Z CAM E2-F8 Bruksanvisning

Z CAM Kamera E2-F8

Läs nedan 📖 manual på svenska för Z CAM E2-F8 (47 sidor) i kategorin Kamera. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/47
Z CAM E2 Flagship Series
（
（
（
（（
Z CAM E2-S6 / E2-F6 / E2-F8
）
）
）
））
User Manual v0.2
Draft
( 3) Firmware 0.9
1. Introduction
1.1. Camera Introduction
1.2. Lens Mount
There are EF or PL lens mount options for Z CAM E2 flagship series, and MFT lens mount
for Z CAM E2-S6 only. It’s interchangeable and you can purchase additional lens mount
module to change it with professional tools (only for EF and PL lens mount) *.
Model
Lens Mount
Z CAM E2- S6
EF / PL / MFT
Z CAM E2 F6-
EF / PL
Z CAM E2 F8-
EF / PL
*
Replacement of lens mount is recommended to be operated by the manufacturer's
designated agent/dealer or under professional guidance. The failure of the camera may be
appearing due to changing the lens mount by the user.
MFT lens mount EF PL lens mount lens mount
1.3. LCD Screen
The content displayed on the LCD Screen will be different when the camera is in different
mode.
• Standby & Recording
• P review
Press FN + OK button when the camera is in Standby mode, it will switch to Preview
mode. Press FN + OK again to come back to Standby mode.
• P layback
Short press Power button when the camera is in Standby / Preview mode, it will
switch to Playback mode. Short press Power button again to come back to Standby
/ Preview mode.
1.5. Buttons
• MENU button: Enter / exit the camera setting ors, return to the previous menu in
camera settings.
• FN / ISO button : FN function in camera settings, or ISO quick setting in standby /
preview / recording mode by default.
• Up / SHT button: Up selection (or add value) in camera settings, or Shutter Speed /
Shutter Angle quick setting . in standby / preview / recording mode by default
• Down / EV button: Down selection (or reduce value) in camera settings, or EV quick
setting standby in . / preview / recording mode by default
• OK button: Confirmation in camera settings, or to trigger the Auto Focus function in
standby / preview / recording mode by default ( us and the with lens supports auto foc
Auto Focus function on the camera is enabled).
• F1 button : AEL (Auto Exposure Lock) by default.
• F2 button : Load profile by default .
• F3: Aperture quick setting by default.
• : F4 No function by default.
• Power button: Long press for 3 seconds to power on / off the camera, short press to
switch to / back from Playback mode.
Note: Quick setting function / OK / F1 / F2 / F3 / F4of FN / Up / Down buttons can be
changed in system menu (2.10 System – User button).
1.6. Interfaces
• Auxiliary Power Output: DC 12V -(2 pin LEMO socket), can supply power to other
devices.
• mRemote: 2.5 m jack socket, compatible with Sony LANC protocol.
• XLR audio-in: 5-pin LEMO port for dual-channel XLR microphone, require additional
XLR audio connector (compatible with ARRI Mini XLR connector).
• Control Port: 2 x serial port (4 pin aviation connector), support RS232 protocol.
• HDMI port: HDMI 2.0 Type A standard port
• Wi- Fi antenna port: Connect Wi- -Fi antenna to use, 2.4GHz / 5GHz Wi Fi antenna
port, support 802.11 b/g/n standard.
• Ethernet port: Gigabit Ethernet forport camera control, setting & live preview.
• USB Type C port: USB 3.0 standard. Can be connected to mobile devices for camera
control, setting and live preview, and be connected to computers for data transmission.
• (3.5mm Audio-in: 3.5mm (TRS) jack socket for stereo audio input Mic Level & Line
Level supported connect to microphone or audio output device.), can
• 3.5mm A -udio out: 3.5mm (TRS) jack socket for support stereo output, can be
connected to headset or earphone.
1.7. Power Options
• External Power Source: The camera comes with a power cable (D- -TAP plug end), D
TAP/DC connector，and can be connected to an AC/DC power adapter with 12V / 3~5A
output, and 2.1 x 5.5mm DC plug. (Power adapter not included in the package)
• -Camera Battery: The battery socket is compatible with SONY NP F series batteries,
including NP-F970/770/550 etc. (Battery not included in the package)
• V Mount Battery: Connect the camera to a V mount battery (with D- TAP port) with the
power cable - . (D TAP plug)
1.8. Storage
The camera uses CFast 2.0 card or SSD as storage.
• : CFast card The camera has 1 x internal CFast card slot, which supports CFast 2.0
standard. Insert the CFast card with correct direction, push it to the end until it’s locked.
To take out the CFast card, push in the card and it will be unlocked, then take it out
from the slot.
• -SSD: Connect the SSD through USB C port on back of camera as storage. (Note:
USB C port must be in “Host” mode, see - 2.9 Connect - USB)
Please not that the SSD will NOT be recognized if there is CFast card in the camera.
Attention: When using a CFast or SSD on Z CAM E2 for the first time, please format it
before recording (2.10 S stem y – Format Card).
2. Camera Settings
2.1. Quick Setting
When the camera is in Standby or Recording mode, some key settings can be quickly
accessed by pressing the buttons on the camera.
• ISO: Press FN to set ISO, then press Up / Down to adjust the value, and OK to
confirm.
• Shutter: Press UP to set shutter speed / angle (refer to 2.5 Ex – posure Shutter
Operation about shutter speed / shutter angle), then press Up Down / to adjust
the value, and to confirm.OK
• Aperture
：
：
：
：：
Press F3 to set the aperture, then press Up / Down to adjust the
value, and OK to confirm.
• EV: Press DOW N to set EV, then press / to adjust the value, and to Up Down OK
confirm.
• AF: When the lens supports auto focus and the Focus on the camera is set to AF,
press auto focusOK to trigger the . function
• : AEL (F1) Press F1 to lock the exposure, then press again to unlock
• Load profile
（
（
（
（（
F2
）
）
）
））
：Load the configuration saved in the camera. (2.10 System
User Profile).
Note: Quick setting function on the buttons can be changed in system setting (2.10
System – User B utton).
2.2. Record
• Resolution
- -Z CAM E2 S6
Resolution
Details
6244 4168x
Open Gate
6K UHD
5760 x 3240
6K DCI
6 144 x 3240
6K 2.4:1
6 x : ) 144 2592 (2.4 1 aspect ratio
5K 4:3
5 x 4552 164 (4:3 aspect ratio be use),can d with anamorphic
lens.
5K 6:5
4 x 4 d 992 160 (6:5 aspect ratio be use),can with anamorphic
lens.
4K Low (DCI
Noise)
4096 2160 x , Low Noise Mode*
4K DCI
4096 2160 x
4K 2.4:1
4096 x 1728 1 aspect ratio :(2.4 )
4K UHD (Low
Noise)
3840 x 2160, Low Noise Mode*
4K UHD
3840 x 2160
Super16 (16:9)
3392 1908 16 16 x 9(16: ), S mode，suitable for S cinema camera
lens.
FHD
1920 1080x
- - Z CAM E2 F6
Details
Open Gate
5760 x 3240
6064 x 3196
6064 2560 1 aspect ratio x :( 2.4 )
5 376 x 4032 3 aspect ratio(4: ), can be use anamorphicd with lens.
4 ) d 848 x 4040 (6:5 aspect ratio , can be use with anamorphic lens.
4096 x 2160
3840 x 2160
4096 x 1728 1 aspect ratio :(2.4 )
2112 16 x 91188 (16: ), S mode, suitable for S cinema camera 16
lens.
1920 1080x
- - Z CAM E2 F8
Resolution
Details
8K 2.4:1
8192 3456 x
8 K UHD
7680 4320 x
6K DCI
6144 3240 x
6K UHD
5760 x 3240
4K UHD
3840 x 2160
Super16 (16:9)
3392 1908 16 16 x 9(16: ), S mode, suitable for S cinema camera
lens.
* With lower noise in shadow area in this mode, but the jelly effect will be more obvious.
So it is suitable for static scenes shooting or less moving scene.
• Project FPS: Frame rate of the video project. It will be different for each camera when
the resolution is set to different values.
- Manual Input: Set the time code value manually 00:00:00:00
（ ）hour:minute: econd:s frame .
- Current Time: Set time according to the camera system setting time.
n Count Up: Rec Run / Free Run.
- Rec Run: Counts the time code only when recording video.
- : Free Run Counts the time code even when not recording video (including
when the camera is power off)
n Time Code Mode: DF / NDF.
- DF: The camera modifies the difference between recorded time and time
code. Seconds and frames are separated by “.”. (Example: 00:00:00.00)
- : NDF Records the time code without drop frame.Seconds and frames are
separated by “:”. (Example: 00:00:00:00)
n HDMI Display: On / Off. the display of time code through To enable / disable
HDMI output.
l Playback FR: Default / VFR. When it’s set to Default, the frame rate of playback will
be the same as set in Project FPS, when it’s set VFR, the frame rate of playback will
be the same as set in Variable Frame Rate (2.3 Video – ) Variable Frame Rate
For example: Set “ Project FPSRecord”-“ ” to 29.97, and “Video” “Variable Frame- R ate”
to If the "playback to the playback frame rate120. FR" is set “Default”, of the video is
29.97fps (4-fold slow motion). If the "playback frame rate" is set to ‘’Variable Frame
Rate’’, the playback frame rate of the video is 120fps (normal speed).
• Meta Setup: Set the camera metadata, IDinclude “Camera ” “ ”.and Reel Name
n Camera ID： A ~ Z
n Reel Name：001 ~ 999
• Pre Roll: On / Off. “Set Pre Roll” “ ”to ON , there would appear one red flashing circle
on the left of remaining recording time (See the below picture) . To press Record
button to start recording, the camera will automatically save the first 5 seconds
before pressing record button.
2.3. Video
• Variable Frame Rate (VFR): With VFR you can set a different frame rate for capturing
based on the Project FPS for recording, in this way you can get a slow-motion or fast-
motion footage.
VFR options are he and related to t Resolution Project FPS in Record setting. And
the maximum VFR is related to the exact camera model and resolution, see
below:
Z CAM E2- S6
Resolution
Max Va riable Frame Rate (fps)
6 x 244 4148
30
6 K DCI
48
6 K UHD
48
6 K 2.4:1
60
5 K 4:3
30
5 K 6:5
30
4 K DCI
75
4 K DCI (Low Noise)
30
4 K UHD
75
4 K UHD (Low Noise)
30
4 K UHD
60
Super16 (16:9)
60
*Each resolution to the highest variable frame rate subject to H.265 encoder standard.
• Encoder: H.264 / H.265 / ZRAW
The corresponding color bit depth and sampling of each encoding format are as
follows:
Encoder
H .264
H .265
ZRAW
Color Bit Depth
8bit
10 bit
1 2bit
Color Sampling
4 :2:0
4 :2:0
N/A
Max frame rate @30fps for ZRAW encoder.
• Bitrate: High / Middle / Low. Value of the bitrate varies in different resolution and frame
rate.
Resolution
Frame Rate Range
（
（
（
（（
fps
）
）
）
））
*
Bitrate
（
（
（
（（
Mbps
）
）
）
））
H
M
L
8K（8K 2.4:1，8K
UHD）
FR <= 30
5 00
4 00
2 00
6K 6K （Open Gate，
DCI，6K UHD 6K ，
2.4:1）
30 < FR < = 60
3 00
1 90
1 30
FR <= 30
2 50
1 60
100
5K 5K 4:3 5K 6:5（ ， ）
FR <= 30
2 50
1 60
100
4K 4K DCI 4K UHD（ ， ，
4K 2.4:1）/ Super16
(16:9)
FR > 60
300
200
160
30 < FR < = 60
230
150
100
FR <= 30
200
130
60
FHD
FR > 60
200
130
60
30 < FR < = 60
60
30
15
FR <= 30
30
20
10
* If VFR is activated, the frame rate here refers to the frame rate in VFR, otherwise it
refers to the frame rate in Movie Format.
For ZRAW, the bitrate is 
• Proxy Track: On / Off. trackTo enable or disable proxy recording during video
recording, “Oit will automatically n” when using ZRAW as recording encoder, which
will record a second video track (H.265) into the video file.
• Rotation: Normal / Upside Down. Rotate the image by 180 degrees.
Note: This setting is available only when the frame rate of recording is under 30fps
(include 30fps). The display on the LCD and the video output from HDMI will not be
rotated during preview and recording in current firmware, and only the video recorded
in the storage will be rotated when it’s set to “Upside Down”.
• Timelapse: Off / Manual, when it’s Off, the camera is in normal record mode. When it
is set lapse to a specific value, the camera is in time video mode.
l VFR Control
：
：
：
：：
Coarse / Fine
- Coarse：Adjust based on the camera’s preset value within the range of VFR
- Fine：VFR fine control within the range of VFR, 1 frame per step.
2.4. Audio
• Encoder: None / AAC / PCM
• Input: Off / Microphone / XLR / Mic Left + XLR Right / Mic Right + XLR Left
n . Off：Turn off all audio input
n Microphone：The camera will use built-in microphone as audio input if there is
no external microphone plugged into the 3.5mm audio-in port, and will use the
external microphone if there is one plugged into the 3.5mm audio- in port.
n - XLR：Take XLR port as audio in
n Mic Left + XLR Right: Take 3.5mm audio- (in microphone) left channel, and XLR
port right channel to merge for audio- in
n Mic Right + XLR Left: Take 3.5mm audio- (in microphone) right channel, and
