Flyzone DHC-2 Beaver Bruksanvisning

Flyzone Radiostyrda leksaker DHC-2 Beaver

Läs nedan 📖 manual på svenska för Flyzone DHC-2 Beaver (16 sidor) i kategorin Radiostyrda leksaker. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/16

Length: 38.5 in

[980mm]

Radio: 5-channel

radio system

Motor: 40mm dia.

850kV outrunner,

40A ESC,

12x6 propeller

SPECIFICATIONS

Wingspan: 59.5 in

[1510mm]

Wing

Area:

430 in2

[27.7 dm2]

Weight: 3– 3.25 lb

[1360–1470 g]

Wing

Loading:

16–17 oz/ft2

[49– 52 g/dm2]

READ THROUGH THIS MANUAL BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT

INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.

WARRANTY

Flyzone guarantees this kit to be free from defects in both

material and workmanship at the date of purchase. This warranty

does not cover any component parts damaged by use or

modification. In no case shall Flyzone’s liability exceed the

original cost of the purchased kit. Further, Flyzone reserves

the right to change or modify this warranty without notice.

In that Flyzone has no control over the final assembly or material

used for final assembly, no liability shall be assumed nor

accepted for any damage resulting from the use by the user of

the final user-assembled product. By the act of using the

user-assembled product, the user accepts all resulting liability.

If the buyer is not prepared to accept the liability associated

with the use of this product, the buyer is advised to return

this kit immediately in new and unused condition to the

place of purchase.

To make a warranty claim send the defective part or item to

Hobby Services at the address below:

Hobby Services

3002 N. Apollo Dr. Suite 1

Champaign IL 61822 USA

Include a letter stating your name, return shipping address, as

much contact information as possible (daytime telephone

number, fax number, e-mail address), a detailed description of

the problem and a photocopy of the purchase receipt. Upon

receipt of the package the problem will be evaluated as quickly

as possible.

INSTRUCTION

MANUAL

™

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Academy of Model Aeronautics . . . . . . . . . . . . . . . . . . 2

SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 2

REQUIRED FOR COMPLETION . . . . . . . . . . . . . . . . . . . . 3

Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

LiPo Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

KIT INSPECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . 3

CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Mount the Landing Gear . . . . . . . . . . . . . . . . . . . . . . . 5

Mount the Floats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Mount the Horizontal and Vertical Stabilizer . . . . . . . . 6

Install the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Hook Up the Rudder and Elevator . . . . . . . . . . . . . . . . 8

Mount the Wings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Hook Up the Flaps and Ailerons . . . . . . . . . . . . . . . . 11

FINAL FLIGHT PREPARATION . . . . . . . . . . . . . . . . . . . 12

Check the Control Throws . . . . . . . . . . . . . . . . . . . . . 12

Check the C.G.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

MOTOR SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . 14

MOTOR / ESC OPERATION . . . . . . . . . . . . . . . . . . . . . . 15

FLYING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

REPAIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

TABLE OF CONTENTS

INTRODUCTION

Thank you for purchasing the Flyzone 1/10

-scale de Havilland

DHC-2 Beaver RTF/Tx-R. For anybody who enjoys ﬂ ying ﬂ oat

planes or who aspires to do so for the ﬁ rst time, the Flyzone

Beaver is the perfect choice because it maneuvers and ﬂ ies

off the water so well—you virtually can’t mess up a takeoff or

landing unless you try! Of course, the Beaver is almost just

as much at home on dry land as it is in the water. And with

the ﬂ aps extended you can set your Beaver down on water

or on land as light as a feather.

For the latest technical updates or manual corrections to the

Beaver, visit the Flyzone site at www.ﬂ yzoneplanes.com. Open

the “Airplanes” link, then select the Beaver ARF. If there is

new technical information or changes to this model a “tech

notice” box will appear in the upper left corner of the page.

Academy of Model Aeronautics

If you are not already a member of the AMA, please join! The

AMA is the governing body of model aviation and membership

provides liability insurance coverage, protects modelers’ rights

and interests and is required to ﬂ y at most R/C sites.

Academy of Model Aeronautics

5151 East Memorial Drive

Muncie, IN 47302-9252

Tele. (800) 435-9262

Fax (765) 741-0057

Or via the Internet at: http://www.modelaircraft.org

IMPORTANT!!! Two of the most important things you can

do to preserve the radio controlled aircraft hobby are to avoid

ﬂ ying near full-scale aircraft and avoid ﬂ ying near or over

groups of people.

