Golden Lighting Olympia 1648-1W BUS Bruksanvisning

Golden Lighting Lättnad Olympia 1648-1W BUS

Läs nedan 📖 manual på svenska för Golden Lighting Olympia 1648-1W BUS (2 sidor) i kategorin Lättnad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
Mounting strap Mounting screwMounting Screw
1ea 4" 2ea 8/32"X28mm 2ea 8/32X1"
Wire connnector Deco nutHex Nut (round nut)
3ea P4 Orange 2ea 8/32"X3.5mm 2ea @12mm
Green Ground
screw
1ea 8/32"X10mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
1648-1W BUS
Read and review installation instruction sheet before
assembling the fixture.
F IIXTURE ASSEMBLY NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
1. Slide the glass shade (K) and candle sleeves (L) over
the socket of fixture body (M).
2. Carefully press the clips inside of the shade (K) onto
the bulb.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
Fig. 4
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
below to be filled out by retailer
PARTS & ASSEMBLY SHEET
This xture assembled PO:__________ Date: ________
Fixture Name: Olympia 1648-1W BUS
Bulb
(Not Provided)
K
J
H
M
L
For Wall Mount Light Fixture
INSTALLATION INSTRUCTIONS
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
Fixture Name: Olympia 1648-1W BUS
For Customer Service, contact the place of purchase to arrange for replacement parts.
Fig. 3
Fig. 1
Fig. 2
HANGING THE FIXTURE (Fig. 1)
1. Carefully remove the new fixture from the carton and the
yellow bag that holes all your parts. Check that all parts are
included as shown in the illustration and parts list.
2. Shut off power at the circuit breaker and remove the old
fixture from wall, including the old mounting strap.
3. The Mounting Strap(A) contains several pairs of threaded
holes, find the pair of holes that match the holes spacing in your
fixture Back Plate (K) and thread the two Mounting Screws(B)
half way into the Mounting Strap(A).
4. Place the Mounting Strap (A) over the Junction Box (E) so
the Mounting Screws (B) are vertical or horizontal, as required
by fixture type.
5. Attach the Mounting Strap (A) to the Junction Box (E) by
using the two mounting screws(D). Tighten the screws securly.
CONNECTING THE WIRES (Fig. 2)
5. Attach the power supply wires to the fixture lead wires by
connecting BLACK to BLACK (or SMOOTH) and WHITE to
WHITE (or RIBBED).
6. Attach the GROUND wire(GREEN or COPPER) from the
Junction Box and the fixture Ground wire to the green Ground
Screw on the Mounting Bracket (A) or connect both wires
together using the correct size of wire connectors.
NOTE: Twist the wires together in the same direction you twist
the wire connector onto the wires.
7. Tuck these wire connections neatly into the Junction Box.
FINISHING THE INSTALLATION (Fig. 3)
9. Place the fixture Back Plate (J), over the Mounting
screws(B), so they protrude through the holes in the Back Plate
(J).
10. Thread the Deco Nuts (H) onto the Mounting Screws (B)
and continue turning until the Back Plate (J) is snug against the
wall.
11. Install glass as per the fixture assembly instructions
YOUR INSTALLATION IS NOW COMPLETE. RETURN
POWER TO THE JUNCTION BOX AND TEST THE FIXTURE.
BARE COPPER
(Ground)
GREEN
(Ground)
FIXTURE WIRES
SMOOTH (BLACK)
RIBBED (WHITE)
BLACK
WHITE
HOUSE WIRES
K
J
H
M
L

Produktspecifikationer

Varumärke: Golden Lighting
Kategori: Lättnad
Modell: Olympia 1648-1W BUS

Behöver du hjälp?

Om du behöver hjälp med Golden Lighting Olympia 1648-1W BUS ställ en fråga nedan och andra användare kommer att svara dig




Lättnad Golden Lighting Manualer

Lättnad Manualer

Nyaste Lättnad Manualer