Fender KXR 200 Bruksanvisning

Fender Tangentbord KXR 200

Läs nedan 📖 manual på svenska för Fender KXR 200 (7 sidor) i kategorin Tangentbord. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/7

T H E S O U N T H A T C R E A T E S L E G E N D SD

P/N 048502

Two hundred

Owner,s Manual

KEYBOARD

EXTENDED

RANGE

Your new Fender®KXR 200 keyboard ampliﬁer is the result

of Fender's®ongoing dialog with many of today's top musi-

cians. The KXR 200 uses state of the art technology to

deliver clear, resonant and most importantly...musical

sound.

The KXR 200 is actually much more than a keyboard amp.

With its heavy-duty Fender®Special Design speaker and

dual piezo-electric horn, it could actually be classiﬁed as a

self-contained, portable P.A. system. The KXR 200 is suit-

able for almost any musical instrument requiring full-range

reinforcement, for example, electronic keyboards,

acoustic/electric guitar, electric violin and also vocals.

Compact packaging and high output power make the KXR

200 the perfect full-range instrument ampliﬁer for

rehearsal, studio or performances.

The preamp section of the KXR 200 features four indepen-

dent channels. Channels one, two, and three each feature

a single 1/4 inch, high-impedance-input jack, a three-

band equalizer, a channel volume control, an eﬀects send

control and a reverb send control. Emphasizing on vocal,

channel four is equipped with a low impedance XLR jack in

addition to the 1/4 inch jack. Furthermore, channel four

also features a four-band equalizer centered around the

vocal frequencies, while still covering the whole audible

audio spectrum. Channel four is also equipped with a

channel volume control, an eﬀects send control and a

reverb send control. In addition to the features mentioned

above, each channel also possesses an independent eﬀects

loop insertion point on the rear panel. This feature makes

the KXR 200 even more versatile.

The KXR 200 is also equipped with a master section which

contains a master volume control, an eﬀect return control, a

reverb return control, an eﬀects send jack, an eﬀects return

jack, and a line-out portion comprising of a 1/4 inch and

XLR jacks.

The KXR 200 keyboard ampliﬁer was designed to give

years of reliable service under all conditions and is

equipped with a unique implementation of our exclusive,

defeatable DELTACOMPTM compressor system. When

DELTACOMPTM is engaged, it is practically impossible to

cause the power ampliﬁer to clip (distort). With DELTA-

COMPTM, apparent compressor release time is kept short,

yet waveform distortion is kept to a minimum at low fre-

quencies.

The selection of a Fender®ampliﬁer will reward you with

years of quality music in a wide range of sonic possibilities.

This manual is designed to familiarize you with the features

and functions of your KXR 200 ampliﬁer. Read this manu-

al carefully so you will beneﬁt from these features as soon

as you start using your new Fender®ampliﬁer.

The built-in quality of a Fender®ampliﬁer is the result of

over four decades of dedication in the combined skills of

the Fender®design team. That’s why we proudly say,

FENDER®... The Sound That Creates Legends.

INTRODUCTION

CHANNEL 1 INPUT (1/4 INCH) - Plug-in connector for

instruments. This balanced input can handle as much

as 8V R.M.S.

CHANNEL 1 VOLUME CONTROL - This control adjusts

the preampliﬁer gain of channel 1. It works in con-

junction with the Master Volume control ( item I) to set

the overall loudness of the ampliﬁer for channel 1

only. Being a true “gain” control, it allows for the use

of a variety of microphones, keyboards or other instru-

ments with diﬀering output signal levels. Low-level

instruments generally require a higher Channel

Volume setting while “hotter” keyboards will require a

lower setting.

CHANNEL 1 EQUALIZER - This equalizer allows

adjustments of the tonal characteristics of channel 1

before ampliﬁcation. Each control provides a 12dB

boost or cut to bands of frequencies centered about

130, 540, and 4200 Hz. Note that all equalizer sec-

tions of the KXR 200 are designed so that if all center

frequencies are set at +12dB, a ﬂat overall response

would be obtained. This is very useful if the signal

source is weak.

CHANNEL 1 EFFECTS SEND CONTROL - This control

works in conjunction with the eﬀects send jack (item R),

eﬀects return jack (item S), and the eﬀect return con-

trol (item J) to , respectively, allow a desired amount of

preamp signal to be massaged, and to control the

amount of return signal that has gone through an

external eﬀects device. The eﬀects send control in con-

junction with the eﬀects send jack could be used to

drive another KXR 200 as a slave amp. This is done

by connecting the eﬀects send jack, with a standard

guitar cord, to the eﬀects return jack of another KXR

200. Note that each channel could be set to send a

diﬀerent amount of signal to the eﬀects bus.

CHANNEL 1 REVERB SEND CONTROL - This control

works in conjunction with the reverb return control

(item K) to allow the amount of reverb to be mixed

with the dry signal. The amount of reverb-sent signal

is independent for each channel.

CHANNEL 2 AND 3 - These two channels are provid-

ed for two additional instruments. All the controls and

jacks operate in the same manner as those in channel

1. When not in use, it is best to turn the channel vol-

ume, the eﬀects send and the reverb send controls all

the way down to avoid any ampliﬁcation of unwanted

noise. Likewise, when not in use, the equalizer sec-

tions should be kept ﬂat ( i.e. all knobs should be set at

12 O’clock).

CHANNEL 4 - This channel operates in the same man-

ner as the other three channels, but with the addition

of a few extra features: The XLR jack and an extra

band in the equalizer section. With the vocalist in

mind, the balanced, low impedance XLR jack provides

a suitable connection for a microphone. Furthermore,

the four-band equalizer was designed around the

F,G.

CHANNEL 3

VOLUME

0 10

HIGHMIDLOW

-12 +12

REVERBEFFECTS

0 10

SEND VOLUME

0 10

LOW

-12 +

CHANNEL 1

VOLUME

0 10

HIGHMIDLOW

-12 +12

REVERBEFFECTS

0 10

SEND

CHANNEL

VOLUME

0 10

MIDLOW

-12 + 12

INPUT

INPUT MIC

AB C D EF

KXR 200 FRONT PANEL FUNCTIONS

Produktspecifikationer

Varumärke:	Fender
Kategori:	Tangentbord
Modell:	KXR 200
Färg på produkten:	Zwart
Förpackningens vikt:	290 g
Användarmanual:	Ja
Maximal viktkapacitet:	2 kg
Panelmonteringsgränssnitt:	100 x 100 mm
Antal per paket:	1 stuk(s)
Inklusive skruvar:	Ja
Förbättrad kabelhantering:	Ja
Typ produkt:	Mand
Maximal skärmstorlek:	27 "