Metra 99-9604B Bruksanvisning

Metra Inte kategoriserad 99-9604B

Läs nedan 📖 manual på svenska för Metra 99-9604B (5 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/5

REV. 3/15/2016 INST99-9604

Installation instructions for part 99-9604

CAUTION!

All accessories, switches, climate controls panels, and

especially air bag indicator lights must be connected before cycling

the ignition. Also, do not remove the factory radio with the key in the

on position, or while the vehicle is running.

• ISO DIN radio provision with pocket

• ISO DDIN radio provision

• Painted matte black

• A) Radio trim panel • B) Radio brackets

• C) Pocket

• D)

(8) #8 x 3/8”

Phillips pan-head screws

• E) (4) Phillips 5mm x 12mm flat-head screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • N/A

Antenna Adapter: • 40-EU10

• Panel removal tool • Phillips screwdriver

• Torx T-20 screwdriver • Pick tool

TOOLS REQUIRED

Porsche Cayenne 2003-2010

99-9604B

A B

Dash Disassembly ..................................................2

Kit Assembly

– ISO DIN radio provision with pocket ...................... 3

– ISO DDIN radio provision ...................................... 4

Table of Contents

99-9604

Unsnap and remove the trim panel

around the outside of the radio, switches,

and climate controls. (Figure A)

2. Remove (4) T-20 Torx screws to remove

the radio. (Figure B)

There are (2) different methods for

installing this kit. Option 1 does not require

the kit to be secured to the sub-dash

bracket whereas option 2 does. If choosing

option 1, skip to kit assembly. If choosing

option 2, proceed to the next step.

Using a pick tool, release (2) clips securing

the climate control switches

. (Figure C)

3. Remove (6) T-20 Torx screws to remove

the radio sub-dash bracket: (2) at the

top, (2) at the bottom, and (2) inside the

cavity at the bottom. (Figure D)

Note:

It is not necessary to completely

remove the bracket and connectors. Kit

assembly can be performed inside the

vehicle to avoid this if so desired

Continue to kit assembly

Dash Disassembly

(Figure B) (Figure D)

(Figure A) (Figure C)

99-9604

Kit Assembly

ISO DIN radio provision with pocket

Option 1

1. Remove the metal DIN sleeve and

trim ring from the aftermarket radio.

2. Attach the pocket to the lower

section of the using radio brackets

the (4) #8 x 3/8” Phillips pan-head

screws provided. (Figure A)

Slide the radio into the bracket/pocket

assembly, and then secure it using the

screws supplied with the radio. (Figure A)

Note: The screws must be flush in

the radio brackets in order to properly

slide into the factory sub-dash. (4)

5mm x 12mm Phillips flat-head

screws have been supplied if the radio

does not supply these type of screws

Locate the factory wiring harness and

antenna connector in the dash and

complete all necessary connections

to the radio. Metra recommends

using the proper mating adapter from

Metra and/or AXXESS. Test the radio

for proper operation

5. Slide the completed assembly into

the dash.

Note: The radio will simply

compress in.

6. Attach the radio trim panel over the

radio and then secure it using the

(4) factory screws removed in dash

disassembly.

7. Reassemble the dash in reverse

order of disassembly.

Option 2

1. Remove the metal DIN sleeve and

trim ring from the aftermarket radio.

2. Attach the pocket to the lower

section of the radio brackets using

the (4) #8 x 3/8” Phillips pan-head

screws provided. (Figure A)

3. Slide the radio into the bracket/

pocket assembly, and then secure it

using the screws supplied with the

radio. (Figure A)

Note:

The screws must be flush in

the radio brackets in order to properly

slide into the factory sub-dash. (4)

5mm x 12mm Phillips flat-head

screws have been supplied if the radio

does not supply these type of screws

Slide the completed assembly into the

factory sub-dash bracket removed in

dash disassembly, and then secure it

with the (4) #8 x 3/8” pan-head Phillips

screws provided, (2) on each side.

5. Locate the factory wiring harness

and antenna connector in the

dash and complete all necessary

connections to the radio. Metra

recommends using the proper

mating adapter from Metra and/or

AXXESS. Test the radio for proper

operation.

6. Install the radio/sub-dash assembly

back into the dash using the (4)

factory screws removed in dash

disassembly.

Note: The (2) screws inside the

cavity will not be reused.

7. Attach the radio trim panel over the

radio and then secure it using the

(4) factory screws removed in dash

disassembly.

8. Reassemble the dash in reverse

order of disassembly.

(Figure A)

Produktspecifikationer

Varumärke:	Metra
Kategori:	Inte kategoriserad
Modell:	99-9604B

Behöver du hjälp?

Om du behöver hjälp med Metra 99-9604B ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad Metra Manualer

Metra 71-017C Bruksanvisning

26 September 2024

Metra AXSP-HK Bruksanvisning

26 September 2024

Metra 109-TO7 Bruksanvisning

26 September 2024

Metra 95-8273B Bruksanvisning

26 September 2024

Metra 95-7822 Bruksanvisning

26 September 2024

Metra 82-8703 Bruksanvisning

26 September 2024

Metra 88-00-9004 Bruksanvisning

26 September 2024

Metra 82-9101 Bruksanvisning

26 September 2024

Metra 95-7021HG Bruksanvisning

26 September 2024

Metra 82-5608 Bruksanvisning

26 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024

Manhattan 461504 Bruksanvisning

27 Oktober 2024

Sungrow SG125HV Bruksanvisning

27 Oktober 2024

Schneider CCT724319 Bruksanvisning

27 Oktober 2024

Technoline WS 250 Bruksanvisning

27 Oktober 2024

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024

Kupper 12152 Bruksanvisning

27 Oktober 2024

JennAir CARBON24L Bruksanvisning

27 Oktober 2024

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024