XLR port left channel to merge for audio- in
• Input Level: Mic Level / Line Level
• - Input Gain: 18 ~ 6 dB, can be set manually.
• Output Gain: - 6 ~ 6 dB, can be set manually.
• Phantom Power: E nable / Disable. Available when “Input” is set to “XLR”,” Mic Left +
XLR Right” and “Mic Right + XLR Left” to enable or disable the phantom power of the
XLR port.
• Audio Level Display: Disable / Enable，enabling this setting displays the audio level
on the standby screen.
2.5. Exposure
• z Flicker Reduction：60H / 50Hz. It’s set to eliminate light flicking caused by the
frequency of the electricity, w . h ich is 60Hz in North America and some parts of Asia
(South Korea，Philippines，Taiwan of , And forChina) 50Hz China mainland, other
countries and regions.
• - ~ EV: 3.0 3.0
• Shutter Speed / Shutter Angle: This setting depends on whether “ tter Speed” or Shu
“Shutter Angle” is selected in 2.5 Exposure - Shutter Operation
Shutter Speed: Auto / Manual /8000（1~1 ” ）*
Shutter Angle: Auto / Manual（ °1 ~ 360°）
* The minimum shutter speed “1” is available only when" variable frame rate "is set to
“1”.
• Aperture: It shows the range of aperture of the lens, and can be adjusted manually if
it’s an electrical lens. Only for lenses with electronic contacts. If the lens used is a
purely mechanical without electronic contacts, the aperture value is not shown here.
• s ISO: ISO optional values depend on the etting in ISO control. The native ISO value
varies from different models.
ISO
400 ~ 125000
Z CAM E2 F6- : 0 400 / 250
Z - -CAM E2 S6 & E2 F8: 400 / 1250
• eND: (to be added later).
• Minimum ISO: This setting will only be enabled when ISO is set to “Auto”.
• Max ISO: This setting will only be enabled when ISO is set to “Auto”.
• Max Shutter Speed / Max Shutter Angle: This setting will be activated if Shutter
Speed / Shutter Angle is in Auto mode.
Max Shutter Speed: Auto / Manual （1” ~ 1/1600” ）*
Max Shutter Angle: Auto / Manual (1°~ 360°)
* Minimum shutter speed “1” is optional only when variable frame rate is set to “1”.
• Metering Mode: Center / Average / Spot, it sets the metering mode of exposure.
• Shutter Operation: Speed / Angle
• ISO Control: Fine / Native ISO
Fine: ISO can be set in detail value within ISO range (according to standard ISO
definition)
Native ISO: only native ISO can be selected.
• AE Speed: Slow / Normal / Fast
• Lock In Record: Off / On. Enable this function, it will automatically lock the exposure
during recording.
2.6. White Balance
• Mode: Auto / Incandescent / Cloudy / D10000 / Fluorescent / Daylight / Shade /
Manual
• Kelvin: When White Balance is set to “Auto” or “Preset Value”, it shows the current
color temperature, when White Balance is set to “Manual”, it can be adjusted
manually (2300 K ~ 7500 K)
• -Tint: 100 ~ 100, default is 0.
• Priority: Ambiance / White
- Ambiance: To increase the intensity of the image’s warm color cast when
shooting a tungsten- light scene.
- White: To reduce the intensity of the image’s warm color cast when shooting a
tungsten- light scene.
• Lock In Record: Off / On. Enable this function, it will automatically lock the white
balance during recording.
* AWB always use white priority in Z- Log2
2.8. Image
• -Image Profile: Rec.709 / Z Log2 / Flat / HLG
- Rec.709：It is Rec.709 like color space, which is usually used for directly output
- Z- 2Log ：It is the log developed by Z CAM, with 13 stops of dynamic range and
reserve more detain in highlight area, good enough for post processing.
- FLAT：It is 709 like curve with color information, and lower the contrast for easy
post processing.
- HLG (Hybrid Log-Gamma): Encode the high- -light and low light parts of the HDR
signal in two different ways - in which the low light part use the standard gamma
curve and the high- light part use the logarithmic curve.
• Sharpness: Strong / Medium / Week, default Medium.
• Brightness: 0~100, default is 50.
• Saturation: 0~100, default is 50.
• Contrast: 0~100, default 50.
• Luminance Level: Full / Limited. The range of luminance level is 0~255 when it’s set
to Full, and 16~235 when it’s set to Limited.

