Metra AXDSPX-ETH1 Bruksanvisning

Läs nedan 📖 manual på svenska för Metra AXDSPX-ETH1 (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
AXDSPX-ETH1
I N S TA L L AT I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 8/19/22 INSTAXDSPX-ETH1
ATTENTION: With the key out of the
ignition, disconnect the negative battery
terminal before installing this product. Ensure
that all installation connections, especially the
air bag indicator lights, are plugged in before
reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included
with the aftermarket radio.
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
TABLE OF CONTENTS
Connections ............................................................2
Installation .............................................................3
Troubleshooting .....................................................4
GENERAL MOTORS
2019-UP
ETHERNET DSPX PACKAGE
Designed for GM Ethernet amplifiers
Ethernet data interface w/AXDSP-X (digital signal processor) built-in
Includes an amplifier bypass harness
Retains factory chimes including parking sensor chimes
Retains vehicle’s voice prompts
Chimes and voice prompts go through the aftermarket amplifier and/
or cluster
Selectable 31 Band graphic EQ or 5 Band Parametric EQ
10 individually assignable outputs
• AXDSPX-ETH1 interface
• AXDSPX-ETH1 harness
• LD-DSP-ETH1
• LD-DSP-ETH2
• AXBK-1
• AXDSPX-ETH1 interface harness
(male connectors: 8-pin, 16-pin)
• Amplifier bypass harness
(female connectors: 8-pin black
and 20-pin green )
For refer to Enter the year, make, and model of the vehicle in theDash Disassembly Instructions, metraonline.com. Vehicle Fit Guide for Radio Install kits.
Visit
axxessinterfaces.com
for current application list.
Independent equalization on each of the 10 outputs
Independent high pass, low pass, and bandpass filters
Each channel can be delayed independently up to 10ms
Clipping detection and limiting circuits
Settings adjusted via Bluetooth® in a smart device application (tablet
or mobile phone), compatible with both Android and Apple devices
Read, write, and store configurations for future recall
Password protect feature available in the mobile app
Micro-B USB updatable
2
CONNECTIONS
Assignable outputs labeled
CH 7-10 to be used
for optional amps.
An SPDT relay, Metra part number
E-123, must be used if the amp turn-on
current of all amps exceed 1-amp.
AXBK-1
SUB
Factory Amp
(must be removed)
Factory Amp Harness RCA Jacks
(sold separately) Gray - Front Right +
Gray/Black - Front Right -
White - Front Left +
White/Black - Front Left -
Brown/White * - Center +
Purple - Rear Right +
Purple/Black - Rear Right -
Green - Rear Left +
Green/Black - Rear Left -
Dark Blue/Pink * - Center -
Brown/Yellow - Subwoofer Right +
Brown/Blue - Subwoofer Right -
Green/White - Subwoofer Left +
White/Red - Subwoofer Left -
AXBK-1
CH6
Blue/White - Amp Turn-On Wire
Red/White - Do Not Use
AXDSPX-ETH1
Interface
Applications
LD-DSP-ETH1 2019-2021
LD-DSP-ETH2 2022-UP
3
REV. 8/19/22 INSTAXDSPX-ETH1
INSTALLATION
1. Locate the factory amp (†), unplug all connectors, then remove the amp.
2. Install the AXDSPX-ETH1 harness and make all necessary connections, but leave the amp
turn-on wire disconnected.
3. Plug the 8-pin and 16-pin connectors from the AXDSPX-ETH1 harness into the
AXDSPX-ETH1 interface.
4. Download and install the AXDSP-X app from the Google Play Store Apple App Store or .
5. Open the app and follow the instructions on the Bluetooth Connection tab to pair the
mobile device to the AXDSPX-ETH1. (Figure A)
6. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down button to
save the configuration. (Figure B)
7. Connect the amp turn-on wire from the AXDSPX-ETH1 harness.
8. Identify Click the button to confirm that the AXDSPX-ETH1 is connected properly. If so, a
chime will be heard from the front left speaker or gauge cluster. Test all functions of the
installation for proper operation.
9.
Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup
Instructions tab, or online at Axxessinterfaces.com for an explanation of each tab in the app.
(Figure A)
(Figure B)

Produktspecifikationer

Varumärke: Metra
Kategori: Inte kategoriserad
Modell: AXDSPX-ETH1

Behöver du hjälp?

Om du behöver hjälp med Metra AXDSPX-ETH1 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Metra Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer