Gamber-Johnson 7160-1982 Bruksanvisning

Läs nedan 📖 manual på svenska för Gamber-Johnson 7160-1982 (7 sidor) i kategorin Vagga/dockningsstation. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
7160-1982
Dell Rugged Laptop Docking Station
Rev B
INST-1178
Printing Spec:
PS-001
© Copyright 2024 Gamber-Johnson, LLC
1 / 7
Gamber Johnson recommends the following power adapter to power the
docking station. They can be ordered from Gamber-Johnson seperatley.
7300-0714 - Bare Wire (11-16 Vdc Input, 120w Output) - Available with the
docking station as KIT
7170-1090-XX
This instruction sheet is for the following products:
Item No. 7160-1982-00
Dock - Dell Rugged Laptop, Non-RF, Non-HDMI
Item No. 7160-1982-03
Dock - Dell Rugged Laptop, Tri-RF, Non-HDMI
Item No. 7160-1982-10
Dock - Dell Rugged Laptop, Non-RF, With-HDMI
Item No. 7160-1982-13
Dock - Dell Rugged Laptop, Tri-RF, With-HDMI
This instruction sheet is for the Dell Rugged Laptop docking station only. For instructions
on features, set-up, and operation of the Dell Rugged computer, please refer to the
manual provided by Dell with the computer.
This docking station works with
Dell 12" Latitude Rugged Extreme 2-in-1 Laptop
1.
Dell 14" Rugged Laptop
2.
Dell 14" Rugged Extreme Laptop
3.
Dell 14" Rugged Extreme Business Laptop
4.
See page 4 for adjustment instructions.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Form
Revision
Product
INSTALLATION INSTRUCTIONS
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
During Installation:
DO NOT
connect this docking station to the vehicle battery until:
All other electrical connections are made
1.
Mounting of all components is complete
2.
Verification that no shorts exist in the entire system
3.
DO NOT
install equipment or route wiring or cords in the deployment path of any air bag.
When drilling into the vehicle, DO make sure that both sides of the surface are clear of anything that
could be damaged.
CAUTION:
If wiring is shorted to the frame, high current conductors can cause hazardous sparks
resulting in electrical fires or flying molten metal.
After installation:
Test the docking station to ensure that it is working properly.
File these instructions in a safe place and refer to them when performing maintenance or re-
installing.
WARNING
: Failure to follow all safety precautions and instructions may result in property damage,
serious injury, or death.
Safety is dependent on the proper installation and servicing of this docking station. It is important to
read and follow all instructions before installing this product.
To properly install a Gamber-Johnson docking station you must have a good understanding of
automotive electrical procedures and systems, along with proficiency in the installation and service of
aftermarket vehicle equipment.
There are no adjustments required at any time of the electrical components within the docking station.
Opening the docking station will void the product warranty.
IMPORTANT SAFETY INFORMATION FOR INSTALLERS
Conduct a "Bench Test"
Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and
software issues are resolved prior to installation:
Make sure the computer is operational by itself.
1.
Insert computer into the docking station and verify that the computer is
2.
operating in the dock.
Interconnect entire assembly and verify start-up of all components, including
3.
other equipment (printers, modems, scanners, etc.)
Gamber-Johnson recommends positioning of all mounts and equipment in the vehicle
prior to the actual install to verify that mounting locations are safe and practical.
PRE-INSTALLATION RECOMMENDATIONS
2 / 7
DELL LAPTOP DOCKING STATION FEATURE IDENTIFICATION
Docking
Connector
Rear Hook
TRI-RF Connector
(Optional)
Adjustable Front
Hooks
Lockable Latch
Front Hook
Adjustment Button
IF USING FULL PCB SKU WITH HDMI: VISIT
WWW.GAMBERJOHNSON.COM
TO
DOWNLOAD THE REQUIRED DOCKING STATION DRIVERS FOR YOUR DEVICE
WWW.GAMBERJOHNSON.COM > SUPPORT > DOCKING DRIVERS
HDMI
(Optional)
Serial
USB-C
(3.0)
USB-A
(2.0)
2x USB-A
(3.0)
Ethernet
Power Input
(19v, 6a max)
TRI-RF
(WWAN, GPS,WLAN)
(Optional)
VESA 75mm Hole Pattern
(1/4-20 Mounting Hardware Provided)
Recommended Torque = 25 in/lbs
Serial Label
3 / 7

Produktspecifikationer

Varumärke: Gamber-Johnson
Kategori: Vagga/dockningsstation
Modell: 7160-1982

Behöver du hjälp?

Om du behöver hjälp med Gamber-Johnson 7160-1982 ställ en fråga nedan och andra användare kommer att svara dig




Vagga/dockningsstation Gamber-Johnson Manualer

Vagga/dockningsstation Manualer

Nyaste Vagga/dockningsstation Manualer