Fluke 319 Bruksanvisning

Läs nedan 📖 manual på svenska för Fluke 319 (18 sidor) i kategorin Mätutrustning. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/18
317/319
Clamp Meter
Instructions
Introduction
The Fluke 317 and 319 are hand-held, battery-operated clamp
meters (the Product) that measure:
The Product ships with:
test leads
soft case
three AAA batteries (installed)
ac and dc current
ac and dc voltage
resistance
continuity
frequency
PN 5325474 (English)
3/2022
©2022 Fluke Corporation. All rights reserved. Specifications are subject
to change without notice. All Product names are trademarks of their
respective companies.
2
Contact Fluke
Fluke Corporation operates worldwide. For local contact
information, go to our website: www.fluke.com.
To register your product, or to view, print, or download the latest
manual or manual supplement, go to our website.
+1-425-446-5500 fluke-info@fluke.com
Safety Information
A Warning identifies hazardous conditions and procedures that are
dangerous to the user. A Caution identifies conditions and
procedures that can cause damage to the Product or the equipment
under test.
 Warning
To prevent possible electrical shock, fire, or personal
injury:
Read all safety information before you use the Product.
Carefully read all instructions.
Do not alter the Product and use only as specified, or the
protection supplied by the Product can be compromised.
Do not use the Product if it operates incorrectly.
Do not use the Product if it is altered or damaged.
Use the Product only as specified, or the protection
supplied by the Product can be compromised.
Fluke Corporation
P.O. Box 9090
Everett WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
3
Limit operation to the specified measurement category,
voltage, or amperage ratings.
Do not touch voltages >30 V ac rms, 42 V ac peak, or
60 V dc.
Do not exceed the Measurement Category (CAT) rating of
the lowest rated individual component of a Product,
probe, or accessory.
Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
Use only correct measurement category (CAT), voltage,
and amperage rated probes, test leads, and adapters for
the measurement.
Do not use the HOLD function to measure unknown
potentials. When HOLD is turned on, the display does not
change when a different potential is measured.
Do not work alone.
Do not apply more than the rated voltage, between the
terminals or between each terminal and earth ground.
Comply with local and national safety codes. Use personal
protective equipment (approved rubber gloves, face
protection, and flame-resistant clothes) to prevent shock
and arc blast injury where hazardous live conductors are
exposed.
Replace the batteries when the low battery indicator
shows to prevent incorrect measurements.
Keep fingers behind the finger guards on the probes.

Produktspecifikationer

Varumärke: Fluke
Kategori: Mätutrustning
Modell: 319
Färg på produkten: Black, Green
Nuvarande: 1 A
Inspänning: 24 V
Värdgränssnitt: 9-pin
Typ av anslutning: RS-232
Typ produkt: Relaiskaart

Behöver du hjälp?

Om du behöver hjälp med Fluke 319 ställ en fråga nedan och andra användare kommer att svara dig




Mätutrustning Fluke Manualer

Mätutrustning Manualer

Nyaste Mätutrustning Manualer