Makita TM3000CX3 Bruksanvisning
Makita
Multiverktyg
TM3000CX3
Läs nedan 📖 manual på svenska för Makita TM3000CX3 (25 sidor) i kategorin Multiverktyg. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/25
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Multi Tool
TM3000C
012849
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model TM3000C
Oscillation per minute 6,000 - 20,000 (min
-1)
Oscillation angle, left/right 1.6 ﾟ (3.2 ﾟ total)
Overall length 275 mm
without dust extraction attachment
1.4 kg
Net weight
with dust extraction attachment
1.5 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-6
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Wear safety glasses.
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE080-1
Intended use
The tool is intended for sawing and cutting wood, plastic,
gypsum, non-ferrous metals, and fastening elements (e.
g. unhardened nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and
scraping of small surfaces. It is especially for working
close to edge and flush cutting.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Work mode: Sanding
Sound pressure level (L
pA) : 74 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with plunge cut saw blade
Sound pressure level (L
pA) : 78 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with segmental saw blade
Sound pressure level (L
pA) : 76 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Scraping
Sound pressure level (L
pA) : 77 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: Sanding
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Work mode: Cutting with plunge cut saw blade
Vibration emission (ah) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: Cutting with segmental saw blade
Vibration emission (ah) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: Scraping
Vibration emission (ah) : 5.5 m/s2
Uncertainty (K) : 1.5 m/s2
3
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-17
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Multi Tool
Model No./ Type: TM3000C
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
31.12.2013
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
10. Use of power supply via a RCD with a rated
residual current of 30mA or less is always
recommended.
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Multiverktyg |
| Modell: | TM3000CX3 |
Behöver du hjälp?
Om du behöver hjälp med Makita TM3000CX3 ställ en fråga nedan och andra användare kommer att svara dig
Multiverktyg Makita Manualer
16 Oktober 2024
9 Oktober 2024
29 September 2024
4 September 2024
24 Augusti 2024
9 Augusti 2024
7 Augusti 2024
6 Augusti 2024
6 Augusti 2024
2 Augusti 2024
Multiverktyg Manualer
- Multiverktyg Bosch
- Multiverktyg AEG
- Multiverktyg DeWalt
- Multiverktyg Ferm
- Multiverktyg Ozito
- Multiverktyg Gude
- Multiverktyg Black And Decker
- Multiverktyg Vonroc
- Multiverktyg Skil
- Multiverktyg Hilti
- Multiverktyg Ryobi
- Multiverktyg Taurus
- Multiverktyg Festool
- Multiverktyg Metabo
- Multiverktyg Parkside
- Multiverktyg Worx
- Multiverktyg Meec Tools
- Multiverktyg Milwaukee
- Multiverktyg Dremel
- Multiverktyg Einhell
- Multiverktyg Baumr-AG
- Multiverktyg Powerplus
- Multiverktyg Porter-Cable
- Multiverktyg Cotech
- Multiverktyg Topcraft
- Multiverktyg Powerfix
- Multiverktyg Bavaria
- Multiverktyg Lezyne
- Multiverktyg Varo
- Multiverktyg Max
- Multiverktyg Cocraft
- Multiverktyg Meister Craft
- Multiverktyg Toolcraft
- Multiverktyg Proxxon
- Multiverktyg Leatherman
- Multiverktyg Fein
- Multiverktyg Graphite
- Multiverktyg Robust
- Multiverktyg Ergotools Pattfield
- Multiverktyg McKenzie
- Multiverktyg G-Technology
- Multiverktyg CMT Orange Tools
- Multiverktyg Donau Elektronik
Nyaste Multiverktyg Manualer
27 Oktober 2024
21 Oktober 2024
17 Oktober 2024
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
14 Oktober 2024
11 Oktober 2024
11 Oktober 2024