AudioControl LC2I Bruksanvisning

Läs nedan 📖 manual på svenska för AudioControl LC2I (4 sidor) i kategorin Audio/video-omvandlare. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
GREAT SOUND FROM
YOUR FACTORY RADIO!”
®
TWO CHANNEL LINE OUTPUT
CONVERTER WITH ACCUBASS
FACTORY SYSTE M UP GR A DE
“Maximum Processing with Minimal Eort
AudioControl’s new Matrix DSP processors
When you require total control and optimization to
achieve great sound quality, AudioControl Digital
Signal Processors are the solution. The powerful
DM-810™ DM-608™ and DSP processors allow users to
truly optimize the performance of their audio system, regardless
of whether they are using a factory or aftermarket source, and
to truly achieve our goal “Making Good Sound Great. These
highly versatile Digital Signal processors are equipped with
key features, such as active speaker-level inputs, line-level and
digital audio inputs, providing up to 10 channels of output.
AudioControl’s “smart user interface contains the power
of AudioControl processing through a exible PC interface
packed full of features and simply laid out. Includes signal
summing, 30 bands of equalization, signal time-alignment, in-
put delay and phase correction, plus AudioControl proprietary features like
AccuBASS®, GTO™ Signal Sense, and MILC™ as well as integrated input and output RTAs.
AccuBASS® Level control
AccuBASS®
Threshold control
3. If you hear a spot where the bass just drops right out…stop.
Leave the volume there and go to your LC2i.
4. Set the AccuBASS Level control on the top of LC2i to the ®
center detent.
5. Now, use a small screwdriver to turn the Threshold control
clockwise slowly until you hear the bass pop back in.
6. Re-adjust the AccuBASS Level control on the top of the unit ®
to get the proper amount of bass compensation, and you’re
ready for some ground pounding bass. OK, what if your bass
doesn’t roll o, but you still want more?
No problem! Turn the AccuBASS Level control fully down, ®
rotate the threshold control fully clockwise to lock in the bass
equalization. Now you can turn up the AccuBASS Level con®-
trol for the amount of bass you want.
Level Matching:
For a video on Level Matching go to:
https://youtu.be/fmR2VrXHfbg or scan the
code at the left.
GTO™ Selector
GTO™ Great Turn On: No need to look for a trigger wire.
However you still need power and ground.
Connect the speaker level inputs and as soon as you turn on
the factory audio system the LC2i will power up as well. After
the LC2i turns on, it provides a 12 volt trigger output to turn
on your amplier. A Jumper which you can reach from the
end panel allows you to set this feature on/o for specialized
installations. The factory default setting for the GTO™ circuit is
always ON.
Setting the AccuBASS® Bass Compensation:
Factory speaker systems have trouble reproducing loud
clean bass. Some companies systems limit the bass at higher
volumes so as not to damage speakers. The AccuBASS circuit ®
puts that bass back.
Heres how you set it up. After the LC2i /Amps/ and speakers
are installed and ready go:
1. Turn the system on and play some music with a good bass
track.
2. Turn the volume up while listening for the bass.
®
TWO CHANNEL LINE OUTPUT
CONVERTER WITH ACCUBASS
3. Your LC2i must have originally been purchased from an au-
thorized AudioControl dealer. You do not have to be the original
owner, but you do need a copy of the original sales slip.
4. You cannot let anybody who isn’t (A) the AudioControl
factory; (B) somebody authorized in writing by AudioControl to
service your LC2i
If anyone other than (A) or (B) messes with your LC2i , that
voids your warranty.
5. The warranty is also void if the serial number is altered or re -
moved, or if the LC2i has been used improperly. Now these sound
like big loopholes, but here is all we mean by it.
Unwarranted abuse is (A) physical damage (don’t use the LC2i
for a jack stand); (B) improper connections (120 volts into the
power jack can fry the poor thing); (C) sadistic things. This is the
best mobile product we know how to build, but if you mount it to
the front bumper of your car, something will go wrong.
6. If an authorized United States AudioControl dealer installs
your LC2i, the warranty is ve years, otherwise the warranty is one
year.
Assuming you conform to 1 through 6, and it really isn’t all that
hard to do, we get the option of xing your old unit or replacing it
with a new one.
Validate your warranty: Visit audiocontrolregistration.com to
register your LC2i.
Legalese Section
This is the only warranty given by AudioControl. This
warranty gives you specic legal rights, which vary from state to
state.
Promises of how well your LC2i will work are not implied by
this warranty. Other than what we’ve covered in this warranty,
we have no obligation, express or implied. Also, we will not be
obligated for direct or indirect consequential damage to your
system caused by hooking up the AudioControl LC2i.
Failure to send in a properly completed warranty card, negates
any service claims.
Specications:
Maximum speaker level input . . .400 watts per channel @4 Ohms
Maximum Preamp output 9.5Vrms/13V peak . . . . . . . . . . . . . . . . . . .
Optional Dash Level Control Remote . . . . . . . . . . . . . . .+0dB / -19dB
Frequency response. . . . . . . . . . . . . . . . . . . . . . . 33 Hz - 100 kHz; ±1dB
Total harmonic distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.01%
Signal to Noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >110dB
Input Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20K ohms
Output Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 ohms
Power draw .............................................150 mA
Recommended fuse rating.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Amp
Size (Chassis). . . . . . . . 3.25” x 1.5” x 5.4” (6.5” L including mounting)
Weight 1 pound ................................................
Conditional Warranty
People are scared of warranties. Lots of ne print, lots of
noncooperation, months of waiting around. Well, don’t be scared
of this warranty. Its designed to make you rave about us to your
friends. Its a warranty that looks out for you and helps you resist
the temptation to have your friend “whos good with electronics”
try to repair your AudioControl LC2i. So go ahead and read this
warranty, then enjoy your new component for a few days before
sending in the warranty card and comments.
“Conditional” doesn’t mean anything ominous. The Federal
Trade Commission tells all manufacturers to use the term to indi-
cate that certain conditions have to be met before they’ll honor
the warranty. If you honor these conditions, we will warrant all
materials and workmanship on your LC2i for ve years from the
date you bought it, if installed by an authorized AudioControl
dealer, and will x or replace it, at our option, during that time.
Here are the conditions that make this warranty conditional:
1. We need to know that you bought your product from an
authorized AudioControl dealer. So go to
www.audiocontrol.com or audiocontrolregistration.com right
away, and register your LC2i.
2. You must keep your sales receipt for proof of purchase,
showing when and from whom the unit was bought. Were not
the only ones who require this, so its a good habit to get into
with any major purchase.

Produktspecifikationer

Varumärke: AudioControl
Kategori: Audio/video-omvandlare
Modell: LC2I

Behöver du hjälp?

Om du behöver hjälp med AudioControl LC2I ställ en fråga nedan och andra användare kommer att svara dig




Audio/video-omvandlare AudioControl Manualer

Audio/video-omvandlare Manualer

Nyaste Audio/video-omvandlare Manualer