AudioSource AMP310VS Bruksanvisning

Läs nedan 📖 manual på svenska för AudioSource AMP310VS (12 sidor) i kategorin mottagare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
AMPLIFIER APPLICATION GUIDE
AMP 100
AMP 102
AMP 110
AMP 210
AMP 310
Amplifier Guide
AudioSource AMP series amplifiers are designed for home and commercial
audio distribution systems where high quality sound, flexibility, and reliability are
essential. The AMP series offers exceptional value and many features that will
make their installation and use easy and convenient.
The AudioSource AMP series consists of 5 amplifier models ranging from 50
watts per channel to 150 watts. The amplifiers share some common features with
intelligent industrial design, superior engineering and value as key components
to the AMP series success story.
AMP Series Products….. Value Priced Engineering Excellence!
All models incorporate the following features:
1. Bridgeable Outputs
2. Dual Stereo Inputs
3. Priority Input Switching (Automatic)
4. Heavy Duty Aluminum Faceplates
5. Stereo Line Outputs
6. Separate Volume and Balance Controls
7. 5-Way Binding Posts
8. A and B Speaker Selector Switches
9. Auto On (By-passable)
Amplifier Technology
The AMP 110, AMP 210, and AMP 310 incorporate very precise
circuit topology to ensure the best audio reproduction. Dual Differential Error
amplifiers ensure linearity and low noise operation. Triple Darlington output
stages ensure the amplifier can drive complex speaker loads without adding
distortion. In addition, toroidal power transformers are used with large filter
capacitors to create stunning audio dynamics.
Careful Engineering
When discussing AMP series products with your contractors it’s important to note
that the entire AMP series went through rigorous testing procedures in Portland,
Oregon by AudioSource’s engineering staff. Years of audio engineering
experience have been applied to these amplifiers to ensure years of use.
AMP100 AMP102 AMP110 AMP210 AMP310
Number of
Channels 2 2 2 2 2
Load
Impedance 8ohm 4ohm 8ohm 4ohm 8ohm 4ohm 8ohm 4ohm 8ohm 4ohm
Rated Output
Power 50 60 50 75 75 110 90 125 150 225
Frequency
Response 20-20kHz 20-50kHz 20-50kHz 20-50kHz 20-50kHz
Signal to
Noise Ratio 100dB 100dB 100dB 100dB 100dB
Input
Sensitivity 1.5Vrms
350mV-
2.8Vrms
350mV-
2.8Vrms
350mV-
2.8Vrms
350mV-
2.8Vrms
THD at Rated
Power <.2% <.1% <.1% <.1% <.1%
Dimensions
2.9"H x 16.5"W x
9.25"D
3.8"H x 16.5"W x
8.25"D
3.8"H x 16.5"W
x 13.75"D
3.8"H x 16.5"W x
13.75"D
5.5"H x 16.5"W x
13.75"D
Weight 12 lbs 14.7 lbs 23.1 lbs 24 lbs 33.1 lbs
AMP 100
Applications:
Ideal for use as a remote amplifier
Use with Whole House Distributed Audio Systems
Second Zone Amplifier
Amplify MP3 Players
Rear Channel Amplifier for Dolby 6.1 and 7.1 Systems
Perfect for Computers and Video Games
Key Features:
Affordable!
2 Independent channels rated at 50 watts into 8 ohms
60 watts per channel into 4 ohms
Independent level and balance control
Dual Auto-Switching Inputs
Auto Signal Sensing Power On
A/B Speaker selector
Bridgeable
Specifications
Power: 50 watts RMS @ 8 ohms
60 watts @ 4 ohms
Less than 0.2% THD into 8 ohms
Input Sensitivity 1.5 Vrms
S/N Ratio: 100 dB A-weighted
Frequency response: 20Hz to 20kHz

Produktspecifikationer

Varumärke: AudioSource
Kategori: mottagare
Modell: AMP310VS

Behöver du hjälp?

Om du behöver hjälp med AudioSource AMP310VS ställ en fråga nedan och andra användare kommer att svara dig




mottagare AudioSource Manualer

mottagare Manualer

Nyaste mottagare Manualer