Makita TM3000CX1J Bruksanvisning
Makita
Multiverktyg
TM3000CX1J
Läs nedan 📖 manual på svenska för Makita TM3000CX1J (44 sidor) i kategorin Multiverktyg. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/44
1
GB Multi Tool INSTRUCTION MANUAL
S Multifunktionell maskin BRUKSANVISNING
N Flerfunksjonsverktøy BRUKSANVISNING
FIN Monitoimityökalu KÄYTTÖOHJE
LV Daudzfunkciju darbarīks LIETOŠANAS INSTRUKCIJA
LT Daugiafunkcis įrankis NAUDOJIMO INSTRUKCIJA
EE Universaalne tööriist KASUTUSJUHEND
RUS Универсальный Резак
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
TM3000C
2
1
1 012768
1
2 012852
1
3
2
3 012888
12
3
4 012851
1
2
3
4
5 012850 6 012889
7 012853
8 012855
3
ENGLISH (Original instructions)
Explanation of general view
1-1. Slide switch
2-1. Dial
3-1. Application tool installation bolt
3-2. Holes in the application tool
3-3. Protrusions of the tool flange
4-1. Application tool installation bolt
4-2. Hex wrench
4-3. Tighten
5-1. Application tool installation bolt
5-2. Holes in the application tool
5-3. Adapter
5-4. Protrusions of the tool flange
SPECIFICATIONS
Model TM3000C
Oscillation per minute 6,000 - 20,000 (min
-1)
Oscillation angle, left/right 1.6 ﾟ (3.2 ﾟ total)
Overall length 275 mm
without dust extraction attachment
1.4 kg
Net weight
with dust extraction attachment
1.5 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE080-1
Intended use
The tool is intended for sawing and cutting wood, plastic,
gypsum, non-ferrous metals, and fastening elements (e.
g. unhardened nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and
scraping of small surfaces. It is especially for working
close to edge and flush cutting.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Work mode: Sanding
Sound pressure level (L
pA) : 74 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with plunge cut saw blade
Sound pressure level (L
pA) : 78 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with segmental saw blade
Sound pressure level (L
pA) : 76 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Scraping
Sound pressure level (L
pA) : 77 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: Sanding
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Work mode: Cutting with plunge cut saw blade
Vibration emission (ah) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: Cutting with segmental saw blade
Vibration emission (ah) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: Scraping
Vibration emission (ah) : 5.5 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Multiverktyg |
| Modell: | TM3000CX1J |
Behöver du hjälp?
Om du behöver hjälp med Makita TM3000CX1J ställ en fråga nedan och andra användare kommer att svara dig
Multiverktyg Makita Manualer
16 Oktober 2024
9 Oktober 2024
29 September 2024
4 September 2024
24 Augusti 2024
9 Augusti 2024
7 Augusti 2024
6 Augusti 2024
6 Augusti 2024
2 Augusti 2024
Multiverktyg Manualer
- Multiverktyg Bosch
- Multiverktyg AEG
- Multiverktyg DeWalt
- Multiverktyg Ferm
- Multiverktyg Ozito
- Multiverktyg Gude
- Multiverktyg Black And Decker
- Multiverktyg Vonroc
- Multiverktyg Skil
- Multiverktyg Hilti
- Multiverktyg Ryobi
- Multiverktyg Taurus
- Multiverktyg Festool
- Multiverktyg Metabo
- Multiverktyg Parkside
- Multiverktyg Worx
- Multiverktyg Meec Tools
- Multiverktyg Milwaukee
- Multiverktyg Dremel
- Multiverktyg Einhell
- Multiverktyg Baumr-AG
- Multiverktyg Powerplus
- Multiverktyg Porter-Cable
- Multiverktyg Cotech
- Multiverktyg Topcraft
- Multiverktyg Powerfix
- Multiverktyg Bavaria
- Multiverktyg Lezyne
- Multiverktyg Varo
- Multiverktyg Max
- Multiverktyg Cocraft
- Multiverktyg Meister Craft
- Multiverktyg Toolcraft
- Multiverktyg Proxxon
- Multiverktyg Leatherman
- Multiverktyg Fein
- Multiverktyg Graphite
- Multiverktyg Robust
- Multiverktyg Ergotools Pattfield
- Multiverktyg McKenzie
- Multiverktyg G-Technology
- Multiverktyg CMT Orange Tools
- Multiverktyg Donau Elektronik
Nyaste Multiverktyg Manualer
27 Oktober 2024
21 Oktober 2024
17 Oktober 2024
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
14 Oktober 2024
11 Oktober 2024
11 Oktober 2024