Makita DUN461WZ Bruksanvisning

Makita Häcksax DUN461WZ

Läs nedan 📖 manual på svenska för Makita DUN461WZ (16 sidor) i kategorin Häcksax. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/16
INSTRUCTION MANUAL
Cordless Pole Hedge Trimmer
DUN461W
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUN461W
Blade length 460 mm
Strokes per minute 3,600 min-1
Cutting blade angle 135° (up 60°, down 75°)
Overall length 1,889 - 2,511 mm
Rated voltage D.C. 18 V
Net weight 3.0 - 3.3 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Recommended cord connected power source
Portable power pack PDC01
• Thecordconnectedpowersource(s)listedabovemaynotbeavailabledependingonyourregionofresidence.
• Beforeusingthecordconnectedpowersource,readinstructionandcautionarymarkingsonthem.
Symbols
Thefollowingsshowthesymbolswhichmaybeused
fortheequipment.Besurethatyouunderstandtheir
meaning before use.
Read instruction manual.
Do not expose to moisture.
Wear a helmet, goggles and ear protection.
DANGER-Keephandsawayfromblade.
Beware of electrical lines, risk of electrical
shock.
Keep distance at least 15 m.
Ni-MH
Li-ion
OnlyforEUcountries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
andbatteriesmayhaveanegativeimpact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulatorsshouldbestoredseparately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
Thisisindicatedbythesymbolofthe
crossed-out wheeled bin placed on the
equipment.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation
Intended use
The tool is intended for trimming hedges.
3 ENGLISH
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841-4-2:
Sound pressure level (LpA ) : 74 dB(A)
Uncertainty(K):3dB(A)
Thenoiselevelunderworkingmayexceed80dB(A).
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.
NOTE:
Thedeclarednoiseemissionvalue(s)may
alsobeusedinapreliminaryassessmentofexposure.
WARNING: Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o and when
it is running idle in addition to the trigger time).
Vibration
Applicable standard : EN62841-4-2
Left hand (Front grip) Right hand (Rear grip)
ah (m/s2)UncertaintyK(m/s2) ah (m/s2)UncertaintyK(m/s2)
2.5 m/s2 or less 2.5 m/s1.5 2 or less 1.5
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
maybeusedforcomparingonetoolwithanother.
NOTE:Thedeclaredvibrationtotalvalue(s)mayalsobeusedinapreliminaryassessmentofexposure.
WARNING: The vibration emission during actual use of the power tool can dier from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specications provided with this
power tool. Failure to follow all instructions listed below
mayresultinelectricshock,reand/orseriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated(corded)powertoolorbattery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
whichmayignitethedustorfumes.
3.
Keep children and bystanders away while operating
a power tool.Distractionscancauseyoutolosecontrol.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tricshockifyourbodyisearthedorgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
7. Power tools can produce electromagnetic
elds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.

Produktspecifikationer

Varumärke: Makita
Kategori: Häcksax
Modell: DUN461WZ

Behöver du hjälp?

Om du behöver hjälp med Makita DUN461WZ ställ en fråga nedan och andra användare kommer att svara dig


Häcksax Makita Manualer

Makita

Makita DUH604S Bruksanvisning

22 December 2024
Makita

Makita UH5520 Bruksanvisning

4 Oktober 2024
Makita

Makita UN5400 Bruksanvisning

27 September 2024
Makita

Makita UH5570 Bruksanvisning

20 September 2024
Makita

Makita DUH604SRT Bruksanvisning

16 September 2024
Makita

Makita DUH523RT Bruksanvisning

11 September 2024
Makita

Makita DUN461WZ Bruksanvisning

30 Augusti 2024
Makita

Makita DUH523 Bruksanvisning

24 Augusti 2024
Makita

Makita UH200DWX Bruksanvisning

22 Augusti 2024
Makita

Makita EN5950SH Bruksanvisning

15 Augusti 2024

Häcksax Manualer

Nyaste Häcksax Manualer

WOLF-Garten

WOLF-Garten HS 43 E Bruksanvisning

16 Januari 2025
Bosch

Bosch AHS 650-24 Bruksanvisning

16 Januari 2025
Bosch

Bosch AMW HS Bruksanvisning

16 Januari 2025
Bosch

Bosch AHS 6000 PRO Bruksanvisning

16 Januari 2025
Bosch

Bosch AHS 63-16 Bruksanvisning

16 Januari 2025
Al-ko

Al-ko HT 600 FLEXIBLE CUT Bruksanvisning

13 Januari 2025
Einhell

Einhell GC-PH 2155 Bruksanvisning

8 Januari 2025
Fieldmann

Fieldmann FZN 1001-A Bruksanvisning

8 Januari 2025
Echo

Echo HC-1500 Bruksanvisning

8 Januari 2025
DeWalt

DeWalt DCHT821 Bruksanvisning

3 Januari 2025