Metra 70-6512 Bruksanvisning

Läs nedan 📖 manual på svenska för Metra 70-6512 (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/3
Match wires below to the matching function of each wire on your receiver (refer to instructions supplied with receiver). The wire colors of your
new receiver may, or may not, match the wire colors of the adaptor. Match adaptor and receiver wires by function, disregarding color.
Your receiver illumination wire could be Orange or Orange/White. As with other wires, match this wire to the illumination wire in this harness
by function, not by color. If your receiver does not have an illumination wire, tape off the illumination wire.
Individually tape off any unused wires.
Make speaker wiring connections following instructions on the next page.
Make final wiring connections following instructions on page 3.
Receiver Wiring Adaptor &
Amplifier Bypass Wiring Harnesses
120 70-6512
Revision 08/23/17
STEP 1 -- CONNECT WIRES
*120706512*
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
Copyright 2017 Crutchfield Corporation
A.
B.
C.
D.
E.
Yellow - 12 Volts Constant Power
Black - Chassis Ground
Power Harness
Red - 12 Volts Accessory Power
Orange - Illumination
Receiver Wiring Adaptor &
Amplifier Bypass Wiring Harnesses
120 70-6512
Page 2
STEP 1 -- CONNECT WIRES
STEP 2 -- INSTALL
Route harnesses from receiver to amplifier located behind the glove
box. Disconnect harnesses from amplifier. Plug the bypass harness
into the matching output harness from the amplifier.
White - Left Front Speaker Positive
Violet/Black - Right Rear Speaker Negative
Violet - Right Rear Speaker Positive
Green - Left Rear Speaker Positive
Gray - Right Front Speaker Positive
Gray/Black - Right Front Speaker Negative
Green/Black - Left Rear Speaker Negative
White/Black - Left Front Speaker Negative
Yellow/Blue - Left Dash Speaker Positive
Yellow/Red - Right Dash Speaker Positive
Yellow/Black - Left Dash Speaker Negative
Yellow/Orange - Right Dash Speaker Negative
Make final wiring connections following instructions on page 3.
Copyright 2017 Crutchfield Corporation
(continued)
Wiring Connections
120 70-6512
Tools Required
C. Solder:
Heat wire.
Touch solder to wire,
not to iron.
CRIMP METHOD SOLDER METHOD
Tools Required
Crimp Tool/
Wire Stripper
Crimp Caps
A. Strip wires back 1/2”.
B. Twist wires together and
insert in crimp cap.
C. Squeeze middle of cap
for tight connection.
A. Strip wires back 1/2”.
B. Twist wires together.
D. Tape
Soldering Iron Rosin Core
Solder
Electrical Tape
Copyright 2017 Crutchfield Corporation
Page 3

Produktspecifikationer

Varumärke: Metra
Kategori: Inte kategoriserad
Modell: 70-6512

Behöver du hjälp?

Om du behöver hjälp med Metra 70-6512 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Metra Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer