Metra AX-SUB28SWC2-6V Bruksanvisning

Metra Inte kategoriserad AX-SUB28SWC2-6V

Läs nedan 📖 manual på svenska för Metra AX-SUB28SWC2-6V (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/3
AX-SUB28SWC2-6V
INSTALL ATION I NSTRUC TION S
REV. 2/14/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
INTERFACE FEATURES
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains the factory AUX-IN jack
• Retains the factory backup camera
• Includes an AX-CAM6V 12-to-6V step-down for the factory camera
• Pre-wired ASWC-1 harness (ASWC-1 sold separately)
INTERFACE COMPONENTS
• AX-SUB28SWC2-6V harness • AX-CAM6V
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape • Wire cutter • Zip ties
AX-SUB28SWC2-6V
Subaru Legacy/Outback (without NAV, with Display radio†)
2013-2014
CAUTION!
All accessories, switches, climate controls panels, and especially air bag indicator lights must be
connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while
the vehicle is running.
† Display radio is a color display radio
AX-SUB28SWC2-6V
INSTALL ATION I NSTRUC TION S
REV. 2/14/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
K PNOWLEDGE IS OWER
Enhance your inst allation and fa brication skills by
enrolling in the most recognized a nd spect ed re
mobile elect nics school in our indust ry.ro
Log onto www.insta llerinstit ute.com or call
800-354-6782 for mo informat ion and take st eps re
towa rd a bett er tomorrow.
®
Metra r ecommends MECP
certified technicians
Connections
Connect the wire to chassis ground, and also to the wire from the AX-CAM6V.Black Black
Connect the wire labeled "Camera Power 6V" to the Red Blue/Red wire from the AX-CAM6V.
Connect the wire labeled “ASWC-1 12V Accessory” to accessory power.Red
Connect the wire to the reverse wire from the radio, and also to the Green/Purple Blue/White
wire from the AX CAM6V.
Connect the Yellow RCA jack to the backup camera input from the radio.
If retaining the factory AUX-IN jack, connect the and RCA jacks to the AUX input Red White
from the radio.
The following (2) wires are for aftermarket multimedia/navigation radios that require these wires
:
Connect the wire to the VSS/speed sense wire.Blue/Pink
Connect the Light Green wire to the parking brake wire.
Installation
1.
After the radio has been tested and verified working properly, remove the key from the ignition.
Connect the AX-SUB28SWC2-6V harness to the wiring harness in the vehicle, then to the ASWC-1.
2. Refer to the ASWC-1 instructions for radio connections and programming. Disregard the
harness that comes with the ASWC-1.

Produktspecifikationer

Varumärke: Metra
Kategori: Inte kategoriserad
Modell: AX-SUB28SWC2-6V

Behöver du hjälp?

Om du behöver hjälp med Metra AX-SUB28SWC2-6V ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Metra Manualer

Metra

Metra 71-017C Bruksanvisning

26 September 2024
Metra

Metra AXSP-HK Bruksanvisning

26 September 2024
Metra

Metra 109-TO7 Bruksanvisning

26 September 2024
Metra

Metra 95-8273B Bruksanvisning

26 September 2024
Metra

Metra 95-7822 Bruksanvisning

26 September 2024
Metra

Metra 82-8703 Bruksanvisning

26 September 2024
Metra

Metra 82-9101 Bruksanvisning

26 September 2024
Metra

Metra 95-7021HG Bruksanvisning

26 September 2024
Metra

Metra 82-5608 Bruksanvisning

26 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer