IOptron ICam 462C Bruksanvisning

IOptron Kamera ICam 462C

Läs nedan 📖 manual på svenska för IOptron ICam 462C (7 sidor) i kategorin Kamera. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
iOptron Corporation 6E Gill Street, Woburn, MA 01801 |
iOptron Planetary Camera Manual
iCAM462C
Product # 3372
Ver. 1.00 2021.12
iOptron reserves the rights to revise this instruction without notice. Actual color/contents/design/function of a product may dier
from those described in this instruction manual.
2
Product Descripon
iCAM462C camera uses Sony IMX462 color sensor. The imaging area is 1/2 9um pixel size, a .8”, with 2.
2.1MP resoluon (1944*1096) and diagonal of 6.5 mm.
iCAM462C camera has a very high sensivity. It is an idea camera for planetary imaging. The camera has
a very low readout noise. The tesng results indicated that the readout noise is as low as 0.73e at a gain
of 350 and around 0.7e at a gain of 400. The camera has a unique DPS (Dead Pixel Suppression)
technology to eliminate the any abnormal/dead pixel by analyzing camera dark frames. The camera has
a unique HCG mode, which will automacally turn on when the camera gain seng is ≥ 80. The HCG
mode can greatly reduce the readout noise and retain the same high dynamic range as it at low gain.
Due to its unique QE response, the sensivity reaches the peak at 800-850nm. An IR850 or CH4 lter can
be used with the camera for infrared imaging.
When the camera is connected to the USB3.0 interface and full-resoluon preview is used, it can reach
136 fps in RAW8 mode (10bit ADC). During image recording, the actual recording speed is affected by
the hard drive wring speed. It is recommended to use a high-quality solid state drive to record data to
realize the full benet of the USB3.0 data speed. The ST-4 guiding port allows one to connect the camera
to a mount GUIDE port for ST-4 autoguiding.
Package Contents
iCAM Camera 462C
USB 3.0 cable
ST-4 guiding cable
Online Contents
This Manual
Camera driver
ASCOM driver
System Requirement
Windows 7/8/10 is supported
Linux and Mac OS will be supported soon.
Driver Installaon
1. Download iCAM/PlayerOne camera driver. Save in a folder or desktop.
2. DO NOT connect the camera to the computer yet. Double click on downloaded driver to
enter installaon page.
3
3. Check and click License Agreement Install.
4. Check and click . Always Trust Soware from PlayerOne Install
5. Click when it is down. Install Finished
6. Now connect the camera to a computer using included USB 3.0 cable. Check iCAM status in
Device Manager Imaging devices under .

Produktspecifikationer

Varumärke: IOptron
Kategori: Kamera
Modell: ICam 462C

Behöver du hjälp?

Om du behöver hjälp med IOptron ICam 462C ställ en fråga nedan och andra användare kommer att svara dig




Kamera IOptron Manualer

Kamera Manualer

Nyaste Kamera Manualer