Konig CMP-ADSL2ROU20 Bruksanvisning

Konig Router CMP-ADSL2ROU20

Läs nedan 📖 manual på svenska för Konig CMP-ADSL2ROU20 (24 sidor) i kategorin Router. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/24
CMP-ADSL2ROU20
MANUAL (p. 2)
ADSL MODEM/ROUTER 4 PORT
MODE D’EMPLOI (p. 5)
MODEM/ROUTEUR ADSL 4 PORTS
MANUALE (p. 8)
MODEM/ROUTER ADSL - 4 PORTE
BRUKSANVISNING (s. 14)
ADSL MODEM/ROUTER 4 PORT
MANUAL DE UTILIZARE (p. 17)
MODEM/ROUTER ADSL CU 4 PORTURI
BRUGERVEJLEDNING (p. 20)
ADSL MODEM/ROUTER 4 PORTE
HASZNÁLATI ÚTMUTATÓ (o. 11.)
4 PORTOS ADSL MODEM/ROUTER
KÄYTTÖOHJE (s. 12)
ADSL MODEEMI/REITITIN 4 PORTTIA
ANLEITUNG (s. 3)
ADSL 4-PORT MODEM/ROUTER
GEBRUIKSAANWIJZING (p. 6)
ADSL MODEM/ROUTER 4 PORT
MANUAL DE USO (p. 9)
MODEM/ROUTER ADSL DE 4
PUERTOS
NÁVOD K POUŽITÍ (s. 15)
ADSL MODEM/ROUTER SE 4 PORTY
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 18)
ADSL MODEM/ROUTER 4 ΘΥΡΩΝ
VEILEDNING (p. 21)
ADSL-MODEM/RUTER 4 PORTS
2
ENGLISH
Installation
Internet
1. Use the included power adapter and plug it into the power port.
2. Use your ADSL signal cable and plug it into the voice splitter.
3. Use the included RJ-11 cable and plug it into the voice splitter and the modem/router.
4. Use the included RJ-11 cable and plug it into the voice splitter and your phone.
5. Use the enclosed RJ-45 cable and plug it into the modem/router and the PC (or switch).
6. Press the power switch to ON.
7. Use the enclosed USB cable to connect the modem/router to the PC instead of a RJ-45 cable
(install the enclosed driver for enabling this option).
8. When you need to reset the modem/router please press the RESET button.
Description of the LED indicator
LED indicator Description
PWR Always ON Indicates the device is powered up
SYS Blinking Indicates the system is working correctly
DSL Always ON Indicates DSL connection with terminal is OK
Blinking Indicates DSL cable is implementing data negotiation with terminal
LAN Always ON Indicates the device is connected well with the PC
Blinking Indicates the device is transmitting and receiving data with the PC
USB Blinking Indicates the USB connection is OK or transmitting and receiving data
Logging in to the modem/router
Browse to: http://192.168.1.1
User name: admin
Password: admin
For the full manual and installation software please open the enclosed CD
3
Safety precautions:
RIS K OF ELECT RIC S KHOC
DO NO T O PEN
CAUTION
To reduce risk of electric shock, this product should ONLY be opened by
an authorized technician when service is required. Disconnect the product
from mains and other equipment if a problem should occur. Do not
expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modications of the product or
damage caused due to incorrect use of this product.
General:
Designs and specications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Keep this manual for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system for
these products.
DEUTSCH
Einrichtung
Internet
1. Verwenden Sie das mitgelieferte Netzteil und stecken Sie es in die Steckdose.
2. Verbinden Sie Ihr DSL-Kabel mit dem DSL-Splitter.
3. Verbinden Sie den Splitter mit Hilfe des mitgelieferten RJ-11 Kabels mit dem Modem/Router.
4. Verbinden Sie Ihr Telefon mit Hilfe des mitgelieferten RJ-11 Kabels mit dem Splitter.

Produktspecifikationer

Varumärke: Konig
Kategori: Router
Modell: CMP-ADSL2ROU20

Behöver du hjälp?

Om du behöver hjälp med Konig CMP-ADSL2ROU20 ställ en fråga nedan och andra användare kommer att svara dig




Router Konig Manualer

Router Manualer

Nyaste Router Manualer