Metra 99-8252 Bruksanvisning

Läs nedan 📖 manual på svenska för Metra 99-8252 (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
REV. 6/21/2016 INST99-8252
INSTALLATION INSTRUCTIONS FOR PART 99-8252
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted and textured to match the factory appearance
A) Radio housing trim panel B) Brackets • C) Pocket • D) (2) Panel clips • E) (8) #8 x 3/8” Phillips screws
20;-,(;<9,:
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: • 70-1761 • TYTO-02 (JBL amp)
Antenna Adapter: 40-LX11
Panel removal tool • Phillips screwdriver • 10mm socket wrench
;663:9,8<09,+
Toyota Tundra 2014-up
99-8252
A
Dash Disassembly ................................................. 2
Kit Assembly
ISO DIN radio provision with pocket ...................... 3
ISO DDIN radio provision ...................................... 3
Table of Contents
B C ED
99-8252
2
1. Unsnap and remove the factory
climate controls. (Figure A)
2. Remove (4) 10mm bolts securing
the factory radio and remove it.
Continue to kit assembly
Dash Disassembly
(Figure A)
99-8252
3
Kit Assembly
ISO DIN radio provision with pocket
1. Attach the included panel clips to the
radio housing trim panel. Factory
clips can also be used if desired.
2. Mount the pocket radio to the
brackets with the (4) supplied
#8 x 3/8 Phillips screws. (Figure A)
3. Mount the bracket/pocket assembly
to the with the housing trim panel
remaining (4) supplied #8 x 3/8
screws. (Figure B)
4. Slide the radio into radio brackets
and secure with screws supplied
with the radio. (Figure C)
5. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper
mating adapters from Metra and/or
AXXESS.
6. Mount the new radio assembly into
the dash and reassemble the dash in
reverse order of disassembly.
(Figure C)
(Figure A)
(Figure B)
ISO DDIN radio provision
1. Attach the included panel clips to the
radio housing trim panel. Factory
clips can also be used if desired.
2. Attach the brackets radio to the
housing trim panel using (4) of the
supplied #8 x 3/8” screws.
(Figure A)
3. Slide the radio into the bracket/
radio housing assembly and secure
to the assembly using the screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS.
5. Mount the new radio assembly into
the dash and reassemble the dash in
reverse order of disassembly.
(Figure A)
(Figure B)

Produktspecifikationer

Varumärke: Metra
Kategori: Inte kategoriserad
Modell: 99-8252

Behöver du hjälp?

Om du behöver hjälp med Metra 99-8252 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Metra Manualer

Metra

Metra 71-017C Bruksanvisning

26 September 2024
Metra

Metra AXSP-HK Bruksanvisning

26 September 2024
Metra

Metra 109-TO7 Bruksanvisning

26 September 2024
Metra

Metra 95-8273B Bruksanvisning

26 September 2024
Metra

Metra 95-7822 Bruksanvisning

26 September 2024
Metra

Metra 82-8703 Bruksanvisning

26 September 2024
Metra

Metra 82-9101 Bruksanvisning

26 September 2024
Metra

Metra 95-7021HG Bruksanvisning

26 September 2024
Metra

Metra 82-5608 Bruksanvisning

26 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer