Synco P2S Bruksanvisning

Synco mikrofon P2S

Läs nedan 📖 manual på svenska för Synco P2S (2 sidor) i kategorin mikrofon. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Microphone P2 Series

User Manual

Thank you for choosing SYNCO product. Please read this manual

carefully before use and follow all instructions mentioned herein.

Transmitter x2 Wireless Charging

Storage x1

Charging cable x1Mic Windshield x2

1. TX Transmitter

2. RX Receiver

3. Wireless Charging Case

① Power Key

② Working Indicator

③ Built-in Microphone

④ Contacts

⑤ Back Clip

Lightning Connector

Type-C Connector

① Volume Button

② Type-C Port

③ Working Indicator

④ Connector

⑤ Contacts

① Pairing Key /

Power Indicator Key

② Type-C port

③ Working Indicator

④ Contacts

Caring For Your SYNCO Product

Package List

Product Introduction

· Please keep the product in a dry, clean, dust-free environment.

· Keep corrosive chemicals, liquids and heat source away from the

product to prevent mechanics damage.

· Use only a soft and dry cloth for cleaning the product.

· Malfunction may be caused by dropping, impact of external force.

· Do not attempt to disassemble the product. Doing so voids

warranty.

· Please have the product checked or repaired by authorized

technicians if any malfunctions happened.

· Failure to follow all the instructions may result in mechanics

damage.

· Warranty does not apply to human errors.

Receiver (Type-C or

Lightning Connector) x1

4.Indicator

① Transmitter

② Receiver

③ Wireless Charging Case

Fast Flash

Left Right

Fast Flash

1~5 indicators on

Single indicator keeps on

(In the case)

Slow Flash

Illuminate sequentially

1~5 indicators on

Single indicator keeps on

Single indicator 󽗊ashed

slowly

Pairing

The number of lights on indicates the

current volume

Charging, and turns o󽗈 when fully

charged

Unpaired

Paired, normal working

Connected and working normally.

The number of lights on indicates the

current volume

Noise cancellation on

Mute on

Working Indicators (White Light) On： Flash：

Working Indicators (Red Light) On： Flash：

Left Right

1. Basic operations

2. Turn it on/o󽗈

Operations

Tap the drawer to the right of the charging box and take out the

transmitter and receiver.

Transmitter:

The transmitter(s) automatically turn(s) on after be taken out, and

automatically shut down when be put back into the charging box;

(Force switch on and o󽗈: long press the power button of the

transmitter for 3 seconds)

*Note: The transmitter will shut down automatically if it unpaired or

disconnected for 5 minutes.

3. Charge

Receiver:

Insert the mobile phone device to switch on automatically, and the

indicator 󽗊ashes.

*Note: You can check whether the mobile phone OTG is on when he

receiver indicator is not on after be inserted to the mobile phone.

Transmitter:

Connect the contact of transmitter to the charging box when put the

transmitter back into the charging box.

Charging case:

Connected the charging box to the power supply through the

charging cable, and the charging box water lamp circulates during

charging.

Short press the power indicator button, the number of indicator

lights shows the power condition.

Charging Mobile phone :

Insert your phone's charging cable into the Type-C port of the

receiver when in use, and the charging current is adjusted according

to the phone's battery max up to 800mA。

*Note: The receiver does not need to be charged and can be used

directly when plugged in the phone.

Guangzhou Zhiying Technology Co., Ltd

Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue,

Liwan District, Guangzhou, China, 510000

support@syncoaudio.com

www.syncoaudio.cn

Warranty Period

Warranty Exclusions and Limitations

Warranty Claim Procedure

Thank you for purchasing SYNCO products.

1. Customers are entitled to free replacement or repair service in case

of quality defect(s) found in the product under normal use within 30

days upon receipt of the product.

2. Original SYNCO products are entitled to 12-month limited warranty

service. The warranty period begins on the date of purchase of brand

new, unused products by the 󽗉rst end-user.

Faults resulted from inappropriate use of a product without

following its operation speci󽗉cation

1. Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking

2. Modi󽗉cations to a product by its user or a third party without prior

written consent of SYNCO, e.g. replacement of element or circuit,

label alteration

3. The code on product is inconsistent with that of warranty

certi󽗉cate, or the code on the product or warranty certi󽗉cate is

altered or torn o󽗈

4. All consumable accessory attached to a product, like cable, wind

mu󽗈, battery

5. Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.

1. If failure or any problem occurs to your product after

purchase, please contact a local agent for assistance, or you can

always contact SYNCO’s customer service through email at

support@syncoaudio.com.

2. Please retain your sales receipt and warranty certi󽗉cate as proof of

purchase. If any of these documents is missing, only sales return or

chargeable service will be provided.

