Golden Lighting Heartwood 8063-BA3 BUS Bruksanvisning

Golden Lighting Lättnad Heartwood 8063-BA3 BUS

Läs nedan 📖 manual på svenska för Golden Lighting Heartwood 8063-BA3 BUS (2 sidor) i kategorin Lättnad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
Mounting
Strap 1ea Mounting
Screws 4ea Deco Nut 2ea
Hex nut 2ea Wire
connectors 2ea Socket
Washer 3ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad nish)
Comments
Notice: Please review the parts listing and check for all parts before assembling the xture. If any
parts are missing or damaged, please note onthis sheet and contact the place of purchase to
arrange for replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:________
_
to be lled out by retailer
PARTS & ASSEMBLY SHEET
This xture assembled PO:__________ Date: ________
Fixture Name: Heartwood 8063-BA3 BUS
FIXTURE SSEMBLY NSTRUCTIONS A I
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: INSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
1.Slide the Glass Shade (J) and Socket
Washer (K) over Socket( I ) and secure Glass
Shade (J) by threading the Socket Ring(J) to
Socket (I) until tight.
2. Install the light bulb in accordance with the
xture's specications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING!)
Fig 1
8063-BA3 BUS
Read and review installation instruction sheet,
but do not install before assembling the xture.
For Customer Service, contact the place of purchase to arrange for replacement parts.
HANGING THE FIXTURE(Fig.1)
1. Carefully remove the new xture from the carton
and the yellow bag that holes all your parts. Check that
all parts are included as shown in the illustration and
parts list.
2. Shut o power at the circuit breaker and remove the
old xture from wall, including the old mounting strap.
3. The Mounting Strap(F) contains several pairs of
threaded holes, nd the pair of holes that match the
holes spacing in your xture Back Plate(H) and thread
the two Mounting Screws(D) half way into the
Mounting Strap(F) and secure with Hex Nut (G).
4. Place the Mounting Strap(F)over the Junction Box
(A)so the Mounting Screws(D) are vertical or
horizontal, as required by xture type.
CONNECTING THE WIRES (Fig 2)
6. Attach the power supply wires to the xture lead
wires by connecting BLACK to BLACK (or SMOOTH)
and WHITE to WHITE (or RIBBED).
7. Attach the GROUND wire(GREEN or COPPER)
from the Junction Box and the xture Ground wire to
the green Ground Screw (I) on the Mounting Bracket
(F) or connect both wires together using the correct
size of wire connectors. -
NOTE:Twist the wires together in the same direction
you twist the wire connector (L) onto the wires.
8. Tuck these wire connections neatly into the Junction
Box.
FINISHING THE INSTALLATION(Fig.3)
9. After tucking these wire connections neatly into the
Junction Box and place the xture Back Plate(H) over
the two Mounting Screws(D) and secure the Back
Plate(H) against the wall by threading two Deco
Nuts(P) over the two Mounting Screws(D) until tight as
shown on Fig.1.
10. Install the light bulbs and glass shade as per the
xture assembly sheet.
YOUR INSTALLATION IS NOW COMPLETE.
RETURN POWER TO THE JUNCTION BOX AND
TEST THE FIXTURE.
Fig. 3
Fig. 1
Fig. 2
5. Attach the Mounting Strap(F) to the Junction Box
using the two mounting screws(H)and tighten securely
with screw driver.
For Wall Mount Light Fixture
INSTALLATION INSTRUCTIONS
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
Fixture Name: Heartwood 8063-BA3 BUS

Produktspecifikationer

Varumärke: Golden Lighting
Kategori: Lättnad
Modell: Heartwood 8063-BA3 BUS

Behöver du hjälp?

Om du behöver hjälp med Golden Lighting Heartwood 8063-BA3 BUS ställ en fråga nedan och andra användare kommer att svara dig




Lättnad Golden Lighting Manualer

Lättnad Manualer

Nyaste Lättnad Manualer