Wyse - Dell VX0LE Bruksanvisning

Wyse - Dell Övervaka VX0LE

Läs nedan 📖 manual på svenska för Wyse - Dell VX0LE (4 sidor) i kategorin Övervaka. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/4
Wyse VX0L/LE Dual VESA Mount
Installation Instructions
The bracket enables a Wyse VX0L or VX0LE thin client to be mounted to a wall or on most
VESA compliant mounting surfaces and monitors. Both VESA 75 mm and 100 mm
mounting patterns are supported. The mounting bracket consists of two (2) pieces. The
larger bracket piece attaches to the mounting surface using the VESA mounting patterns.
User-provided hardware must be used that can withstand a force of 25 pounds (11.35
kilograms). The thin client is inserted in an upright position and cables are attached. The
smaller bracket piece attaches to the VESA compliant mounting monitor. The two bracket
pieces are then joined with four (4) thumb screws.
Notes
When determining location, take into account the cable lengths of the
monitor, keyboard, mouse, power supply, and peripherals.
Mount the thin client only as indicated; improper orientation (where the back
panel or front panel is facing down) could inhibit the dissipation of heat from
the device and damage it.
Do not enclosed the thin client in a confined environment without proper
ventilation. If you have questions, contact the Wyse Sustaining Engineering
Group.
2
Use the following instructions to mount the thin client:
1. Attach the larger bracket to the mounting surface (a swing arm mount is shown). The
mounting surface can have either the VESA 75 mm or 100 mm mounting pattern. The
bracket should be placed upright as shown. Secure the bracket with proper
user-provided hardware that can withstand a force of 25 pounds (11.35 kilograms).
Note
If installing on a hollow wall, any standard anchoring method may be used,
such as screws, butterfly anchors, or expansion bolts.
2. Slide the thin client into the mounted bracket using the pre-assembled guide rails until
it clicks into place.
3
3. Place the power adapter in the side pocket.
Note
If you have mounted the bracket to a wall, now is most convenient time to
attach all desired connections to the thin client.
4. Position the smaller bracket on the monitor as shown to match a set of mounting holes.
Both VESA 75 mm and 100 mm mounting patterns are supported. The bracket should
be placed with the turned edge on top (pointing downward). Secure with four (4)
user-provided screws (do not overtighten).
Note
If you have mounted the thin client bracket to a wall, now is most convenient
time to attach all desired connections to the monitor before assembling the
two brackets pieces together.

Produktspecifikationer

Varumärke: Wyse - Dell
Kategori: Övervaka
Modell: VX0LE

Behöver du hjälp?

Om du behöver hjälp med Wyse - Dell VX0LE ställ en fråga nedan och andra användare kommer att svara dig


Övervaka Wyse - Dell Manualer

Wyse - Dell

Wyse - Dell VX0 Bruksanvisning

13 September 2024
Wyse - Dell

Wyse - Dell CX0LE Bruksanvisning

13 September 2024
Wyse - Dell

Wyse - Dell VX0LE Bruksanvisning

13 September 2024

Övervaka Manualer

Nyaste Övervaka Manualer

LC-Power

LC-Power LC-M27-QHD-165-C-K Bruksanvisning

27 Oktober 2024
BenQ

BenQ FP72E Bruksanvisning

27 Oktober 2024
Eizo

Eizo DuraVision FDF2382WT Bruksanvisning

27 Oktober 2024
DataVideo

DataVideo TLM-170KM Bruksanvisning

27 Oktober 2024
Hikvision

Hikvision DS-D4218FI-162H Bruksanvisning

27 Oktober 2024
Planar

Planar LX1201PTI Bruksanvisning

27 Oktober 2024
HP

HP E27k G5 Bruksanvisning

26 Oktober 2024
AOC

AOC Q32G3SE Bruksanvisning

26 Oktober 2024
Sony

Sony ZRA-BH15D Bruksanvisning

26 Oktober 2024
Viewsonic

Viewsonic VG2720-2K-3 Bruksanvisning

26 Oktober 2024