Gamber-Johnson 7160-1883-00 Bruksanvisning

Läs nedan 📖 manual på svenska för Gamber-Johnson 7160-1883-00 (3 sidor) i kategorin Vagga/dockningsstation. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/3
7160-1883
DELL 7030 TABLET CRADLE
Rev A
INST-1142
Printing Spec:
PS-001
© Copyright 2023 Gamber-Johnson, LLC
This instruction sheet is for the following products:
Item No. 7160-1883-00
No Electronics
1 / 3
This instruction sheet is for the Dell 7030 Tablet Cradle. For instructions on features, set-up,
and operation of the Dell 7030 Tablet, please refer to the manual provided by Dell with the
Tablet.
This Cradle is designed to be used with a variety of Gamber-Johnson mounting systems.
Installation instructions for other Gamber-Johnson products are provided with each individual
product.
A Dell certified power adapter
must
be used to power the Dell Tablet, the below power
adapter is sold separately unless ordered through a KIT.
(See Page 4 For Isolated Power Adapter Options)
7300-0621
- 11-16VDC Input - 100W USB-C Output - Available with the Cradle as a KIT:
7170-1055-00
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Form
Revision
Product
INSTALLATION INSTRUCTIONS
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Stylus Holder
Release Latch
Guide
Pins
Hand Strap & Magnetic Mount
Clearance
Lock
Serial Label
Contains:
Product Information,
MFG Date, Serial Number, Ect.
Warranty Label
Mounting Studs
1/4-20 x 0.90"
Mounting HW Provided
Recommended Torque = 15in/lbs
DELL 7030 TABLET CRADLE FEATURE
IDENTIFICATON
2 / 3
DOCKING AND UNDOCKING THE TABLET
TO DOCK THE COMPUTER
Insert the bottom of the tablet into the
1.
cradle.
Rotate the top of the tablet under the
2.
top latch until the tablet is resting
inside the main housing. The latch will
spring down in front of the tablet to
hold it in place.
(See figures 1 & 2)
(Optional) Turn lock 90 degrees
3.
clockwise to lock the tablet in the dock.
TO UNDOCK THE COMPUTER
Unlock the dock if locked (turn lock
1.
90 degrees counter-clockwise)
Push inward on the latch and pull
2.
outward on the top of the tablet until it
clears the top latch. Make sure
handle clears the lock housing.
(See Figures 3 & 4)
Lift the Tablet up and out of the
3.
cradle.
Figure 1
Figure 2
Figure 3
Figure 4
3 / 3
Locked
Position
Unlocked
Position

Produktspecifikationer

Varumärke: Gamber-Johnson
Kategori: Vagga/dockningsstation
Modell: 7160-1883-00

Behöver du hjälp?

Om du behöver hjälp med Gamber-Johnson 7160-1883-00 ställ en fråga nedan och andra användare kommer att svara dig




Vagga/dockningsstation Gamber-Johnson Manualer

Vagga/dockningsstation Manualer

Nyaste Vagga/dockningsstation Manualer