WMD C4RBN Bruksanvisning

Läs nedan 📖 manual på svenska för WMD C4RBN (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
HP/BP/LP (LEDs & BUTTON): Cycle
through the 4 POLE frequency re-
sponses. The LED changes imme-
diately but the audio will wait until
the user has made their selection.
Holding the button will delay the
audio change until release.
FM: Inverting attenuator for
scaling the signal at the FM input
jack. Input is exponential and
controls lter cutoff.
V/OCT: Calibrated exponential CV
input for controlling lter cutoff in
the classic keytracking style.
PING: Sending a gate or trigger
into ping generates a fast decay
envelope emulating the response
of a vactrol.
C4RBN
4/2-POLE STATE-VARIABLE FILTER W/ WAVEFOLDING
LP/BP/HP/4 POLE: LP, BP, and HP
are the respective outputs of the
rst 2-Pole lter. 4P is the output
of the 2nd, series, 2-Pole lter with
selectable frequency response and
output wavefolder.
FREQ: Manual lter cutoff
frequency control. 2.5Hz to 10kHz
FOLD/SAT (LEDs & BUTTON):
Press this button to toggle the 4P
output wavefolder. The FOLD LED
will be lit if it is enabled. Hold this
button to cycle through 4 levels of
input saturation. The current level
is indicated by the SAT LED.
RES: Manual and CV control of
lter’s resonance. Self oscillates
above 3’Oclock.
SAT: Analog CV input for the input
saturator. Offers greater control
over the saturation level.
C4RBN builds on WMDs history with state-variable lters adding interface renements and
improved warm environment stability for live performance and beyond. A novel input saturation
circuit and the output wavefolder from WMD’s classic SYNCHRODYNE lter pair together to push
the timbral exibilty to the next level. C4RBN is the building block to life in your eurorack.
IN: Audio input passes through the
input saturator before entering the
rst 2-Pole lter.
SPECS:
Size: 4hp
PCB: 112mm
Depth: 38mm (with cables)
Power: +92mA, -82mA
Memory: 1 save / minute
Audio Input:
100k ohm impedance
20Vpp range
V/Oct Input:
82k ohm impedance
Temperature Compensated
CV Inputs:
>100k ohm impedance
Filter Outputs:
1k ohm impedance
20Vpp range

Produktspecifikationer

Varumärke: WMD
Kategori: Inte kategoriserad
Modell: C4RBN

Behöver du hjälp?

Om du behöver hjälp med WMD C4RBN ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad WMD Manualer

WMD

WMD C4RBN Bruksanvisning

20 September 2024
WMD

WMD Amplitude Bruksanvisning

10 September 2024
WMD

WMD Aperture Bruksanvisning

10 September 2024
WMD

WMD Spectrum Bruksanvisning

10 September 2024
WMD

WMD AXYS Bruksanvisning

9 September 2024
WMD

WMD Blender Bruksanvisning

9 September 2024
WMD

WMD S.P.O. Bruksanvisning

9 September 2024
WMD

WMD Arpitecht Bruksanvisning

9 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer