Metra 95-8912HG Bruksanvisning

Läs nedan 📖 manual på svenska för Metra 95-8912HG (5 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.®MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 4/1/20 INST95-8912HG
I N S TA L L AT I O N I N S T R U C T I O N S
95-8912HG
KIT FEATURES
• ISO DDIN radio provision
• Painted high gloss black to match the factory finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Panel clips (4)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-1761
Antenna Adapter: 40-LX11
Steering wheel control interface: ASWC-1
A B C
Subaru BRZ 2016-Up
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and remove the radio trim panel.
(Figure A)
2. Remove (4) 10mm screws securing the
radio. Slide the radio out, then unplug
and remove. (Figure B)
Continue to Kit Assembly
(Figure A) (Figure B)
REV. 4/1/2020 INST95-8912HG 3
KIT ASSEMBLY
ISO DDIN radio provision
1. Attach the (4) provided to panel clips
the (Figure A)radio trim panel
2. Secure the radio brackets to the radio
using screws supplied with the radio.
(Figure B)
3.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or AXXESS.
Test the radio for proper operation
.
4. Slide the radio into the dash, then secure
using the factory screws. Clip the radio
trim panel over the completed assembly
to complete the installation.
(Figure A) (Figure B)

Produktspecifikationer

Varumärke: Metra
Kategori: Inte kategoriserad
Modell: 95-8912HG

Behöver du hjälp?

Om du behöver hjälp med Metra 95-8912HG ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Metra Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer