Makita DTM52Z Bruksanvisning
Makita
Multiverktyg
DTM52Z
Läs nedan 📖 manual på svenska för Makita DTM52Z (34 sidor) i kategorin Multiverktyg. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/34
INSTRUCTION MANUAL
Cordless Multi Tool
DTM52
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DTM52
Oscillation per minute 10,000 - 20,000 min
-1
Oscillation angle, left/right 1.8° (3.6° total)
Overall length with BL1820B 305 mm
with BL1860B 322 mm
Net weight 1.7 - 2.0 kg
Rated voltage D.C. 18 V
•
Due to our continuing program of research and development, the specications herein are subject to change without notice.
• Specications may dier from country to country.
• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Applicable application tool
Use the application tool which type is adaptable to this
tool as shown in the following table.
OIS
STARLOCK PLUS
STARLOCK
STARLOCK MAX
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for sawing and cutting wood,
plastic, gypsum, non-ferrous metals, and fastening
elements (e.g. nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and scrap-
ing of small surfaces. It is especially for working close to
edge and ush cutting.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-4:
Work mode: Sanding
Sound pressure level (L
pA) : 69 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
The typical A-weighted noise level determined accord-
ing to EN62841-1:
Work mode: Cutting with plunge cut saw blade
Sound pressure level (L
pA) : 72 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
3 ENGLISH
The typical A-weighted noise level determined accord-
ing to EN62841-1:
Work mode: Cutting with segmental saw blade
Sound pressure level (L
pA) : 76 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
The typical A-weighted noise level determined accord-
ing to EN62841-1:
Work mode: Scraping
Sound pressure level (L
pA) : 71 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-4:
Work mode: Sanding
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-1:
Work mode: Cutting with plunge cut saw blade
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-1:
Work mode: Cutting with segmental saw blade
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-1:
Work mode: Scraping
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING: The vibration emission during
actual use of the power tool can dier from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Multiverktyg |
| Modell: | DTM52Z |
Behöver du hjälp?
Om du behöver hjälp med Makita DTM52Z ställ en fråga nedan och andra användare kommer att svara dig
Multiverktyg Makita Manualer
16 Oktober 2024
9 Oktober 2024
29 September 2024
4 September 2024
24 Augusti 2024
9 Augusti 2024
7 Augusti 2024
6 Augusti 2024
6 Augusti 2024
2 Augusti 2024
Multiverktyg Manualer
- Multiverktyg Bosch
- Multiverktyg AEG
- Multiverktyg DeWalt
- Multiverktyg Ferm
- Multiverktyg Ozito
- Multiverktyg Gude
- Multiverktyg Black And Decker
- Multiverktyg Vonroc
- Multiverktyg Skil
- Multiverktyg Hilti
- Multiverktyg Ryobi
- Multiverktyg Taurus
- Multiverktyg Festool
- Multiverktyg Metabo
- Multiverktyg Parkside
- Multiverktyg Worx
- Multiverktyg Meec Tools
- Multiverktyg Milwaukee
- Multiverktyg Dremel
- Multiverktyg Einhell
- Multiverktyg Baumr-AG
- Multiverktyg Powerplus
- Multiverktyg Porter-Cable
- Multiverktyg Cotech
- Multiverktyg Topcraft
- Multiverktyg Powerfix
- Multiverktyg Bavaria
- Multiverktyg Lezyne
- Multiverktyg Varo
- Multiverktyg Max
- Multiverktyg Cocraft
- Multiverktyg Meister Craft
- Multiverktyg Toolcraft
- Multiverktyg Proxxon
- Multiverktyg Leatherman
- Multiverktyg Fein
- Multiverktyg Graphite
- Multiverktyg Robust
- Multiverktyg Ergotools Pattfield
- Multiverktyg McKenzie
- Multiverktyg G-Technology
- Multiverktyg CMT Orange Tools
- Multiverktyg Donau Elektronik
Nyaste Multiverktyg Manualer
27 Oktober 2024
21 Oktober 2024
17 Oktober 2024
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
14 Oktober 2024
11 Oktober 2024
11 Oktober 2024