Rikon 50-112 Bruksanvisning
Läs nedan 📖 manual på svenska för Rikon 50-112 (18 sidor) i kategorin Sander. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/18
www.rikontools.com
50-112M3
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
The serial number can be found on the specication label on your machine.
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167
4 x 36 Belt / 6 Disc Sander” ” ”
IMPORTANT! Safety is the single most important consideration in the operation of this equipment.
The following instructions must be followed at all times.
There are certain applications for which this tool was designed. We strongly recommend that this tool
not be modied and/or used for any other application other than that for which it was designed. If you
have any questions about its application, do not use the tool until you have contacted us and we have
advised you. General Safety Warnings
KNOW YOUR POWER TOOL. Read the owner’s manual carefully. Learn the tool’s
applications, work capabilities, and its specic potential hazards.
ALWAYS KEEP VISITORS AWAY FROM RUNNING MACHINES.
All visitors should be kept a safe distance from the work area.
ALWAYS MAKE THE WORKSHOP CHILDPROOF.
Childproof with padlocks, master switches, or by removing starter keys.
NEVER OPERATE A TOOL WHILE UNDER THE INFLUENCE OF DRUGS,
MEDICATION, OR ALCOHOL.
ALWAYS WEAR PROPER APPAREL.
Never wear loose clothing or jewelry that might get caught in moving parts. Rubber-soled footwear is
recommended for the best footing.
ALWAYS USE SAFETY GLASSES AND WEAR HEARING PROTECTION.
Also use a face or dust mask if the cutting operation is dusty.
NEVER OVERREACH.
Keep your proper footing and balance at all times.
ALWAYS GROUND ALL TOOLS.
If your tool is equipped with a three-pronged plug, you must plug it into a three-hole electric receptacle.
If you use an adapter to accommodate a two-pronged receptacle, you must attach the adapter plug to a
known ground. Never remove the third prong of the plug.
ALWAYS AVOID DANGEROUS ENVIRONMENTS.
Never use power tools in damp or wet locations. Keep your work area well lighted and clear of clutter.
ALWAYS REMOVE THE ADJUSTING KEYS AND WRENCHES FROM TOOLS AFTER USE.
Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before
turning it on.
ALWAYS KEEP YOUR WORK AREA CLEAN. Cluttered areas and benches invite accidents.
NEVER STAND ON TOOLS.
Serious injury could occur if the tool is tipped or if the cutting tool is accidentally
2
Operator Safety: Required Reading
ALWAYS CHECK FOR DAMAGED PARTS.
Before initial or continual use of the tool, a guard or other part that is damaged should be checked to
assure that it will operate properly and perform its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may aect its
operation. A guard or other damaged parts should immediately be properly repaired or replaced.
ALWAYS DISCONNECT TOOLS.
Disconnect tools before servicing and when changing accessories such as blades, bits, and cutters.
ALWAYS AVOID ACCIDENTAL STARTING.
Make sure switch is in “OFF” position before plugging in cord.
NEVER LEAVE TOOLS RUNNING UNATTENDED.
Special Safety Rules For Belt & Disc Sanders
SAVE THESE INSTRUCTIONS.
Refer to them often.
3
1. Do not operate this machine until you have read all of the following instructions.
2. Do not attempt to operate this machine until it is completely assembled.
3. Do not turn ON this machine if any pieces are missing.
4. If you are not familiar with the operation of the machine, obtain assistance from a qualied person.
5. It is highly recommended that this machine be rmly mounted to a at and secure work surface or
stand.
6. Always wear protective eyewear prior to operating this machine.
7. Do not operate this machine if you are under the inuence of drugs and/or alcohol.
8. Remove all jewelry prior to operating this machine.
9. Do not wear any gloves while operating this machine.
10. Always make sure the power switch is in the OFF position prior to plugging in the machine.
11. Always make sure the power switch is in the OFF position when doing any assembly or setup
operation.
12. Always wear a dust mask and use adequate dust collection and proper ventilation. Use of sanders can
produce harmful particles while sanding certain types of woods.
13. The use of any accessories or attachments not recommended may cause injury to you and damage
your machine.
14. This machine must be properly grounded.
15. Abrasive discs and belts should be the recommended width and length of the manufacturer.
16. Always keep your face and hands clear of moving parts such as belts and pulleys.
17.Keep power supply cords free of moving parts of the sander. Damaged cords can result in electric
shock.
18. Maintain a 1/16” clearance between the sanding disc, sanding belt and tables
19.Always support the workpiece with the table or backstop.
20. Remove material or debris from the work area. Keep work area neat and clean.
21.Keep these instructions for future reference.
California Proposition 65 Warning
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Your risk from
exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in
a well-ventilated area and with approved safety equipment, such as dust masks that are
specially designed to lter out microscopic particles.
For more information go to www.P65Warnings.ca.gov/wood.
Produktspecifikationer
| Varumärke: | Rikon |
| Kategori: | Sander |
| Modell: | 50-112 |
Behöver du hjälp?
Om du behöver hjälp med Rikon 50-112 ställ en fråga nedan och andra användare kommer att svara dig
Sander Rikon Manualer
28 December 2024
28 December 2024
28 December 2024
28 December 2024
28 December 2024
25 September 2024
20 September 2024
12 September 2024
12 September 2024
10 September 2024
Sander Manualer
- Sander Bosch
- Sander AEG
- Sander DeWalt
- Sander Arendo
- Sander Silverline
- Sander Ferm
- Sander Workzone
- Sander Ozito
- Sander Gude
- Sander Far Tools
- Sander Makita
- Sander Tryton
- Sander Hitachi
- Sander Black And Decker
- Sander Vonroc
- Sander Maestro
- Sander Stanley
- Sander Skil
- Sander Hyundai
- Sander Hilti
- Sander Ryobi
- Sander Festool
- Sander Metabo
- Sander Parkside
- Sander Worx
- Sander Meec Tools
- Sander Milwaukee
- Sander Hikoki
- Sander Dremel
- Sander Hazet
- Sander Einhell
- Sander Maktec
- Sander Bort
- Sander Craftsman
- Sander Power Craft
- Sander Powerplus
- Sander Porter-Cable
- Sander Trotec
- Sander Topcraft
- Sander Gamma
- Sander Gastroback
- Sander Matrix
- Sander Kress
- Sander Bavaria
- Sander Flex
- Sander Duro
- Sander Mafell
- Sander Fieldmann
- Sander Varo
- Sander Max
- Sander Truper
- Sander Kinzo
- Sander Bruder Mannesmann
- Sander Cocraft
- Sander Herkules
- Sander Meister Craft
- Sander Toolcraft
- Sander RIDGID
- Sander Rupes
- Sander Batavia
- Sander Proxxon
- Sander Fein
- Sander Black Decker
- Sander Stomer
- Sander Elu
- Sander Global
- Sander King Craft
- Sander Powertec
- Sander Duro Pro
- Sander Alpha Tools
- Sander Toolson
- Sander Toledo
- Sander Ribimex
- Sander FIXIT
- Sander Einhell Bavaria
- Sander Ergotools Pattfield
- Sander McKenzie
- Sander Proviel
- Sander Bavaria By Einhell
- Sander THUN
- Sander Prowork
- Sander Pevec
- Sander Handwerk
- Sander TAURUS Titanium
- Sander Stalco
Nyaste Sander Manualer
29 December 2024
29 December 2024
29 December 2024
27 December 2024
27 December 2024
27 December 2024
27 December 2024
27 December 2024
27 December 2024
27 December 2024