Extron MLM 226 L Bruksanvisning

Extron Eluttag MLM 226 L

Läs nedan 📖 manual på svenska för Extron MLM 226 L (8 sidor) i kategorin Eluttag. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
1MLM 226 Faceplates • Installation Guide
MLM 226 Faceplates Installation Guide
MLM 226 Faceplates
This guide provides instructions for installing the following Extron MediaLink
Mounting Options faceplates, which are designed for use with the MLC 226 IP
MediaLink Controller.
The MLM 226 L, MLM 226 3GWP, or MLM 226 5GWP faceplate is shipped
with the MLC 226 IP controller, depending on the controller configuration that is
ordered. The rest of the mounting options described below may be ordered
separately as replacements, or for use with an MLC 226 IP that is ordered without
a faceplate.
MLM 226 LA low-profile, 3.15" H x 6.50" W (8.0 cm H x 16.5 cm W) lectern/
furniture-mounting faceplate. This faceplate is required when you are mounting
an MLC 226 IP using an optional UCM RAAP or UCM 10X8P mounting kit.
Part numbers: 70-342-02 (black), 70-342-03 (white), 70-342-05 (RAL9010 white)
MLM 226 LAAP — A low-profile, 3.15" H x 10.00" W (8.0 cm H x 25.40 cm W)
lectern/furniture-mounting faceplate with an opening that accommodates four
single-space AAPs
Part numbers: 70-343-02 (black), 70-343-03 (white), 70-343-05 (RAL9010 white)
MLM 226 3GWP — A three-gang (4.50" H x 6.40" W [11.43 cm H x 16.26 cm W])
faceplate that can be mounted to a mud ring (mounting bracket), an Extron
Surface Mount Box, an Extron External Wall Box, or a standard electrical box
Part numbers: 70-376-02 (black), 70-376-03 (white), 70-376-05 (RAL9010 white)
68-919-01, Rev. D
08 07
MLM 226 Faceplates Installation Guide, cont’d
MLM 226 Faceplates • Installation Guide2
MLM 226 5GWPA five-gang (4.50" H x 10.04" W [11.43 cm H x 25.50 cm
W]) faceplate with an opening that accommodates four single-space AAPs. It
can be mounted to a mud ring, an Extron Surface Mount Box, an Extron
External Wall Box, or a standard electrical box.
Part numbers: 70-377-02 (black), 70-377-03 (white), 70-377-05 (RAL9010
white)
MLM 226 7GWP A seven-gang (4.50" H x 13.665" W [11.43 cm H x
34.71 cm W]) faceplate with two openings that accommodate four single-
space AAPs each (eight AAPs total). It can be mounted to a mud ring, an
Extron Surface Mount Box, an Extron External Wall Box, or a standard
electrical box.
Part numbers: 70-340-02 (black), 70-340-03 (white), 70-340-05 (RAL9010
white)
Replacing an MLC 226 IP Faceplate with an MLM
Faceplate
1. If your MLC controller is already installed in a wall or furniture, remove the
four screws that attach it to its mounting surface (marked a in the diagram
on the next page), and lift it out.
2. After the MLC has been removed from the wall or furniture, use a small
Phillips screwdriver to remove the four faceplate attachment screws (
b in the
diagram on the next page), and save them for later use.
CAUTION
Do not remove the four faceplate screws while the MLC is installed in a
wall or furniture, or the controller may fall down into the wall or
furniture.
3MLM 226 Faceplates • Installation Guide
Extron
MLC 226 IP
DISPLAY
1 2 3
4 5 6
VOLUME
CONFIG IR
ON OFF PIC
MUTE
VCR DVD
PC
AUTO
IMAGE
LAPTOP
DOC
CAM
11
11
2
22
2
3. Lift the faceplate off the MLC 226 IP, as shown below.
OFF
ON
PC
VCRDV
D
DOC
CAM
PIC
M
UTE
A
UTO
IM A
G
E
LA
PT
OP
Extron
DISPLAY
1 2 3
4 5 6
VOL UME
C
ONFIG
IR
MLC
226 IP
4. Align the openings in the new MLM faceplate with the controllers buttons,
knob, and LEDs, then place the new faceplate on the MLC 226 IP.
5. Replace the four screws removed in step 2, and hand tighten them.
6. Install the MLC 226 IP controller with the MLM 226 faceplate in a wall or
furniture as appropriate.

Produktspecifikationer

Varumärke: Extron
Kategori: Eluttag
Modell: MLM 226 L

Behöver du hjälp?

Om du behöver hjälp med Extron MLM 226 L ställ en fråga nedan och andra användare kommer att svara dig




Eluttag Extron Manualer

Eluttag Manualer

Nyaste Eluttag Manualer