Atlona AT-OME-TX11-WP Bruksanvisning

Atlona AV extender AT-OME-TX11-WP

Läs nedan 📖 manual på svenska för Atlona AT-OME-TX11-WP (8 sidor) i kategorin AV extender. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
1
Installation Guide
AT-OME-TX11-WP
Omega 4K/UHD
Wallplate Transmitter for HDMI with USB
AT-OME-TX11-WP
The Atlona AT-OME-TX11-WP is an HDBaseT transmitter for video up to 4K/60 4:2:0, plus
embedded audio over distances up to 330 feet (100 meters). It features a US one-gang, wallplate
form factor, and includes interchangeable black and white wallplates and faceplates. Part of the
Omega™ Series of integration products for modern AV communications and collaboration, the
OME-TX11-WP is HDCP 2.2 compliant and is remotely powered over HDBaseT. This transmitter
is ideal for use with Omega Series receivers as well as switchers with HDBaseT inputs.
1 x AT-OME-TX11-WP
1 x White faceplate
1 x White Decora® wallplate (US 1-gang)
1 x Black faceplate
1 x Black Decora®
wallplate (US 1-gang)
2 x Mounting screws (course thread)
2 x Mounting screws (ne thread)
Package Contents
IMPORTANT: Visit http://www.atlona.com/product/AT-OME-TX11-WP
for the latest rmware updates and User Manual.
2
Installation Guide
AT-OME-TX11-WP
LINK
PWR
HDMI
AT-OME-TX11-WP
HDBaseT
OUT
CAN ICES-003(A)
/NMB-00(A)
05
4
1
23
1 PWR
This LED indicator glows solid green
when the unit is powered. Refer to
LED Indicators (page 5) for more
information.
2 LINK
This LED indicator glows solid amber to
indicate that the HDBaseT signal integrity
is good. Refer to LED Indicators (page
5) for more information.
3 HDMI
Connect an HDMI cable from this port to a
UHD/HD source.
4 HDBaseT OUT
Connect a category cable from this port
to the port of the AT-OME-HDBaseT IN
RX11 or other PoE-compatible receiver.
3
Installation Guide
AT-OME-TX11-WP
Faceplate Removal and Assembly
1. Unscrew the four Phillips-head screws from the sides of the faceplate, as shown:
2. Gently remove the faceplate by pulling it toward you.
3. Attach the new faceplate, then secure it using the four Phillips-head screws. Do not over-
tighten or apply high-torque devices to the screws. Doing so may damage the faceplate
and/or the screws.
4. Install the AT-OME-TX11-WP into the electrical box or mud ring.
5. Reattach the wallplate.
Removal of the faceplate requires that the AT-OME-TX11-WP be disassembled from the electrical
box or mud ring. A small Phillips-head screwdriver is required to remove the faceplate.
LINK
PWR
HDMI
AT-OME-TX11-WP

Produktspecifikationer

Varumärke: Atlona
Kategori: AV extender
Modell: AT-OME-TX11-WP

Behöver du hjälp?

Om du behöver hjälp med Atlona AT-OME-TX11-WP ställ en fråga nedan och andra användare kommer att svara dig




AV extender Atlona Manualer

AV extender Manualer

Nyaste AV extender Manualer