Metra 107-KI2HG Bruksanvisning

Läs nedan 📖 manual på svenska för Metra 107-KI2HG (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 2/15/22 INST107-KI2HG
I N S TA L L AT I O N I N S T R U C T I O N S
107-KI2HG
Patent Pending
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT FEATURES
Designed specifically for Pioneer modular 6.8” radios like the
DMH-C2550NEX and DMH-C2500NEX. †
† Refer to the radio manufacturer for current models
Both textured and painted gloss black to match the factory finish.
KIT COMPONENTS
A) Front panel • B) Back panel • C) Radio chassis brackets • D) Radio display brackets • E) Display trim panel • F) #8 x 3/8” Phillips screws (4)
• G) #4 x 3/8” Phillips screws (10) • H) Panel clips (4)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ..............................................2-4
Kit Preparation .......................................................5
Kit Assembly ...................................................... 6-7
A CB D E
H
Kia K5 2021-Up
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness:
Visit metraonline.com for audio/
video and steering wheel control interface options.
Antenna Adapter: Not required
F G
386.257.1187
|
MetraOnline.com
2
1. Unclip and remove the trim panel from
the passenger side of the dash.
(Figure A)
2. Remove (2) Phillips screws exposed
after removing side panel in step 1.
(Figure B)
DASH DISASSEMBLY
3. Unclip the trim panel above the glove
box and let hang. Note: You do not need
to remove the entire panel.
(Figure C)
4. Remove (3) Phillips screws exposed
after unclipping panel above glove box
in step 3. (Figure C)
5. For models equipped with key cylinder
start on steering column:
Unclip the right side of the trim panel to
the right of the steering column below
the instrument cluster. Note: You do not
need to remove the entire trim panel.
(Figure D)
Continued on the next page
(Figure A) (Figure C)
(Figure B) (Figure D)
REV. 2/15/2022 INST107-KI2HG 3
DASH DISASSEMBLY (CONT.)
(Figure E) (Figure F)
6. Unclip and remove the trim panel below
the radio. (Figure E)
7. Unclip and remove the small trim panel
behind the radio screen then remove the
(2) Phillips screws exposed. (Figure F, G)
Continued on the next page
(Figure G)

Produktspecifikationer

Varumärke: Metra
Kategori: Inte kategoriserad
Modell: 107-KI2HG

Behöver du hjälp?

Om du behöver hjälp med Metra 107-KI2HG ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Metra Manualer

Metra

Metra 71-017C Bruksanvisning

26 September 2024
Metra

Metra AXSP-HK Bruksanvisning

26 September 2024
Metra

Metra 109-TO7 Bruksanvisning

26 September 2024
Metra

Metra 95-8273B Bruksanvisning

26 September 2024
Metra

Metra 95-7822 Bruksanvisning

26 September 2024
Metra

Metra 82-8703 Bruksanvisning

26 September 2024
Metra

Metra 82-9101 Bruksanvisning

26 September 2024
Metra

Metra 95-7021HG Bruksanvisning

26 September 2024
Metra

Metra 82-5608 Bruksanvisning

26 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer