Kicker SX500.2 Bruksanvisning

Kicker bilradio SX500.2

Läs nedan 📖 manual på svenska för Kicker SX500.2 (20 sidor) i kategorin bilradio. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/20

SX .2 Series Amplifiers

Features

Low Impedance Operation Stable into 2 ohm stereo

or 4 ohm mono loads.

SORT Protection Circuitry (S Ohort circuit, ver-voltage,

Reverse polarity, hermal) Protects amplifier from accidentsT

and out of spec operation.

MOSFET Power Supply Provides high efficiency

operation.

PAST ( mp ignal Pre A S Transfer) Output RCA jacks to pass the

incoming signal to another amplifier or component.

SAMS (S A M Stereo nd ono imultaneously) Amplifier will

operate into a bridged mono load and a stereo load at the

same time.

Low Pass Filter Fully adjustable digital crossover with

variable slope and crossover frequency. 30 Hz - 20 kHz in 1/12

octave spacing. OFF - 36 dB per octave slope in 6 dB incre-

ments.

High Pass Filter Fully adjustable digital crossover with

variable slope and crossover frequency. 10 Hz - 16 kHz in 1/12

octave spacing. OFF - 36 dB per octave slope in 6 dB incre-

ments.

KickEQ Fully adjustable single band digital parametric equal-

izer with variable Q (bandwidth), variable center frequency and

variable boost or cut. Q range .5 - 10 in .5 steps. Center

frequency 20 Hz - 20 kHz in 1/12 octave steps. Boost or cut

range +/- 18 dB.

Adjustable Phase The output phase of each channel can

be set at 0 Degrees or 180 Degrees. Left and Right channels

can be linked or independently adjusted.

UltraMatch Gain Structure Digital input gain control

with five selectable gain ranges (1 volt, 2 volt, 4 volt, 8 volt, 16

volt) with 12 dB of adjustment in each range in .5 dB steps.

Left and Right channels can be linked or adjusted independ-

ently.

SickBay and On Board Diagnostics Various tools to

troubleshoot installation issues and check amp status.

Kompressor A 4-setting, user-selectable bass compressor

used to fatten up your sub bass. OFF, TIGHT, CONTOUR and

ATTACK with +/- 24 dB of adjustment to compensate for

speaker size or listening style.

ISIS I S I S(pronounced eye-sis) ( ndicate tatus & nput ettings)

The user interface to view or adjust current settings and check

the status of your Kicker SX amplifier.

BLAST Port (B L A S Tass evel nd ignal ransfer) Provides

Remote Bass Level Control and control signal transfer

between multiple SX amplifiers.

EndKaps Cast aluminum, custom, removable covers to pro-

tect and hide all your wiring connections to the amplifier. Can

be prepped and painted any custom color you choose.

SASA (S A Shake tick A ) t So many more features...it is more

than you can Shake A Stick At. (It’s an Oklahoma thing!) Read

on to find out!

2SX .2 Series Amplifiers

Introduction

SX400.2 / SX500.2 / SX600.2 / SX900.2

SX .2 Series

Amplifier

Owners Manual

Two Channel Models:

Attention:

Please take a moment and record the information

asked for below in the provided area. It is also a good

idea to attach the original sales receipt or a copy of it to

this page for future reference

If for any reason you require service on this ampliﬁer

during the warranty period, you will need to provide this

information and a copy of the receipt to Kicker to vali-

date your warranty.

ALWAYS KEEP YOUR RECEIPT!

Dealer Where Purchased:

Purchase Date:

Amplifier Model Number:

Amplifier Serial Number:

Congratulations!

You have just purchased the latest in amplifier

technology to carry the famous KICKER name.

Your KICKER SX series amplifier employs the lat-

est in DSP signal processing to give you total

control over your sound. Like all KICKER prod-

ucts it is designed and built to give you years

of powerful and trouble-free performance.

This installation manual contains valuable infor-

mation on how to get the most out of your

new SX series amplifier.

Thanks for buying KICKER. Enjoy!

_____________________________________________

SX .2 Series Amplifiers

Features

VFD DISPLAY - cont

GAIN - Indicates you are in the gain menu.

EQ - Indicates you are in the equalizer menu.

LPF - Indicates you are in the low pass filter menu.

HPF - Indicates you are in the high pass filter menu.

PHASE - Indicates you are in the phase menu.

KOMP - Indicates you are in the Kompressor menu.

MEM-1 - Memory preset 1 activated.

MEM-2 - Memory preset 1 activated.

MEM-3 - Memory preset 1 activated.

MEM-4 - Memory preset 1 activated.

KEYPAD

The keypad consists of nine buttons that allow you to adjust

your amplifier.

M1 - Used to select memory preset 1 or to store cur-

rent settings into preset 1.

M2 - Used to select memory preset 2 or to store

current settings into preset 2.

M3 - Used to select memory preset 3 or to store

current settings into preset 3.

M4 - Used to select memory preset 4 or to store

current settings into preset 4.

ESC - Used to exit the current menu.

ENT - Used to enter the selected menu.

HOME - Used to return to the Main menu and

other functions explained later.

UP - Used to advance up through menu selections

and/or adjust amplifier controls.

DOWN - Used to advance down through menu

selections and/or adjust amplifier controls.

These controls and their usage will be explained later with

more detail in each menu usage section.

ESC

ENT

HOME

4SX .2 Series Amplifiers

Features

ISIS VFD Display

SYS

MEM-1

GAIN EQ LPF HPF KOMP

AMP1

LOCK

MEM-2 MEM-3 MEM-4

PHASE

MUTE

AMP2

LEFT RIGHT

* * kicker

Meet the interface (Indicate Status & Input Settings).ISIS

The ISIS (pronounced eye-sis) allows you to view the cur-

rent conditions and settings of your amplifier as well as

change the many user-adjustable settings.The ISIS system

consists of the VFD (Vacuum Fluorescent Display) and the nine

soft touch buttons that make up the KEYPAD.

M1 M2 M3 M4

ESC ENTHOME

SYS

MEM-1

GAIN EQ LPF HPF KOMP

AMP1

LOCK

MEM-2 MEM-3 MEM-4

PHASE

MUTE

AMP2

LEFT RIGHT

* * kicker

ISIS

VFD

ISIS

KEYPAD

Here is a brief description of the indicators found on the

VFD.

AMP1 - Indicates amplifier 1 is selected for adjustment. Only

available in four channel amps.

AMP2 - Indicates amplifier 2 is selected for adjustment.

Only available in four channel amps.

LOCK - Indicates the amplifier controls are locked out and

not usable.

LEFT - Indicates an action or adjustment of the left channel.

SYS - Indicates you are in the system menu.

RIGHT - Indicates an action or adjustment of the right

channel.

MUTE - Indicates you are in the mute menu or the mute

function is active.

Produktspecifikationer

Varumärke:	Kicker
Kategori:	bilradio
Modell:	SX500.2
Typ av operation:	Draaiknop
Power grill:	3800 W
Färg på produkten:	Roestvrijstaal
Inbyggd display:	Ja
Vikt:	80000 g
Bredd:	760 mm
Djup:	740 mm
Höjd:	1170 mm
Grill:	Ja
Fördröjd starttimer:	Ja
Årlig-energiförbrukning:	564 kWu
Typ av material (överst):	Glaskeramiek
Brännare/kokzonseffekt 2:	1500 W
Brännare/kokzonseffekt 3:	3000 W
Antal brännare/kokzoner:	5 zone(s)
Typ av häll:	Keramisch
Brännare/kokzon typ 2:	Medium
Typ av brännare/kokzon 3:	Groot
Total inomhuskapacitet (ugnar):	- l
Ugnens strömkälla:	Electrisch
Antal ugnar:	1
Antal elektroniska kokzoner:	5 zone(s)
Kontrollposition:	Bovenaan de achterkant
Typ av rengöring:	Stoom
Att laga:	Ja
Total ugnseffekt:	2850 W
Självrengörande:	Ja
Justerbara fötter:	Ja
Ugnsläge:	Bodem
Ugn med bruttokapacitet:	- l
Antal hyllor:	3 schappen
Antal hyllplatser:	6
Ugnskraft:	2850 W
Brännare/kokzons diameter 2:	152.4 mm
Brännare/kokzons diameter 3:	304.8 mm
AC-ingångsspänning:	208 - 240 V
Typ produkt:	Vrijstaand fornuis