Hobbywing Ezrun 3665 SD G3 Bruksanvisning

Hobbywing Radiostyrda leksaker Ezrun 3665 SD G3

Läs nedan 📖 manual på svenska för Hobbywing Ezrun 3665 SD G3 (2 sidor) i kategorin Radiostyrda leksaker. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Thank you for purchasing this HOBBYWING product! The power of

brushless power system is powerful. Any improper use may cause

personal injury and damage to the product and related devices. We

strongly recommend reading through this user manual before use

and strictly abide by the specified operating procedures. We shall

not be liable for any liability arising from the use of this product,

including but not limited to reimbursement for incidental or indirect

losses. Meanwhile, we do not assume any responsibility caused by

unauthorized modification of the product. We have the right to

change the product design, appearance, performance and use

requirements without notice.

CAU T IO NS

AT T ENT IO N

Parts List

Rear End Bell x 1Pcs

Screws for Fastening

the Rear End Bell x 3pcs

(M2x4mm)

Screws for Fastening the Front

End Bell x 6Pcs (M2x4mm)

1. Mount the motor rotor

4. Mount the rear end bell set

5. Mount screws for fastening

the rear end bell

2. Mount the front end bell set

3. Mount screws for fastening

the front end bell

6. Picture of the assembled motor

1 2 3

4 5 6

Stator Set x 1Pcs

Front End Bell x 1pcs

Rotor x 1Pcs

Switch

Motor

Electronic Speed Controller

EZRUN 3652SD-5400KV-G3

EZRUN 3652SD-4100KV-G3

EZRUN 3652SD-3300KV-G3

EZRUN 3665SD-4000KV-G3

EZRUN 3665SD-3200KV-G3

EZRUN 3665SD-2400KV-G3

5400KV

4100KV

3300KV

4000KV

3200KV

2400KV

30402606

30402605

30402603

30402608

30402607

30402604

≤6.8A

≤5.0A

≤3.9A

≤8.2A

≤7.1A

≤5.2A

227.1g

227.9g

228.3g

297.2g

304.4g

304.5g

2-3S

2-4S

ϕ=37mm (1.46in)

L=53mm (2.09in)

ϕ=37mm (1.46in)

L=65.8mm (2.59in)

ϕ=3.175mm (0.125in)

L=15mm (0.59in)

ϕ=5mm (0.2in)

L=16.5mm (0.65in)

Front: D13*D5*T4

Rear: D11*D5*T5

Front: D16*D5*T5

Rear: D11*D5*T5

1/10 On-road, Buggy,

Truck (Light load)

1/10 Truck, Monster truck

EZRUN 3652SD G3

EZRUN 3665SD G3

36.4

15 ±0.5

3.175

（

1/8"）

2.8

53 ±0.2

(2.08")

37 Dim.of cooling fins

25.4

（ 1"）

6-M3 EQS

60°EQS

C.C.W

65.8 16.5 ±0.5

4.5

36.40

25.4

60°

6-M3

37 Dim.of cooling fins

3- 4.0

C.C.W

02 Features

04 Installation & Connection

05 Gearing

06 Assembly and Disassembly

03 Specifications

01 Warnings

• Chip built in the motor,when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify

the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel.

• Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor

temperature is effectively reduced.

• The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes

the motor work stably in sensor state.

• CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel

output shaft, high-precision bearing for high durability and smoothness.

• The innovative new sensor interface and rubber cover bearing have better waterproof and dustproof effect than the traditional sensor motor.

• Please carefully check power devices and manual of car frame to ensure the power pairing is reasonable. Avoid wrong pairing to overload and damage

the motor.

• Always wire up all the parts of the equipment carefully. If any of the connections come loose as a result of vibration, your model RC may lose control.

• Never apply full throttle if the pinion is not installed. Due to the extremely high RPMs without load, the motor may get damaged.

• Never allow the motor case to get 100 degrees Celsius (212 degrees Fahrenheit) because the magnets maybe demagnetized by high temperature.

In order to make the motor have longer service life and higher efficiency, we suggest to regularly check the bearing and clean the dirt in the motor. The

specific time depends on the frequency of using the motor and the site conditions. When installing, please follow the steps in the following assembly

drawing; when disassembling, follow the reverse steps.

Reasonable selection of gear ratio is very important. Improper gear ratio may bring you great loss. You can select the gear ratio according to the following points!

The motor temperature should be lower than 100 degrees Celsius (212 degrees Fahrenheit) in operation. Because high temperature may cause the magnets to get

demagnetized, the coil to get melt and short circuited, and the ESC to get damaged. A suitable gearing ratio can effectively prevent the motor from overheating.

To avoid the possible damage to ESC and motor caused by the overheat, please start with a small pinion/a big FDR and check the motor temperature regularly.

If the motor and ESC temperature always stay at a low level during the running, you can change a big pinion/a low FDR and also check the motor temperature

regularly to ensure that the new FDR is suitable for your vehicle, local weather and track condition. (Note: For the safety of electric devices, please check the

ESC and motor temperature regularly.)

There are 6 motor mounting holes in M3 specification, and the mounting holes are 5mm in depth,