CRUX VIMAD-84 Bruksanvisning

Läs nedan 📖 manual på svenska för CRUX VIMAD-84 (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
TO FACTORY
HARNESS
F-OPTIC
(male plug)
F-OPTIC
(male plug)
INTERFACE
F-OPTIC
(female plug)
BLUE/ VIDEO DEACTIVATION
RADIO MEDIA
PHONE
CLIM EAT
NAV
TRAFFIC
CAR SETUP
BLACK/ GROUND
RED/ 12V CONSTANT
SAFETY WARNING:
THIS INTERFACE IS DESIGNED TO ACTIVATE
VIDEO IN-MOTION TO ALLOW THE PASSENER
ACCESS TO THE ADDRESS INPUT WHILE THE
VEHICLE IS IN-MOTION. THIS INTERFACE MAY
CAUSE AN ERROR WHEN SERVICED AT THE OEM
DEALER. BE AWARE THAT MOST DEALERS
WILL ATTEMPT TO VOID THE MANUFACTURERS
WARANTY WHEN INSTALLING ANY AFTERMARKET
EQUIPMENT. IMPROPER USE OF THIS INTERFACE
BY THE DRIVER MAY RESULT IN CITATION. DRIVER
MUST KEEP FULL ATTENTION ON THE ROAD AND
RESPOSIBILITY ON THE SAFETY OF HIS
PASSENGERS.
INTERFACING SOLUTIONS
VIDEO IN-MOTION ACTIVATION FOR AUDI MMI 2G/3G/3G+ & VOLKSWAGEN RNS850 NAV RADIOS
Audi
2009 - 2014 A5
2009 - 2014 A6
2010 - 2014 A7
2010 - 2014 A8
2009 - 2014 Q5
2009 - 2014 Q7
2009 - 2014 S5
Volkswagen
2010 - 2014 Touareg
ONLY COMPATIBLE WITH:
- AUDI MMI 2G/3G/3G+ RADIOS.
- VOLKSWAGEN RNS850 NAV
VIMAD-84 We recommend reading this installation guide rst before starting any
work. Following these instructions from “Start” to” Finish” will ensure
a smooth and hassle free installation. We oer telephone support M-F
9:00 AM – 5:00PM PDT at 1 (855) 822-1348. We are here to help.
PARTS INCLUDED:
(1) AD-84 Interface
(1) AD-84 Fiber Optic Harness
(1) Instruction
PRECAUTIONS:
- Remove the negative side of the battery to avoid any short circuits
durring the installation.
- Do not install the interface near any major components or near the
HVAC system. This may cause damage or overheating to the vehicle.
- Do not disconnect the airbag connection behind the radio panel.
PRELIMINARY:
Please read the entire mannual before installing this interface.
Vehicle must be equipped with factory DVD changer.
This interface does not activate DVD reader.
IMPORTANT:
ONLY COMPATIBLE WITH AUDI MMI
2G/3G/3G+ RADIOS. AND VOLKSWAGEN
RNS850 NAV SYSTEMS.
INSTALLING THE INTERFACE:
1. Remove the factory CD-Changer from the glove box to access to
the connectors, If no CD-Changer, remove the factory radio.
2. If used on a non CD-Chnager style of vehicle, please connect the
RED and BLACK wires as directed. (See Installation Overview)
3. Remove the ber-optic cable from the factory connector.
4. Make the T-Harness connections behind the factory radio.
(if the connectors do not match please contact tech support)
5. Test and make sure the Reverse gear triggers the interface and
also test the video in-motion while the car is rolling.
(Navigation address input should be active while rolling)
6. Make all other connections before re-installing the factory
radio.
NOTE: To deactivate the Video In-Motion, please connect the BLUE
wire to 12v.
INSTALLATION OVERVIEW
Rev. 052913

Produktspecifikationer

Varumärke: CRUX
Kategori: Inte kategoriserad
Modell: VIMAD-84

Behöver du hjälp?

Om du behöver hjälp med CRUX VIMAD-84 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad CRUX Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer