Ozito OZBG150WAU Bruksanvisning
Läs nedan 📖 manual på svenska för Ozito OZBG150WAU (3 sidor) i kategorin Sander. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/3
size 445 x 210 mm
Danger! - Read the operating instructions to re-
duce the risk of inquiry
Caution! Wear ear-mus. The impact of noise
can cause damage to hearing.
Caution! Wear a breathing mask. Dust which
is injurious to health can be generated when
working on wood and other materials. Never use
the device to work on any materials containing
asbestos!
Caution! Wear safety goggles. Sparks gene-
rated during working or splinters, chips and dust
emitted by the device can cause loss of sight.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
OZBG150WAU
GB Additonal operating & safety instructions Bench Grinder
Service information
We have competent service partners in all countries named on the guarantee certicate whose contact
details can also be found on the guarantee certicate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts*
Consumables* Grinding/sanding disks
Missing parts
* Not necessarily included in the scope of delivery!
In the eect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Plea-
se ensure that you provide a precise description of the problem and answer the following questions in all
cases:
• Did the equipment work at all or was it defective from the beginning?
• Did you notice anything (symptom or defect) prior to the failure?
• What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Mayr/Product-ManagementWeichselgartner/General-Manager
explains the following conformity according to EU directives and norms for
the following product
Bench Grinder OZBG150WAU (Ozito)
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X 2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X 2011/65/EU
X 2006/42/EC
Annex IV
Noti ed Body:
Noti ed Body No.:
Reg. No.:
2000/14/EC_2005/88/EC
Annex V
Annex VI
Noise: measured LWA = dB (A); guaranteed LWA = dB (A)
P = KW; L/Ø = cm
Noti ed Body:
2012/46/EU
Emission No.:
Standard references: EN 62841-1; EN 61029-2-4; EN 55014-1;
EN 55014-2; EN 61000-3-2; EN 61000-3-3
Landau/Isar, den 02.08.2016
First CE: 16 Archive-File/Record: NAPR014359
Art.-No.: 44.722.65 I.-No.: 11016 Documents registrar: Robert Gehard
Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
Declaration of conrmity
size 445 x 210 mm
Items supplied
Please check that the article is complete as
specied in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
• Open the packaging and take out the equip-
ment with care.
• Remove the packaging material and any
packaging and/or transportation braces (if
available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for
transport damage.
• If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suocating!
Proper use
The bench grinder is a multi-function tool for the
rough and precision grinding of metals, plastics
and other materials using a selection of grinding
wheels.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Technical data
Rated voltage: 230 V ~ 50 Hz ...............................
Power rating: 150 W S2 30 min ...........................
Idle speed n0: .......................................2,950/min
Grinding wheel diameter: 150 mm .......................
Grinding wheel thickness: 16 mm ........................
Grinding wheel hole diameter: 12.7 mm ..............
Max. peripheral speed: 23,169 m/s .......................
Protection class: I .................................................
Load factor:
A load factor of S2 30 min (intermittent periodic
duty) means that you may operate the motor
continuously at its nominal power level (150 W)
for no longer than the time stipulated on the spe-
cications label (30 minutes ON period). If you fail
to observe this time limit the motor will overheat.
During the OFF period the motor will cool again to
its starting temperature.
Sound and vibration
Sound and vibration values were measured in
accordance with EN 61029.
LpA sound pressure level ........................ 63 dB(A)
KpA uncertainty ............................................. 3 dB
LWA
sound power level ..........................76 dB(A)
KWA uncertainty ............................................. 3 dB
Wear ear-mus.
The impact of noise can cause damage to
hearing.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 61029.
Vibration emission value ah ≤ 2.5 m/s2
K uncertainty = 1.5 m/s2
The specied vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specied value
in exceptional circumstances.
The specied vibration value can be used to
compare the equipment with other electric power
tools.
The specied vibration value can be used for initi-
al assessment of a harmful eect.
Keep the noise emissions and vibrations to a
minimum.
• Only use appliances which are in perfect wor-
king order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever
necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in ac-
cordance with instructions, certain residual
risks cannot be rules out. The following ha-
zards may arise in connection with the equip-
ment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protecti-
on is used.
3. Health damage caused by hand-arm vibra-
tions if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to
the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.
Produktspecifikationer
| Varumärke: | Ozito |
| Kategori: | Sander |
| Modell: | OZBG150WAU |
Behöver du hjälp?
Om du behöver hjälp med Ozito OZBG150WAU ställ en fråga nedan och andra användare kommer att svara dig
Sander Ozito Manualer
4 Oktober 2024
3 Oktober 2024
20 September 2024
20 September 2024
4 September 2024
3 September 2024
31 Augusti 2024
27 Augusti 2024
20 Augusti 2024
27 Juli 2024
Sander Manualer
- Sander Bosch
- Sander AEG
- Sander DeWalt
- Sander Arendo
- Sander Silverline
- Sander Ferm
- Sander Workzone
- Sander Gude
- Sander Far Tools
- Sander Makita
- Sander Tryton
- Sander Hitachi
- Sander Black And Decker
- Sander Vonroc
- Sander Maestro
- Sander Stanley
- Sander Skil
- Sander Hyundai
- Sander Hilti
- Sander Ryobi
- Sander Festool
- Sander Metabo
- Sander Parkside
- Sander Worx
- Sander Meec Tools
- Sander Milwaukee
- Sander Hikoki
- Sander Dremel
- Sander Hazet
- Sander Einhell
- Sander Maktec
- Sander Bort
- Sander Craftsman
- Sander Power Craft
- Sander Powerplus
- Sander Porter-Cable
- Sander Trotec
- Sander Topcraft
- Sander Gamma
- Sander Gastroback
- Sander Matrix
- Sander Kress
- Sander Bavaria
- Sander Flex
- Sander Duro
- Sander Mafell
- Sander Varo
- Sander Max
- Sander Truper
- Sander Kinzo
- Sander Cocraft
- Sander Toolcraft
- Sander RIDGID
- Sander Rupes
- Sander Batavia
- Sander Proxxon
- Sander Fein
- Sander Black Decker
- Sander Stomer
- Sander Elu
- Sander Global
- Sander Rikon
- Sander Duro Pro
- Sander Alpha Tools
- Sander Toolson
- Sander Ribimex
- Sander FIXIT
- Sander Einhell Bavaria
- Sander Ergotools Pattfield
- Sander McKenzie
- Sander Proviel
- Sander Bavaria By Einhell
- Sander THUN
- Sander Pevec
- Sander Handwerk
- Sander TAURUS Titanium
- Sander Stalco
Nyaste Sander Manualer
27 Oktober 2024
20 Oktober 2024
19 Oktober 2024
14 Oktober 2024
14 Oktober 2024
10 Oktober 2024
8 Oktober 2024
8 Oktober 2024
6 Oktober 2024
5 Oktober 2024