3. If the SYNCO product is out of the warranty coverage, the service

and the parts cost will be charged.

Warranty

Within the warranty period, if product defect or failure is attributable

to material defection or technological problem, the defective product

or defective part will be repaired or replaced without charge (service

and materials fee).

*Please register your warranty. Meanwhile, you are welcomed to contact us via Email：

support@syncoaudio.com

WARRANTY CERTIFICATE

Wireless Transmission

RF Frequency Band

Frequency Response

Working Distance

Sampling Rate

Bit Depth

Sensitivity

SNR

Battery Type

Battery Charging Time

Battery Life

Dimensions

Material

Weight

Wireless Transmission

RF Frequency Band

Working Distance

Sampling Rate

Bit Depth

Connector

Power Input

Dimensions

Material

Weight

Battery Type

Battery Charging Time

Charging Port

Power Requirements

Dimensions

Weight

Digital 2.4GHz

2400-2483.5MHz

20Hz-20KHz

492ft/150m(LOS area);

164ft/50m(NLOS area)

48KHz

16Bit

-36dB

＞ 75dB

Built-in Lithium Battery, 120mAh

1.5H

49x19x19 (mm)

ABS

10g

Digital 2.4GHz

2400-2483.5MHz

492ft/150m(LOS area);

164ft/50m(NLOS area)

48KHz

16Bit

Type-C or Lightning Output

Type-C

49x30x9 (mm)

ABS

Built-in Lithium Battery, 700mAh

Type-C Port

5V 2A

70x68x38(mm)

87.5g

5. Adjust the volume

TX Transmitter

RX Receiver

Wireless Charging Case

6. Noise reduction

Click the receiver volume button to adjust the volume and the

number of indicators shows the current volume level.

Double click the volume button to enable or disable mute and single

indicator keeps on when mute is on.

Click the power button of the transmitter to turn on the noise

reduction, and single indicator keeps on.

* Double click the power button of the transmitter to turn o󽗈/on the

light e󽗈ect.

Speci󽗉cations

4. Paring

Pairing in the charging box:

① Place the transmitter and receiver in the charging box, and

connect the contact with the contact of the charging box;

② Open the charging box, press and hold the matching button on

the box for 3 seconds;

③ The indicator lights of the transmitter and receiver cycle, and the

pairing is successful.

Pairing in use:

① The receiver has been inserted into the mobile phone and is

switched on;

② Turn o󽗈 the transmitter, press and hold for 8 seconds when it is

turned o󽗈, and wait for 󽗉ve indicator lights to 󽗊ash quickly to enter

the frequency alignment state.

③ The working indicator light of transmitter and receiver is broken,

and the matching is successful.

Product Model:

Date of Purchase:

Serial Number:

Malfunction Description :

Buyer Name:

Buyer Telephone :

Buyer Mail :

Buyer Address :

Dealer :

Dealer Telephone :

Delivery Date :

Cause of Malfunction :

Maintenance Personnel :

Malfunction Processing :

Produktspecifikationer

Varumärke:	Synco
Kategori:	mikrofon
Modell:	P2S

Behöver du hjälp?

Om du behöver hjälp med Synco P2S ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

mikrofon Synco Manualer

Synco LAV-S6P Bruksanvisning

29 Mars 2025

Synco MA30 Bruksanvisning

27 Mars 2025

Synco P2S Bruksanvisning

27 Mars 2025

Synco WAir-G2-A1 Bruksanvisning

26 Februari 2025

Synco WAir-G2-A2 Bruksanvisning

29 December 2024

Synco CMic-V1M Bruksanvisning

10 September 2024

Synco Mic-M3 Bruksanvisning

10 September 2024

Synco Vlogger Kit 1 Bruksanvisning

10 September 2024

Synco Vlogger Kit 2 Bruksanvisning

10 September 2024

Synco MIC-D2 Bruksanvisning

9 September 2024

mikrofon Manualer

Nyaste mikrofon Manualer

Samson Concert XD2 Bruksanvisning

30 Mars 2025

TC Helicon GoXLR MIC Bruksanvisning

27 Mars 2025

Astatic 827A Bruksanvisning

27 Mars 2025

MXL Forge Bruksanvisning

22 Mars 2025

Austrian Audio OC16 Bruksanvisning

19 Mars 2025

Kenwood KMC-66 Bruksanvisning

18 Mars 2025

Kenwood KMC-70 Bruksanvisning

18 Mars 2025

Kenwood KMC-32 Bruksanvisning

18 Mars 2025

Comica Vimo C2 Bruksanvisning

12 Mars 2025

Louroe Electronics Verifact B Bruksanvisning

10 Mars 2025