Engenius ESR-1220 Bruksanvisning

Engenius Router ESR-1220

Läs nedan 📖 manual på svenska för Engenius ESR-1220 (5 sidor) i kategorin Router. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
EnGenius Quick Start Guide ESR-1220 Wireless Broadband Router
Quick Start Guide v.1.2 ESR-1220 Wireless Broadband Router 1
Please refer to the User’s Manual in the CD-ROM for complete instructions.
he ESR-1220 Wireless Broadband Router operates seamlessly in
the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz,
11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbpswireless
standard. High output power and high sensitivity can extend range and
coverage to reduce the roaming between APs to get more stability
wireless connection. It also can reduce the expense of equipment in the
same environment. To protect your wireless connectivity, this device can
encrypt all wireless transmissions through 64/128-bit WEP data
encryption and also supports WPA2/WPA/802.1x for powerful security
authentication. The MAC addresses filter lets you select exactly which
stations should have access to your network.
Front Panel
Real Panel
Label Description
LAN Ports (1 – 4) Use an Ethernet cable to connect each port to a computer on your Local
Area Network (LAN).
WAN Port Use an Ethernet cable to connect this port to your WAN router.
DC Connector Use the power cable and connect the adapter to the power socket on the
wall, and the DC inlet into the DC connector.
Antenna Connector Connect the omni-directional antenna to the SMA connector.
Connection / Activity
LED This LED will light up once an Ethernet cable is connected to one of the
LAN ports.
WAN LED This LED will light up once an Ethernet cable is connected to WAN
(Internet) port.
WLAN LED This LED will light up once the RF (wireless LAN) feature is enabled
Power LED This LED will light up once the power cable is connected to the DC
connector.
T
EnGenius Quick Start Guide ESR-1220 Wireless Broadband Router
Quick Start Guide v.1.2 ESR-1220 Wireless Broadband Router 2
Please refer to the User’s Manual in the CD-ROM for complete instructions.
Hardware Installation
1. Place the unit in an appropriate place after conducting a site survey.
2. Plug one end of the Ethernet cable into the LAN port of the device and another end into your PC/Notebook.
3. Plug one end of another Ethernet cable to WAN port of the device and the other end into you cable/DSL
modem (Internet)
4. Insert the DC-inlet of the power adapter into the port labeled “DC-IN” and the other end into the power socket
on the wall.
IP Address Configuration
The default IP address of the device is 192.168.1.1 In order to log into this device, you must first configure the
TCP/IP settings of your PC/Notebook.
1. In the control panel, double click Network
Connections and then double click on the
connection of your Network Interface Card (NIC).
You will then see the following screen.
2. Select Internet Protocol (TCP/IP) and then click
on the Properties button. This will allow you to
configure the TCP/IP settings of your
PC/Notebook.
3. Select Use the following IP Address radio
button and then enter the IP address (192.168.1.21) and
subnet mask (255.255.255.0). Ensure that the IP address and subnet mask are on the same subnet as the
device.
4. Click on the OK button to close this window, and once again to close LAN properties window.
Logging In
1. To configure the device through the web-browser,
enter the IP address of the device (192.168.1.1) into
the address bar of the web-browser and press Enter.
2. After connecting to the IP address, the web-browser
will display the login page. Specify admin for both the
User Name and Password and then click on the
Login or OK button.
3. Once you have logged in, you man configure the
WAN, LAN and Wireless settings. Please refer to the
user’s manual in the CD-ROM to configure these
parameters.
EnGenius Quick Start Guide ESR-1220 Wireless Broadband Router
Quick Start Guide v.1.2 ESR-1220 Wireless Broadband Router 3
Please refer to the User’s Manual in the CD-ROM for complete instructions.
Administrator Settings
1. Before you commission the device it
is necessary to change the default
user name and password. Click on
the Password link under the
Management navigation menu.
2. Specify a new user name.
3. Specify a new password and then re-
type the password in the next field for
confirmation.
4. Click on the Apply Changes to save the new user name and password. Use the new settings to log into the
device in the future.
LAN Settings
1. Click on the LAN Interface link on the
navigation drop-down menu. This feature
allows you to configure the LAN interface
using a static IP address or as a DHCP
server/client. This IP address is also used
to access the web-based interface.
2. IP Address: Enter an IP address for this
device.
3. Subnet Mask: Enter the subnet mask for
this IP address.
4. Default Gateway: Enter the IP address of
the default gateway.
5. DHCP-Static IP: If you use a Static IP
address, select Disabled from the drop-
down list.
6. DHCP Client: If you select DHCP Client,
you are not required to enter the rest of
the fields, as the IP address will be
provided to the device by the AP or DHCP
server
7. DHCP Server: If you select DHCP Server from the drop-down list. This device will act as a DHCP server and
assign IP address to it clients.
8. Click on the Apply Changes to save the changes.
Note: If you change the IP address here, you may need to adjust your PC’s network settings to access the
network again. The computers (and other devices) connected to your LAN also need to have their TCP/IP
configuration set to DHCP or Obtain an IP address automatically. Please refer to the user’s manual in the CD-
ROM to configure the advanced settings.

Produktspecifikationer

Varumärke: Engenius
Kategori: Router
Modell: ESR-1220

Behöver du hjälp?

Om du behöver hjälp med Engenius ESR-1220 ställ en fråga nedan och andra användare kommer att svara dig




Router Engenius Manualer

Router Manualer

Nyaste Router Manualer