Produktspecifikationer

Varumärke: Z CAM
Kategori: Kamera
Modell: E2-F8

Behöver du hjälp?

Om du behöver hjälp med Z CAM E2-F8 ställ en fråga nedan och andra användare kommer att svara dig


Kamera Z CAM Manualer

Z CAM

Z CAM E2-F8 Bruksanvisning

2 September 2024
Z CAM

Z CAM E2C Bruksanvisning

31 Augusti 2024
Z CAM

Z CAM E2-S6 Bruksanvisning

31 Augusti 2024
Z CAM

Z CAM E2-F6 Bruksanvisning

31 Augusti 2024
Z CAM

Z CAM E2-M4 Bruksanvisning

30 Augusti 2024
Z CAM

Z CAM K1 Pro Bruksanvisning

29 Augusti 2024
Z CAM

Z CAM E2-F6 Pro Bruksanvisning

26 Augusti 2024
Z CAM

Z CAM E2 Bruksanvisning

25 Augusti 2024

Kamera Manualer

Nyaste Kamera Manualer

Marshall Electronics

Marshall Electronics CV228 Bruksanvisning

13 Mars 2025
AViPAS

AViPAS AV-1180 Bruksanvisning

13 Mars 2025
Ring

Ring Indoor Cam (2nd Generation) Bruksanvisning

11 Mars 2025
Voigtlander

Voigtlander Vitoret Bruksanvisning

25 Februari 2025
Fujifilm

Fujifilm X100VI Bruksanvisning

25 Februari 2025
Sony

Sony ZV-E10 II Bruksanvisning

25 Februari 2025
Rollei

Rollei flex Bruksanvisning

11 Februari 2025
Rollei

Rollei Sportsline 80 Bruksanvisning

11 Februari 2025
Rollei

Rollei Security Cam Mini Bruksanvisning

11 Februari 2025
Rollei

Rollei IPC-88 Bruksanvisning

11 Februari 2025