Blustream HEX100HDVGA-TX Bruksanvisning

Blustream AV extender HEX100HDVGA-TX

Läs nedan 📖 manual på svenska för Blustream HEX100HDVGA-TX (9 sidor) i kategorin AV extender. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/9
HEX100HDVGA – RX/TX
User Manual
HDBT Out
Input
Select
RS232 DC12V
LINK Power
HEX100HDVGA
HDMI
LINK
HDMI in
Audio IR RX IR TX
VGA In
HEX100HDVGARX/TX USER MANUAL
02 www.blustream.co.uk
Surge protection device
recommended
This product contains sensitive electri-
cal components that may be damaged
by electrical spikes, surges, electric
shock, lightning strikes, etc. Use of
surge protection systems is highly
recommended in order to protect and
extend the life of your equipment.
Introduction 03
Features 03
Panel Descriptions 04
RS232 Control 06
Specifications 07
Package Contents 07
Maintenance 07
Contents
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions care-
fully before connecting, operating or
adjusting this product. Please keep this
manual for future reference.
HEX100HDVGA – RX/TX USER MANUAL
03
contact support@blustream.co.uk / support@blustream.com.au
Our HEX100HDVGA-KIT extender set is an industry leading 4K HDBaseT solution that
delivers switchable HDMI and VGA inputs. The extender set also transmits Bi-directional IR,
RS-232 and PoH (PoE) up to lengths of 100m over a single CAT cable.
NOTE: The POH function is designed for powering compatible transmitter or receiver units of Blustream only.
Do not connect any part of this equipment to power over Ethernet devices. Damage may result.
Introduction
Auto signal sensing switches between HDMI and VGA+
audio (analogue 3.5mm stereo audio) to HDMI output with
analogue le/right audio and coaxial digital outputs. Units
will switch when new signal detected.
Manual switching of HDMI and VGA/Audio input signal on
both Transmitter and Receiver units using manual or RS232
control.
HDMI input audio de-embedded onto analogue le/right
audio and coaxial digital outputs (Supports PCM audio only).
HDMI v1.4 and HDCP compliant, support 1080p@60Hz, 3D
and 4K.
Support 1080p@60Hz up to 100m, 4K up to 60m
Dolby TrueHD and DTS-HD master audio pass through HDMI
output
Support for all popular VGA resolutions: 640x480@60/75Hz,
720x400@70Hz, 800x600@60/75Hz, 1024x768@60/75Hz,
1152x864@75Hz, 1280x720@60Hz, 1280x768@60/75Hz,
1280x800@60/75Hz, 1280x960@60Hz, 1280x1024@60/75Hz,
1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz,
1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz,
1920x1080@60Hz
Bi-directional IR and RS232
RS232 supports bypass via HDBaseT link (default), input
switching control or firmware update.
POH (Power over HDBT) supported, only one power supply
needed at either transmitter or receiver side.
FEATURES:

Produktspecifikationer

Varumärke: Blustream
Kategori: AV extender
Modell: HEX100HDVGA-TX

Behöver du hjälp?

Om du behöver hjälp med Blustream HEX100HDVGA-TX ställ en fråga nedan och andra användare kommer att svara dig




AV extender Blustream Manualer

AV extender Manualer

Nyaste AV extender Manualer