SAFETY PRECAUTIONS

PROTECT YOUR MODEL, YOURSELF AND OTHERS...

FOLLOW THESE IMPORTANT SAFETY PRECAUTIONS

1. Your de Havilland Beaver should not be considered a toy, but

rather a sophisticated, working model that functions very much

like a full-size airplane. Because of its performance capabilities,

the Beaver, if not assembled and operated correctly, could

possibly cause injury to yourself or spectators and damage

to property.

2. You must assemble the Beaver according to the instructions.

Do not alter or modify the model, as doing so may result in an

unsafe or unﬂ yable model. In a few cases the instructions may

differ slightly from the photos. In those instances the written

instructions should be considered as correct.

3. You must use an R/C radio system that is in good condition.

All components must be correctly installed so that the model

operates correctly on the ground and in the air. You must

check the operation of the model and all components before

every ﬂ ight.

4. If you are not an experienced pilot or have not ﬂ own this type

of model before, we recommend that you get the assistance

of an experienced pilot in your R/C club for your ﬁ rst ﬂ ights.

If you’re not a member of a club, your local hobby shop has

information about clubs in your area whose membership

includes experienced pilots.

5. While this kit has been ﬂ ight tested to exceed normal

use, if the plane will be used for extremely high stress ﬂ ying,

such as racing, or if a motor or battery larger than ones in

the recommended range is used, the modeler is responsible

for taking steps to reinforce the high stress points and/or

substituting hardware more suitable for the increased stress.

We, as the kit manufacturer, provide you with a top quality,

thoroughly tested kit and instructions, but ultimately the

quality and ﬂ yability of your ﬁ nished model depends on how

you build it; therefore, we cannot in any way guarantee the

performance of your completed model, and no representations

are expressed or implied as to the performance or safety of

your completed model.

Remember: Take your time and follow the instructions to

end up with a well-built model.

REQUIRED FOR COMPLETION

Other than a #1 and #2 Phillips screwdriver and a few drops

of non-permanent threadlocker (GPMR6060), no adhesives

or anything extraordinary is required to assemble the Beaver.

The RTF is fully equipped with a complete radio control

system, LiPo battery and charger, so no other accessories

are required, but the following items are required to complete

the Tx-R edition:

Transmitter

The Tx-R includes the Tactic™ TR624 6-Channel 2.4GHz

receiver, so you’ll need either a Tactic TX600 6-channel 2.4GHz

transmitter, or any other 5-channel (or more) transmitter

compatible with the Tactic AnyLink™ 2.4GHz radio adapter*.

Using the AnyLink allows any compatible transmitter to work

with the Tactic receiver.

❍ TX600 6-channel transmitter (TACJ2600)

❍ AnyLink radio adapter* (TACJ2000)

*In addition to the AnyLink radio adapter, some AnyLink-

compatible transmitters may also require additional adapter

cables. Visit Tx-Ready.com to see the compatibility AnyLink

chart or contact Product Support at the contact information

on this page.

LiPo Battery

The RTF edition of the Beaver includes a Flyzone 3S (11.1V)

1800mAh 20C LiPo battery and the same is recommended for

the Tx-R, but a 2100mAh battery is also an option for slightly

longer ﬂ ight times (more about ﬂ ying time on page 15).

❍ Flyzone 3S (11.1V) 1800mAh 20C LiPo battery

(HCAA6430)

❍ Flyzone 3S (11.1V) 2100mAh 20C LiPo battery

(HCAA6387)

Spare batteries may also be purchased and charged at home

ahead of time, eliminating the wait between ﬂ ights for batteries

to charge at the ﬁ eld.

NOTE: The Flyzone batteries suggested are equipped with

a SuperTigre

battery connector that ﬁ t the connector on

the ESC. If using a different LiPo battery that has a Deans®

connector, a SuperTigre-to-Deans adapter (SUPM0040) will

be required, or the battery connector on the ESC may be

replaced with a Deans Ultra Plug® male connector which will

require soldering (but is a simple task for those so equipped).

