Blustream EX40B-KIT Bruksanvisning

Läs nedan 📖 manual på svenska för Blustream EX40B-KIT (10 sidor) i kategorin AV extender. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/10
EX40B-KIT
User Manual
IR RX
CAT
Input
Link IR TX IR RX
Link IR TX
CAT
Output
EX40B-KIT USER MANUAL
02
www.blustream.co.uk
Surge protection device
recommended
This product contains sensitive
electrical components that may be
damaged by electrical spikes, surges,
electric shock, lightning strikes, etc. Use
of surge protection systems is highly
recommended in order to protect and
extend the life of your equipment.
Safety And
Performance Notice
The transmission distances of HDMI
over UTP cables are measured using TE
CONNECTIVITY 1427071-6
EIA/TIA-568-B termination (T568B) of
cables is recommended for optimal
performance.
To minimise interference of the un-
shielded twisted pairs in the CAT5e/6
cable do not run the HDBaseT /
Cat5e/6/6a cabling with or in close par-
allel proximity to mains power cables.
Do not substitute or use any other
power supply other than the enclosed
unit, or a Bluestream approved
replacement.
Do not disassemble either the
Transmitter or Receiver units for
any reason. Doing so will void the
manufacturer’s warranty.
Introduction 03
Features 03
Panel descriptions 04
Terminating the interconnecting CAT cable 05
Understanding the status lights 05
EDID Control 06
Infrared distribution 07
Application diagram 08
Specifications 09
Package contents 09
Maintenance 09
Contents
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions carefully
before connecting, operating or
adjusting this product. Please keep this
manual for future reference.
EX40B-KIT USER MANUAL
03
contact support@blustream.co.uk / support@blustream.com.au
Our EX40B-KIT HDMI™ extender set oers HDMI distribution over a single
CAT cable. The product delivers HDMI & B-directional IR up to lengths of
40m @ 1080p and 50m @ 1080i.
Introduction
FEATURES:
Extends HDMI 1080p up to distances of 40m over single CAT
cable
Extends HDMI 1080i and lower resolutions up to distances
of 50m over single CAT cable
Supports industry standard video resolutions 480i-1080p
and DVI formats up to 1920x1080
Supports 3D signal extension
Supports LPCM 7.1ch, Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio transmission (*Note - Audio type must
be forced by source hardware as in-built EDID management
is limited to 2ch)
Supports bi-directional IR from input and output locations
Smart EDID management
Supplied with Blustream IR receiver and emitter
Requires local power at both Transmitter and Receiver
HDCP compliant
WARNING!
Please read these instructions carefully before connecting, operating or adjusting this product. Incorrect termination of the RJ45
connecting cable may result in damage to the Blustream hardware.

Produktspecifikationer

Varumärke: Blustream
Kategori: AV extender
Modell: EX40B-KIT

Behöver du hjälp?

Om du behöver hjälp med Blustream EX40B-KIT ställ en fråga nedan och andra användare kommer att svara dig




AV extender Blustream Manualer

AV extender Manualer

Nyaste AV extender Manualer