANTDVBT8 (12 sidor) i kategorin Antenn. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
USER MANUAL
GEBRUIKERSHANDLEIDING
NOTICE D’EMPLOI
MANUAL DEL USUARIO
BEDIENUNGSANLEITUNG
ANTDVBT8
DVB-T DIGITAL USB ANTENNA
DIGITALE DVB-T-ANTENNE MET USB-AANSLUITING
ANTENNE TNT NUMÉRIQUE À CONNEXION USB
ANTENA TDT DIGITAL CON CONEXIÓN USB
DIGITALE DVB-T-ANTENNE MIT USB-ANSCHLUSS
ANTDVBT8_v2 VELLEMAN
2
ANTDVBT8
DVB-T DIGITAL USB ANTENNA
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device
after its lifecycle could harm the environment. Do not dispose of the unit (or
batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling. This device should be returned to your distributor or to a
local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this
device into service. If the device was damaged in transit, do not install or use it and contact your
dealer.
The ANTDVBT8 is a specially designed antenna for DVB-T reception. With its state-of-the-
art LNA technology and circuitry, it will provide the best reception. Your ANTDVBT8 should
come with 1 x antenna, 1 x USB power cable, 1 x base and this manual.
2. General Guidelines
• Damage caused by disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or problems.
• Keep the antenna away from interference sources such as air conditioners, hair dryers,
microwave ovens, etc.
• Install the antenna as high as possible, preferably near a window. Check the signal
strength and quality. Move the antenna to a better location if needed.
3. Installation
Connect the antenna to the receiver through the connection cable (2). For analogue TV use,
connect the antenna to the TV set through the connection cable (2) and power the antenna
using an appropriate PSU (not incl., use our PSSMV1) connected to the power input (1).
Extend the antenna (3) for better reception.
ANTDVBT8_v2 VELLEMAN
3
4. Technical Specifications
Power Supply
Through Digital Receiver 5VDC
Analogue TV Use 5VDC (PSU not incl.)
Frequency 47 ~ 870MHz (with FM trap)
Gain 20dB ± 3dB
Output max. 95dBµV
Revolving Angle 0° ~ 90°
Impedance 75Ω
Power Consumption < 1W
Weight 0.1kg
Dimensions 60.5 x 17.8 x 145mm
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use of this
device. For more info concerning this product, please visit our website
www.velleman.eu. The information in this manual is subject to change without prior
notice.
Produktspecifikationer
| Varumärke: | Velleman |
| Kategori: | Antenn |
| Modell: | ANTDVBT8 |
Behöver du hjälp?
Om du behöver hjälp med Velleman ANTDVBT8 ställ en fråga nedan och andra användare kommer att svara dig
Antenn Velleman Manualer
12 September 2024
Antenn Manualer
Nyaste Antenn Manualer
18 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
13 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024