Metra 99-9008 Bruksanvisning

Läs nedan 📖 manual på svenska för Metra 99-9008 (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
REV. 1/25/2016 INST99-9008
Installation instructions for part 99-9008
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
ISO DIN radio provision
DIN radio provision
*
Aftermarket radios are equipped with a trim ring surrounding the face of
the radio. Since some installers prefer the trim ring equipped with the radio
(DIN) and others do not (ISO DIN), this kit was designed to allow the installer
to choose.
A) ISO DIN housing • B) ISO DIN trim plate C) ISO DIN brackets • D) DIN trim plate
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-1784
Antenna Adapter: • 40-VW54
86-9001 radio removal keys • Torx T-10 driver
TOOLS REQUIRED
Volkswagen Beetle 1998-2010
99-9008
A B C
Dash Disassembly ................................................. 2
Kit Assembly
ISO DIN radio provision......................................... 3
DIN radio provision............................................ 4
Table of Contents
D
99-9008
2
1. Insert the long end of the 86-9001
radio removal tool into the slots in
the factory radio (flat sides pointing
out), and then pull the radio out.
Disconnect all connectors and then
remove the radio. (Figure A)
2. For ISO DIN radio installations only,
remove (2) Torx T-10 screws exposed
in the radio cavity. (Figure A)
Continue to kit assembly
Dash Disassembly
(Figure A)
99-9008
ISO DIN radio provision
1. Remove the metal DIN sleeve and
trim ring from the aftermarket radio
.
2. Align the holes in the ISO DIN
brackets with the holes in the radio
and then secure the brackets to
the radio with the
screws included
with the radio. (Figure A)
Note: The screws provided with
certain radios may create a
clearance problem during radio
installation. In these cases it may
be necessary to trim the walls
of the dash bezel to provide the
proper clearance.
3. Locate the factory wiring harness
and antenna connector in the
dash and make all necessary
connections to the radio. Metra
recommends using the proper
mating adapters from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
4. Slide the radio into the radio cavity
until it clicks in. (Figure B)
5. Position the ISO DIN housing over
the radio with the side notches in
the upper corners. Secure with the
(2) Torx T-10 screws removed in
dash disassembly. (Figure C)
6. Attach the ISO DIN trim plate onto
the . (Figure D)ISO DIN housing
(Figure B) (Figure D)
(Figure A)
Kit Assembly
(Figure C)
3

Produktspecifikationer

Varumärke: Metra
Kategori: Inte kategoriserad
Modell: 99-9008

Behöver du hjälp?

Om du behöver hjälp med Metra 99-9008 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Metra Manualer

Metra

Metra 71-017C Bruksanvisning

26 September 2024
Metra

Metra AXSP-HK Bruksanvisning

26 September 2024
Metra

Metra 109-TO7 Bruksanvisning

26 September 2024
Metra

Metra 95-8273B Bruksanvisning

26 September 2024
Metra

Metra 95-7822 Bruksanvisning

26 September 2024
Metra

Metra 82-8703 Bruksanvisning

26 September 2024
Metra

Metra 82-9101 Bruksanvisning

26 September 2024
Metra

Metra 95-7021HG Bruksanvisning

26 September 2024
Metra

Metra 82-5608 Bruksanvisning

26 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer