BDI Sequel 6005 Bruksanvisning

BDI Byrå Sequel 6005

Läs nedan 📖 manual på svenska för BDI Sequel 6005 (2 sidor) i kategorin Byrå. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

C - 5/32” x 12mm

Phillips Screw

x 20

a s s e m b l y i n s t r u c t i o n s

bdiusa bdiusa.com customerservice@ .com

Your Sequel Home Office Furniture is engineered for easy assembly.

Carefully follow this procedure to prevent any damage.

Placement and Maintenance

Sequel Home Office Furniture is designed for indoor use on level floors.

Clean steel parts and wood veneer with a moist cloth.

Step 1

Unpack and Identify

Unpack and identify the components at left. Note that some components

are shipped inside the cabinet. The assembly workspace should be a non-

marring surface such as carpet. A Phillips Screwdriver will be needed for

assembly. For missing hardware pieces, please contact BDI Customer

Service at customerservice@bdiusa.com. For all other concerns, please

contact your BDI Retailer.

Step 2

Install Casters

Carefully position on its top surface so that bottom surface is Cabinet (B)

up, then attach a Caster at each of the five (5) exposed installation plates

using and a Phillips Screwdriver. 5/32” x 12mm Phillips Screw (C)

Component List

E - Center Caster x 1

F - Rear Caster x 2

J - Glass Top x 1

K - Legal File Folder

Stretchers x 4

D - Brake Caster x 2

B - Cabinet x 1

A - 4mm Allen Wrench x 1

‘Sequel’ is a trademark of Becker Designed, Inc.

Made in Taiwan. 6005REV121509v2

FRONT

C x 8

C x 4

C x 8

D x 2

E x 1

F x 2

6001

6002

6005

6006

6007

G - 5/32” x 22mm

Phillips Screw

x 4

I - 1/4”-20 x 15mm

Screw x 3

H - Drawer Pull x 2

Se q u e l

6005 t all file cabinet

Sequel

assembly instructions

bdiusa bdiusa.com customerservice@ .com

I x 3

G x 4

H x 2

Step 3

Install Handles.

Carefully turn pedestal upright so that it rests evenly on all

installed casters, then install one Drawer Pull (H) per drawer

using the 5/32” x 22mm Phillips Screw(G) and a Phillips

Screwdriver.

Step 4

Install Glass Top

Carefully place Glass Top (J) on pedestal’s top surface,

aligning the pre-installed pucks over the corresponding

mounting point on the pedestal. Attach Glass Top (J) by

opening drawer and fastening from underside (inside

drawer) using three (3) 1/4”-20 x 15mm Screws (I) with

provided Allen Wrench (A).

NOTE: Glass Top (J) fastens at three (3) points only---two

(2) near front edge and one (1) at center. Pucks near rear

edge do not accept screws and merely rest in place.

DO NOT OVER-TIGHTEN.

Step 5

File Folders

Users who wish to use legal-length files may install provided

Legal File Folder Stretchers (K) by dropping into place near

front and back of file drawers.

Produktspecifikationer

Varumärke:	BDI
Kategori:	Byrå
Modell:	Sequel 6005
Färg på produkten:	Grijs
Vikt:	- g
Bredd:	125 mm
Djup:	125 mm
Höjd:	255 mm
Förpackningens vikt:	3628 g
Förpackningens bredd:	188 mm
Djuppackning:	207 mm
Förpackningshöjd:	319 mm
Laddningstid:	3.5 uur
Blåtand:	Ja
Anslutningsteknik:	Bedraad en draadloos
Ethernet LAN:	Ja
Typ av strömkälla:	Batterij/Accu
Antal USB 2.0-portar:	1
Genomsnittlig effekt:	- W
Rekommenderad användning:	Universeel
USB-anslutning:	Ja
Ljudutgångskanaler:	2.0 kanalen
Högtalarplacering:	Tafelblad/Boekenplank
Antal förare:	2
Frekvensomfång:	50 - 20000 Hz
Paket innehåll:	Speaker, Charging Dock, QSG
Wifi:	Ja
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Strömförbrukning (typiskt):	36 W
Stöd för Multi-Room Streaming (MRS).:	Ja