Klark Teknik CM-1 Bruksanvisning

Klark Teknik mikrofon CM-1

Läs nedan 📖 manual på svenska för Klark Teknik CM-1 (2 sidor) i kategorin mikrofon. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Quick Start Guide

MIC BOOSTER CT 1 / CM-1 / CM-2

Thank you for purchasing a Klark Teknik Mic Booster! These compact units add signicant gain boost to your passive microphone signal to

ensure strong, clear delivery to a mixing board, preamplier or interface.

*note – the CT 1 can also be connected directly to most microphones

Setup Procedure

Warning – either mute the mixer channel, lower the volume all the way, or turn o the speaker system before making connections.

1. Connect a fairly short balanced XLR cable (<30 feet) from the microphone to the input of your Mic Booster. Note that phantom power

cannot be passed to condenser mics, and therefore they shouldn't be used along with a mic booster unit.

2. Connect the output of the Mic Booster to a mixer, preamp, or interface via balanced XLR cable. Long cable runs can be used for

this connection if necessary, but high quality XLR cables with low capacitance are recommended to avoid high frequency degradation.

3. Engage phantom power on the mixer or other receiving equipment.

4. Check the gain setting on the receiving channel of your mixer or interface since the signal will be much greater than typical mic levels.

OutputInput

Dynamic or

passive ribbon

microphone

CT 1, CM-1, or CM-2

Mixer with phantom

power engaged

Specications

CT 1 CM-1 CM-2

Input

Connector 1 x XLR, balanced 1 x XLR, balanced 2 x XLR, balanced

Impedance 7 kΩ

Maximum input level -15 dBu

Output

Connector 1 x XLR, balanced 1 x XLR, balanced 2 x XLR, balanced

Impedance 2 kΩ

Maximum gain +25 dB, 10 kΩ load

Maximum output level +10 dBu, 10 kΩ load

System

Frequency response 10 Hz to 20 kHz (± 1 dB)

THD + N <0.02% @ 1 kHz, 0 dBu

EIN noise @ +25 dB gain >120 dB, 22 Hz-22 kHz, unweighted

Power requirements 48 V phantom power

Physical

Dimensions 24 x 25 x 78 mm

(0.9 x 1.0 x 3.1")

38 x 39 x 85 mm

(1.5 x 1.5 x 3.3")

65 x 39 x 85 mm

(2.6 x 1.5 x 3.3")

Weight 0.1 kg (0.22 lbs) 0.25 kg (0.55 lbs) 0.37 kg (0.81 lbs)

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any

description, photograph, or statement contained herein. Technical specications, appearances and other information are

subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen,

Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please

see complete details online at musictribe.com/warranty.

MUSIC Tribe Brands UK Ltd.

Quay House,City Partk Business Village,5 Brindley Road, Old Traord, Manchester, M16 9UN, United Kingdom

Zhongshan Eurotec Electronics Limited

No. 10 Wanmei Road, South China Modern Chinese Medicine Park, Nanlang Town, 528451, Zhongshan City,

Guangdong Province, China

Produktspecifikationer

Varumärke:	Klark Teknik
Kategori:	mikrofon
Modell:	CM-1
Färg på produkten:	Zwart
Vikt:	3200 g
Bredd:	330.2 mm
Djup:	222.2 mm
Höjd:	209.5 mm
Husmaterial:	Aluminium
Blåtand:	Nee
Anslutningsteknik:	Bedraad
Typ av strömkälla:	AC
Snabbstartsguide:	Ja
Genomsnittlig effekt:	150 W
Plug and play:	Ja
Rekommenderad användning:	Tuin
Impedans:	8 Ohm
Lämplig för utomhusbruk:	Ja
Ljudutgångskanaler:	2.0 kanalen
Högtalarplacering:	Floor, Tabletop/bookshelf
Bashögtalare:	Ja
Frekvensomfång:	64 - 20000 Hz
Känslighet:	91 dB
Typ av högtalare:	2-weg
Förstärkare:	Ingebouwd
Diameter woofer:	165 mm
Diameter högtonenhögtalare:	25 mm
Tweeter:	Ja