Metra Axxess AXDSPX-GM31 Bruksanvisning

Metra Inte kategoriserad Axxess AXDSPX-GM31

Läs nedan 📖 manual på svenska för Metra Axxess AXDSPX-GM31 (16 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/16

AXDSPX-GM31

I N S T A L L A T I O N I N S T R U C T I O N S

Google Play Store Apple App Store

iOS 12.1 or higher

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Multimeter

TABLE OF CONTENTS

Installation Options ...............................................2

Installation .............................................................2

Connections ........................................................ 3-4

Mobile App ........................................................ 5-13

Speciﬁcations ....................................................... 14

GM DSP Interface With Pre-Wired Harness

2019-Up

• Includes a DSP (Digital Signal Processor)

• 31 Band graphic EQ

• 10 individually assignable outputs

• Independent equalization on each of the 10 outputs

• Independent high pass, low pass, and bandpass ﬁlters

• Each channel can be delayed independently up to 10ms

• Clipping detection and limiting circuits

• Retains factory parking sensor chimes

• Retains OnStar® voice prompts

• Adjustable chime level

• Designed for non-ampliﬁed models

• Easy behind the radio installation with pre-wired harness

• Bass knob included for level control of subwoofer amp

• Settings adjusted via Bluetooth® in a smart device application (tablet

or mobile phone), compatible with both Android and Apple devices

• Read, write, and store conﬁgurations for future recall

• Password protect feature available in the mobile app

• Micro-B USB updatable

• AXDSPX-GM31 interface

• AXDSPX-GM31 interface harness

• AXDSPX-GM31 vehicle T-harness • Bass knob

APPLICATIONS

Visit axxessinterfaces.com for current application list

Adding a sub to a factory system:

This feature offers the ability to add a subwoofer to a factory system. (refer to page 3)

Adding a full-range amp & sub to a factory system:

This feature offers the ability to add a full-range amp and sub to a factory system. (refer to page 4)

Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing

multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps

combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.

1. Remove the factory radio †, then unplug all connectors.

2. Install the AX-DSPX-GM31 vehicle T-harness to the vehicle and make all necessary

connections, but leave the amp turn-on wire disconnected.

3. AX-DSPX-GM31 vehicle T-harness AX-DSPX-GM31 interface Plug the to the .

4. Plug the AX-DSPX-GM31 interface harness to the AX-DSPX-GM31 interface.

Download and install the AXDSP-X app from the Google Play Store Apple App Store or

6. Bluetooth Connection Open the app then select the tab. Follow the instructions to

pair the mobile device to the interface. Refer to page 6 for more information.

7. Scroll to the Conﬁguration tab then select the vehicle type. Press the ‡ Lock Down

button to save the conﬁguration. Refer to page 7 for more information.

8. Connect the amp turn-on wire.

9. Adjust the settings in the app as desired. Press the ‡ button to save any Lock Down

new conﬁgurations.

† Refer to Metra online for dash disassembly. If Metra makes a dash kit for the vehicle,

disassembly will be within those instructions.

‡ Anytime the interface is locked down the key must be cycled off then back on

INSTALLATION OPTIONS INSTALLATION

REV. 8/4/2020 INSTAXDSPX-GM31

Factory Radio

Keep Connected

Any remaining wires

tape off and disregard

Black - Ground

Orange - Control

Bass Knob

Factory Radio Harness

Interface

Any remaining wires

tape off and disregard

Vehicle T-Harness

Blue/White - Amp Turn-On Wire

These outputs can be used for

additional sub amps, or for adding

onto the em at a later datesyst

RCA Jacks

(sold separately)

ADDING A SUB TO A FACTORY SYSTEM

Produktspecifikationer

Varumärke:	Metra
Kategori:	Inte kategoriserad
Modell:	Axxess AXDSPX-GM31
Färg på produkten:	Crème
Höjd:	248 mm
Användarmanual:	Ja
Internationell säkerhetskod (IP):	IP66
GPS:	Nee
Placeringsstöd:	Binnen & buiten
Anslutningsteknik:	Bedraad
Ethernet LAN:	Nee
Monteringsmetod:	Muur
Maximal upplösning:	811 x 508 Pixels
Strömutgång (volt):	+12V
Minimal belysning:	0.01 Lux
Inbyggd hårddisk:	Nee
Nattseende:	Ja
LED-typ:	IR
Brännvidd:	5 - 50 mm
Analog signalformat:	NTSC, PAL
Optisk sensorstorlek:	1/3 "
Anslutning för nätadapter:	Ja
Bildsensortyp:	CCD
Optisk zoom:	- x
Kamerans slutartid:	1/100000 s
Gränssnitt:	BNC
vitbalans:	Auto
Typ kamerasluter:	Elektronisch
Signal-brusförhållande:	50 dB
Antal TV-linjer:	540
Dag/nattläge:	Ja
Antal LED-belysning:	50
Wide Dynamic Range (WDR):	Ja
Strömförbrukning (typiskt):	5.2 W
Drifttemperatur (TT):	-10 - 50 °C
Relativ luftfuktighet i drift (VV):	0 - 96 procent
NTSC-upplösningar:	811 x 508 Pixels
PAL-upplösningar:	795 x 596 Pixels