Wyse - Dell CX0LE Bruksanvisning

Läs nedan 📖 manual på svenska för Wyse - Dell CX0LE (5 sidor) i kategorin Övervaka. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
Mounting Bracket Installation
Instructions for Winterm
Thin Clients, Model SX0
The SX0 products include the S10, S30, S50, and S90 thin clients that can easily be
mounted vertically on a wall, horizontally under most desks, or mounted on most VESA
standard monitors using the Model SX0 mounting bracket. The bracket can be mounted
with the power supply holder either in the up or down position when vertical or the left or
the right when horizontal, for a total of four available mounting positions. The thin client
can be inserted with either the power button positioned towards the top or to the right.
Cables can be attached at any convenient time, as long as the power is disconnected. The
mounting bracket must be mounted vertically or horizontally using four (4) user-provided
#10 screws into a sturdy support such as a wall brace or solid desk. For flat-screen
monitor mounting, four (4) M4x10 mm mounting screws are provided.
Note
If installing on a hollow wall, any standard anchoring method may be used,
such as screws, butterfly anchors, or expansion bolts.
Notes
For flat-screen monitor mounting:
The bracket may need to be mounted horizontally with the connectors facing
down and the power button up, on the right or left.
Check with your monitor’s manufacturer for proper screw size and length
before assembling. If the four (4) M4x10 mm screws provided are not correct
for your bracket-to-monitor mounting requirements, user is to provide the
proper replacement.
Wall and Under-Desk Mounting Configuration
Use these instructions to mount the thin client vertically on a wall or horizontally under
most desks.
1. Remove the four horizontal feet from the thin client by sliding the feet towards the back
panel.
2. Use the mounting bracket as a template to mark the positions of the mounting holes
(see Figure 1).
2
Note
Leave at least 12.5 mm between the ventilation holes of the thin client and
any solid surface. An enclosed area must have a minimum of 150 square cm
of venting or other open area to maintain proper ventilation of the thin client.
Note
When determining location, take into account the cable lengths of the
monitor, keyboard, mouse, power supply, and peripherals.
Figure 1 Mounting Hole Placement
3. Install the user-provided wall anchors. Any standard anchoring method may be used,
such as screws, butterfly anchors, or expansion bolts.
4. Mount the bracket with four (4) user-provided #10 screws and snug the screws to hold
the mounting bracket firmly in place (don’t overtighten)
5. Align the thin client spine (from the back panel end) with the mounting bracket rails;
slide the thin client into the bracket until it snaps twice into place (see Figures 2 and 3).
Note
For thin client cooling requirements, position the thin client so that the power
button to the thin client is on the top when installing in the vertical position
and to the right facing you when installing in the horizontal position under a
desk.
3
Figure 2 Wall Mount
Figure 3 Under-Desk Mount
6. Attach the power adapter holder to the wall bracket using the two (2) M3x8 mm screws
provided and slide or rotate the thin client’s power adapter into the power adapter
holder.
Note
For power source convenience, you can attach the power adapter holder to
either end of the wall bracket.

Produktspecifikationer

Varumärke: Wyse - Dell
Kategori: Övervaka
Modell: CX0LE

Behöver du hjälp?

Om du behöver hjälp med Wyse - Dell CX0LE ställ en fråga nedan och andra användare kommer att svara dig




Övervaka Wyse - Dell Manualer

Övervaka Manualer

Nyaste Övervaka Manualer