Atlona AT-AVA-EX70C-KIT Bruksanvisning

Atlona Wifi-repeater AT-AVA-EX70C-KIT

Läs nedan 📖 manual på svenska för Atlona AT-AVA-EX70C-KIT (12 sidor) i kategorin Wifi-repeater. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

Installation Guide

AT-AVA-EX70C-KIT

4K/UHD HDMI Extender Kit with Control and Remote Power

AT-AVA-EX70C-KIT

The Atlona AT-AVA-EX70C-KIT is an Avance™ Series HDBaseT transmitter and receiver set

that supports control pass-through and remote power capability. The kit transmits 4K/UHD

60Hz 4:2:0 video up to 130 feet (40 meters) or 1080P 60Hz video up to 230 feet (70 meters). In

addition to video with embedded multi-channel audio, RS-232 and IR control signals, and remote

power from the transmitter to the receiver are supported on the single CAT6A/7 cable. Integrated

HDBaseT link status testing allows quick verication of cable, termination, and link quality. HDMI

clock stretching and EDID ltering are included to ensure the integrity of video transmission as

well as compatibility with the widest array of sources and display devices. Compact enclosures

and included brackets allow the transmitter and receiver endpoints to be surface mounted

in furniture or behind a display. The AT-AVA-EX70C-KIT delivers a cost-eective solution for

extension of video, audio, control, and receiver power at resolutions up to 4K/UHD.

IMPORTANT: Visit https://atlona.com/product/AT-AVA-EX70C-KIT for the latest rmware

updates and Installation Guide.

1 x AT-AVA-EX70C-TX

1 x AT-AVA-EX70C-RX

1 x 2-pin captive screw connector

2 x 3-pin captive screw connector

1 x 4-pin captive screw connector

1 x 5-pin captive screw connector

1 x IR emitter

4 x Mounting brackets

8 x Mounting screws

1 x 48V DC power supply

1 x IEC cable

1 x Installation Guide

Package Contents

Installation Guide

AT-AVA-EX70C-KIT

HDBaseT IN HDMI OUT

AT-AVA-EX70C-RX

PWR

LINKFW

S SP

IR IN IR OUT

RX TX

RS-232

DC 48V HDBaseT OUT HDMI IN

AT-AVA-EX70C-TX

PWR

LINKFW

RX TX

RS-232

S S

IR IN IR OUT

TEST

Panel Descriptions

1 TEST

Quick and easy test for category cables.

Use the button to start the test and the

LED to determine pass or fail.

2 FW

Connect a micro-USB to USB-A type

cable from this port to a computer, to

update the rmware.

3 POWER and LINK LEDs

The power LED will illuminate green when

receiving power. The link LED will glow

yellow when signal is being sent/received

between the transmitter and the receiver.

4 DC 48V

Connect the included power supply to this

port.

5 RS-232

Bidirectional control port, used for pass

through of commands to or from the

receiver.

6 IR IN/OUT

Connect a 3rd party controller to the IR IN

port or an IR emitter to the IR OUT port.

7 HDBaseT OUT

Connect an HDBaseT cable from this port

to the port on the receiver.HDBaseT IN

8 HDMI IN

Connect an HDMI cable from a source to

this port. e.g. HDR BluRay Player

9 FW

Not used at this time.

10 POWER and LINK LEDs

The power LED will illuminate green when

receiving power. The link LED will glow

yellow when signal is being sent/received

between the transmitter and the receiver.

11 RS-232

Bidirectional control port, used for pass

through of commands to or from the

transmitter.

12 IR IN/OUT

Connect an IR receiver to the IR IN port or

an IR emitter to the IR OUT port.

13 HDBaseT IN

Connect an HDBaseT cable from this

port to the port on the HDBaseT OUT

transmitter.

14 HDMI OUT

Connect an HDMI cable from this port to

an HDMI display.

115 6 7 8 12 13 144

103 921

Installation Guide

AT-AVA-EX70C-KIT

HDBaseT IN

HDBaseT OUT

HDBaseT LED Descriptions

a Green LED

When a category cable is connected

and receiving signal this LED will be

illuminated. If no cable or signal is being

received, the LED will be o.

b Yellow LED

This LED displays the status of the

HDBaseT rmware. When the LED is

blinking slowly, the rmware is good. If

the LED is blinking rapidly or o, there

is no rmware or the rmware has been

corrupted.

b ba a

Pin out will be determined by the

RS-232 cable and connect as

RX (receive), TX (transmit) and

(Ground).

A 3-pin captive screw connector for RS-232 has been included.

Two captive screw connectors for IR have been included. A 4-pin connector for the transmitter

and a 3-pin connector for the receiver.

IR IN is connected by a power, ground, and signal

wire. Use a 12V IR receiver with it ( AT-IR-CS-RX e.g.

purchasable through atlona.com).

IR IN is connected by a ground and signal wire. Use

with 3rd party control systems. For easy termination,

Atlona recommends using the 2 meter IR cable AT-LC-

CS-IR-2M (purchasable through atlona.com).

IR OUT is connected by a ground and signal wire.

Use the included IR emitter with this port.

IR OUT is connected by a ground and signal wire.

Use the included IR emitter with this port.

RS-232

IR IN IR OUT

GND SSP

GND RX TXGNDRX TX

IR IN IR OUT

GND SS

Produktspecifikationer

Varumärke:	Atlona
Kategori:	Wifi-repeater
Modell:	AT-AVA-EX70C-KIT
Färg på produkten:	Zwart
Vikt:	254 g
Bredd:	200 mm
Djup:	80 mm
Höjd:	185 mm
Förpackningens vikt:	458 g
Förpackningens bredd:	193 mm
Djuppackning:	85 mm
Förpackningshöjd:	208 mm
Batterikapacitet:	400 mAh
Blåtand:	Ja
Bluetooth-version:	3.0+HS
Närfältskommunikation (NFC):	Ja
Anslutningsteknik:	Bedraad en draadloos
Frekvensband:	2.4 GHz
Medföljande kablar:	Audio (3.5mm), Micro-USB
Integrerad minneskortläsare:	Ja
Kompatibla minneskort:	MicroSD (TransFlash)
Snabbstartsguide:	Ja
Volymkontroll:	Digitaal
Plug and play:	Ja
Bärmetod:	Hoofdband
Rekommenderad användning:	Oproepen/muziek
Typ av headset:	Stereofonisch
Impedans:	4 Ohm
Placera högtalare hörlurar:	Supraaural
Hörlurars frekvensområde:	90 - 18000 Hz
3,5 mm-kontakt:	Ja
Mikrofontyp:	Ingebouwd
Batteri/Batteri laddningstid:	2 uur
Hörlurskänslighet:	70 dB
USB-anslutning:	Ja
2,5 mm-kontakt:	Nee
Laddningskälla:	USB
Kontrollknappar:	Track >, Volume +, Volume -
USB-kontakt:	Micro-USB
Total harmonisk distorsion (THD):	0.3 procent
Typ produkt:	Headset
Batterityp:	Ingebouwde accu
Laddbart batteri:	Ja