Hobbywing Ezrun 1626 Bruksanvisning
Hobbywing
Radiostyrda leksaker
Ezrun 1626
Läs nedan 📖 manual på svenska för Hobbywing Ezrun 1626 (1 sidor) i kategorin Radiostyrda leksaker. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/1
Thank you for purchasing this HOBBYWING product! The
power of brushless power system is powerful. Any
improper use may cause personal injury and damage to the
product and related devices. We strongly recommend
reading through this user manual before use and strictly
abide by the specified operating procedures. We shall not
be liable for any liability arising from the use of this
product, including but not limited to reimbursement for
incidental or indirect losses. Meanwhile, we do not assume
any responsibility caused by unauthorized modification of
the product. We have the right to change the product
design, appearance, performance and use requirements
without notice.
CA UT ION S
AT T ENT IO N
P Lart sist
02 Features
04 I sn ta at on onne t onll i &Cci
05 Gear ngi
06 A emb y and D a emb yss l is ss l
03 Spe f at onci icis
01 Warn ngis
• Specially designed for 1/28 mini car when matched with Hobbywing EZRUN MINI28 esc, it has perfect compatibility, and provides ，
better performance and more delicate manipulating feel.
• The front and rear ends of the motor are designed with large openings structure to provide better heat dissipation for the motor.
• Built in high-precision Hall sensor combined with the high precision and balanced rotor to ensure excellent linearity of the motor.
• The internal PCB is a 4-layer board, and the ABC wiring position is reinforced by punching holes,prevent the soldering spot from falling
off after multiple soldering.
• Please carefully check power devices and manual of car frame to ensure the power pairing is reasonable. Avoid wrong pairing to
overload and damage the motor.
• Always wire up all the parts of the equipment carefully. If any of the connections come loose as a result of vibration, your model RC
may lose control.
• Never apply full throttle if the pinion is not installed. Due to the extremely high RPMs without load, the motor may get damaged.
• Never allow the motor case to get 100 degrees Celsius (212 degrees Fahrenheit) because the magnets maybe demagnetized by high
temperature.
In order to make the motor have longer service life and higher efficiency, we suggest to regularly check the bearing and clean the dirt in the
motor. The specific time depends on the frequency of using the motor and the site conditions. When installing, please follow the steps in the
following assembly drawing; when disassembling, follow the reverse steps.
Reasonable selection of gear ratio is very important. Improper gear ratio may bring you great loss. You can select the gear ratio according
to the following points!
1. The running temperature of the motor
The motor temperature should be lower than 100 degrees Celsius (212 degrees Fahrenheit) in operation. Because high temperature
may cause the magnets to get demagnetized, the coil to get melt and short circuited, and the ESC to get damaged. A suitable
gearing ratio can effectively prevent the motor from overheating.
2. The principle of selecting gear ratio
To avoid the possible damage to ESC and motor caused by the overheat, please start with a small pinion/a big FDR and check the
motor tempera ture regularly. If the motor and ESC temperature always stay at a low level during the running, you can change a big
pinion/a low FDR and also check the motor temperature regularly to ensure that the new FDR is suitable for your vehicle, local weather
and track condition. (Note: For the safety of electric devices, please check the ESC and motor temperature regularly.)
1. Install the motor
There are 8 motor mounting holes in M2 specification, and the mounting holes are 2.5mm in depth, before installing the motor on
the vehicle, please carefully confirm whether the specification of the screws is appropriate according to the thickness of the motor
mounting plate to avoid damage to the motor due to too long screws.
2. How to Connect the Motor to an ESC
• When connecting the motor and esc, please pay attention to the marked three-phase position of A, B and C to ensure that the three
wires of the motor and esc are connected correspond ingly. Otherwise, it cannot run normally and even damage the esc and motor.
That is: Wire A of the esc matches wire A of the motor, wire B of the esc matches wire B of the motor, wire C of the esc matches wire C
of the motor.
• Connecting the sensor cable to the motor and esc.
3. Inspection
Before power on the esc, please check the reliability of the motor installation and the correctness of all connections.