Charger

The RTF comes equipped with a Great Planes 3S LiPo

balancing Smart Charger, but the Tx-R requires a charger to

be purchased separately. The Smart Charger is a safe way to

charge your LiPo battery, but it’s very basic and just enough

to get you started. The Smart Charger charges at a rate of .8

Amps, so it will take at least one-and-a-half hours or more to

charge your battery. For those who have the RTF and wish

to upgrade their charger, or those with the Tx-R who must

purchase a charger anyway, the Duratrax® Onyx™ 235 AC/

DC Advanced Peak Charger (DTXP4235) is recommended.

The Onyx is perfect for 3S batteries used with the Beaver

and may be powered either by an external DC power source

(such as a 12V battery), or a 110V AC outlet. The Onyx also

has an adjustable charge rate to charge your batteries in as

little as a half-hour or less (depending on the condition of your

batteries and the manufacturer’s speciﬁ ed charge rate). The

Onyx can also charge larger batteries and batteries other than

LiPos, so it is a versatile charger you can grow into. Finally, the

235 features an LCD digital display screen, so you can see

how much capacity it took to recharge the battery (required

for monitoring the condition of your batteries and calculating

how long you can ﬂ y).

NOTE: For use with the Onyx 235, LiPo batteries that come

with a SuperTigre connector (such as the Flyzone batteries

recommended) require a banana plugs-to-SuperTiger charge

lead (SUPM0070). And batteries that come with a Deans Ultra

Plug connector require a Charge Lead with banana plugs/

Deans Ultra Plug Male charge lead (GPMM3148).

KIT INSPECTION

Before assembly, take an inventory of this kit to make sure

it is complete, and inspect the parts to make sure they are

of acceptable quality. If any parts are missing or are not of

acceptable quality, or if you need assistance with assembly,

contact Product Support. When reporting defective or missing

parts, use the part names exactly as they are written in the

Contents list.

Flyzone Product Support Ph: (217) 398-8970 ext. 5

3002 N Apollo Drive Suite 1 Fax: (217) 398-7721

Champaign, IL 61822

E-mail: airsupport@ﬂ yzoneplanes.com

ORDERING REPLACEMENT PARTS

Replacement parts for the Flyzone de Havilland Beaver RTF/

Tx-R are available using the order numbers in the Replacement

Parts List that follows. The fastest, most economical service

can be provided by your hobby dealer or mail-order company.

To locate a hobby dealer, visit the Flyzone web site at www.

ﬂ yzoneplanes.com. Click on the Storefront icon at the top

of the page to load the Flyzone Dealer Locator. Follow the

instructions provided on the page to locate a U.S., Canadian or

International dealer.

Produktspecifikationer

Varumärke:	Flyzone
Kategori:	Radiostyrda leksaker
Modell:	DHC-2 Beaver

Behöver du hjälp?

Om du behöver hjälp med Flyzone DHC-2 Beaver ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Radiostyrda leksaker Flyzone Manualer

Flyzone Calypso Bruksanvisning

18 September 2024

Flyzone A6M2 Zero Bruksanvisning

18 September 2024

Flyzone B-25 Mitchell Bruksanvisning

17 September 2024

Flyzone Cessna 182 Skylane Bruksanvisning

17 September 2024

Flyzone Seawind Bruksanvisning

17 September 2024

Flyzone Sensei FS Bruksanvisning

17 September 2024

Flyzone Extra 300 SX Bruksanvisning

17 September 2024

Flyzone DHC-2 Beaver Bruksanvisning

17 September 2024

Flyzone Super Cub Bruksanvisning

17 September 2024

Radiostyrda leksaker Manualer

Nyaste Radiostyrda leksaker Manualer

Revell Funtic Bruksanvisning

27 Oktober 2024

FMS F4U Corsair Bruksanvisning

27 Oktober 2024

HPI Racing Bullet MT 3.0 Bruksanvisning

27 Oktober 2024

FMS 1:10 FCX10 Chevrolet K5 Blazer Bruksanvisning

26 Oktober 2024

Futaba SBS-01RO Bruksanvisning

19 Oktober 2024

Spektrum AR6600T Bruksanvisning

15 Oktober 2024

Little Tikes Tire Twister Bruksanvisning

8 Oktober 2024

Futaba 12Z Bruksanvisning

4 Oktober 2024

Graupner 33718.XT60 Bruksanvisning

3 Oktober 2024

Proline Trencher Bruksanvisning

3 Oktober 2024