Metra 95-7822 Bruksanvisning

Metra Inte kategoriserad 95-7822

Läs nedan 📖 manual på svenska för Metra 95-7822 (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 16 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/8
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 4/10/24 INST95-7822
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
I N S TA L L AT I O N I N S T R U C T I O N S
95-7822
KIT FEATURES
• DDIN radio provision
KIT COMPONENTS
• A) Radio trim panel • B) Radio bracket • C) #14 x 1/2” Phillips screw (1)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly 2 ..................................................
Kit Assembly .......................................................... 3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Visit metraonline.com for audio/video and
steering wheel control interface options.
Wire harness: 70-1729
Antenna adapter: 40HD-11
A B C
Honda CR-Z (with factory navigation) 2011-2016
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and remove the lower dash panel
cover above the pocket and remove the
8mm/Phillips screw. (Figures A and B)
2. Unclip and remove the radio from the
dash. (Figure C)
Tip: Start at the top of the radio.
(Figure B) (Figure D)
(Figure C) (Figure A)
3. Unplug and remove the radio.
4. Disassemble the factory NAV unit by
removing the (4) Phillips screws holding
it to the factory dash panel. (Figure D)
Continue to Kit Assembly
REV. 4/10/2024 INST95-7822 3
KIT ASSEMBLY
(Figure B)
1. radio bracketSecure the to the factory
dash panel using the factory hardware.
(Figure A)
2. radio trim panelSnap the into the
factory dash panel. (Figure B)
3. Slide the DDIN radio into the radio
bracket assembly and secure using
hardware supplied with the radio.
(Figure C)
(Figure A) (Figure C)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order of
disassembly. A #14 x 1/2” screw has
been provided if the factory 8mm
mounting screw has been lost or
discarded.

Produktspecifikationer

Varumärke: Metra
Kategori: Inte kategoriserad
Modell: 95-7822

Behöver du hjälp?

Om du behöver hjälp med Metra 95-7822 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Metra Manualer

Metra

Metra 82-8602 Bruksanvisning

14 Januari 2025
Metra

Metra 99-8274 Bruksanvisning

14 Januari 2025
Metra

Metra 95-7642 Bruksanvisning

2 Januari 2025
Metra

Metra 95-7022HG Bruksanvisning

2 Januari 2025
Metra

Metra Axxess AXUSB-TY5 Bruksanvisning

12 December 2024
Metra

Metra 71-017C Bruksanvisning

26 September 2024
Metra

Metra AXSP-HK Bruksanvisning

26 September 2024
Metra

Metra 109-TO7 Bruksanvisning

26 September 2024
Metra

Metra 95-8273B Bruksanvisning

26 September 2024
Metra

Metra 95-7822 Bruksanvisning

26 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 55PUS6551 Bruksanvisning

16 Januari 2025
Philips

Philips 32PHS4504 Bruksanvisning

16 Januari 2025
Electrolux

Electrolux RH36WC40GS Bruksanvisning

16 Januari 2025
Rocstor

Rocstor SolidKVM SK05 Bruksanvisning

16 Januari 2025
Carlsbro

Carlsbro CSD25M Bruksanvisning

16 Januari 2025
Carlsbro

Carlsbro CSD45M Bruksanvisning

16 Januari 2025
Carlsbro

Carlsbro CSD35M Bruksanvisning

16 Januari 2025
On-Q

On-Q EN2050 Bruksanvisning

16 Januari 2025
On-Q

On-Q EN1420 Bruksanvisning

16 Januari 2025
Chief

Chief Kontour KRA300B Bruksanvisning

16 Januari 2025