Model
EZRUN-1626SD-3500KV
EZRUN-1626SD-5000KV
EZRUN-1626SD-6500KV
3500KV
5000KV
6500KV
KV
LiPos
0.4A
0.5A
0.6A
No-load
Current
(A)
Diameter/Length
(mm)
2S ϕ=16mm (0.63in)
L=26mm (1.02in)
ShaftDiameter/
Length (mm)
ϕ=2.0mm (0.08in)
L=8.5mm (0.33in)
Bearing size
(mm)
D5*D2*T2.5
Poles
2
Weight
(g)
1/28 Mini
Applications
18g
USER MANUAL
EZRUN 1626SD
Sensored Brushless Motor
20221026
8
18.5
16
(
0.62")
8.5
±0.5
26
±0.2
(1.02")
1.80
2
（
0.78")
8-M2 EQS
12
(
0.47")
45°EQS
C.C.W
Rear End Bell x 1Pcs
Screws for Fastening
the Rear End Bell x 2Pcs
(M1.6 x 4mm)
Stator Set x 1Pcs
Rotor x 1Pcs
1. Mount the motor rotor
3. Mount screws for fastening
the rear end bell 4. Picture of the assembled motor
2. Mount the rear end bell set
1 2
3 4
(A)
(C)
(B)
Battery
Electronic Speed Controller
Receiver Motor
Sensor wire
Sensor port of motor
Produktspecifikationer
| Varumärke: | Hobbywing |
| Kategori: | Radiostyrda leksaker |
| Modell: | Ezrun 1626 |
Behöver du hjälp?
Om du behöver hjälp med Hobbywing Ezrun 1626 ställ en fråga nedan och andra användare kommer att svara dig
Radiostyrda leksaker Hobbywing Manualer
29 Mars 2025
29 Mars 2025
28 Mars 2025
28 Mars 2025
27 Mars 2025
27 Mars 2025
27 Mars 2025
27 Mars 2025
27 Mars 2025
27 Mars 2025
Radiostyrda leksaker Manualer
- Radiostyrda leksaker ACME
- Radiostyrda leksaker MJX
- Radiostyrda leksaker Absima
- Radiostyrda leksaker Spektrum
- Radiostyrda leksaker Chicco
- Radiostyrda leksaker Overmax
- Radiostyrda leksaker Carson
- Radiostyrda leksaker Parrot
- Radiostyrda leksaker Velleman
- Radiostyrda leksaker Amewi
- Radiostyrda leksaker Proline
- Radiostyrda leksaker Biltema
- Radiostyrda leksaker TacTic
- Radiostyrda leksaker DJI
- Radiostyrda leksaker Little Tikes
- Radiostyrda leksaker Revell
- Radiostyrda leksaker Futaba
- Radiostyrda leksaker Conrad
- Radiostyrda leksaker Tamiya
- Radiostyrda leksaker Traxxas
- Radiostyrda leksaker ARRMA
- Radiostyrda leksaker Carrera
- Radiostyrda leksaker Spin Master
- Radiostyrda leksaker Graupner
- Radiostyrda leksaker Blade
- Radiostyrda leksaker ParkZone
- Radiostyrda leksaker JETI
- Radiostyrda leksaker Ninco
- Radiostyrda leksaker Multiplex
- Radiostyrda leksaker SkyRC
- Radiostyrda leksaker SAB
- Radiostyrda leksaker Ripmax
- Radiostyrda leksaker Maverick
- Radiostyrda leksaker Reely
- Radiostyrda leksaker Robbe
- Radiostyrda leksaker LRP
- Radiostyrda leksaker Lenoxx
- Radiostyrda leksaker Axial
- Radiostyrda leksaker Hangar 9
- Radiostyrda leksaker FMS
- Radiostyrda leksaker E-flite
- Radiostyrda leksaker Flyzone
- Radiostyrda leksaker XciteRC
- Radiostyrda leksaker FrSky
- Radiostyrda leksaker WLtoys
- Radiostyrda leksaker Force Engine
- Radiostyrda leksaker Sharper Image
- Radiostyrda leksaker Vaterra
- Radiostyrda leksaker Jada
- Radiostyrda leksaker HPI Racing
- Radiostyrda leksaker Kyosho
- Radiostyrda leksaker PowerBox Systems
- Radiostyrda leksaker Losi
- Radiostyrda leksaker Hobby Zone
- Radiostyrda leksaker JR
- Radiostyrda leksaker RC4WD
- Radiostyrda leksaker Sky Rider
- Radiostyrda leksaker DF-Models
- Radiostyrda leksaker ROCHOBBY
Nyaste Radiostyrda leksaker Manualer
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025